CONVERTITORE DC-DC 2.5-30V 5A Step Down XL4015 CORRENTE Regolabile LED DISPLAY

EUR 9,00 Compralo Subito, EUR 2,80 Spedizione, 14-Giorno Restituzione, Garanzia cliente eBay
Venditore: electron-it ✉️ (4.392) 100%, Luogo in cui si trova l'oggetto: Asti, IT, Spedizione verso: EUROPE, Numero oggetto: 113165650265 CONVERTITORE DC-DC 2.5-30V 5A Step Down XL4015 CORRENTE Regolabile LED DISPLAY.

Se acquisti più pezzi di questo articolo, potresti risparmiare sulla spedizione!

Riempi il carrello e clicca sul pulsante 'RICHIEDI IL TOTALE AL VENDITORE' o contattaci per offerta personalizzata!

Regolatore DC-DC

STEP DOWN (Chip XL4015)

CORRENTE uscita REGOLABILE/ COSTANTE

Ingresso: 5-30V

Uscita: 2,5-30V / 0-5Amax (4,5A continui)

Doppio Display 0.28" per visualizzare 'VOLT + AMPERE'

UTILIZZI:

ALIMENTATORE Stabilizzato Step Down con limitazione corrente;

Caricabatteria Litio, NiCd, Piombo;

Alimentazione diodi Illuminazione LED a corrente Costante.

Dotato di: Trimmer per regolare la TENSIONE di uscita: 2.5-30V.   (la tensione di uscita minima non può essere minore di 2.5V pena l'instabilità della corrente di uscita) Trimmer per regolare la CORRENTE max di uscita: 0- 5A. Display doppio per visualizzare Tensione e Corrente in uscita. 3 Led indicano lo stato a seconda dell'utilizzo: funzionamento a corrente costante, Carica Batteria in corso, Carica completata. (Nota: Non collegare insieme i poli IN- e OUT- : non sono la stessa cosa) ------------------------------------------------------------ SPECS: Constant current/voltage 5-30V 0-5A buck regulator with 2 LED displays to show output V and I Note the current sensor is in the negative output (0v) because of this you must use all 4 terminals ,the –in and –out are not connected together as a common , ie the load must be connected to the output terminals not +out and - in This unit can be used to supply a set voltage with a current limit or used to supply a constant current supply as is needed to drive a LED lamp , to do this set to the max voltage and use the current pot Size: 51 x 27 x 21mm (L x W x H) Module Properties: non-isolated constant current and voltage module Rectification: non-synchronous rectification Input voltage: 5V-30V Output voltage: 2.5V-30V Output current: adjustable maximum 5A Conversion efficiency: 95% (the highest) Switching frequency: 300KHz Output ripple: 50mV (max) 20M bandwidth Load Regulation: ± 0.5% Voltage Regulation: ± 2.5% Display refresh : 200mS Battery Charging Usage 1. Determine the float voltage and charge current that you need to charge the battery, the input voltage of the module; 2. Adjust the constant voltage potentiometer, adjust the output voltage to 5V or so. 3. With the multimeter 10A current block output short-circuit current measurement, while adjusting the constant current potentiometer to output current to a predetermined charge current value; 4. Charging the turn-on lamp current is 0.1 times the default charge current (constant current value). 5. Adjust the constant voltage potentiometer to make the output voltage reach the float voltage; 6. Connect the battery and try charging. (1,2,3,4,5 steps for the module input power, the output is not connected to the battery.) LED constant current drive to use 1. Determine the operating current and maximum operating voltage that you need to drive the LED; 2. Adjust the constant voltage potentiometer, adjust the output voltage to 5V or so. 3. With the multimeter 10A current block output short-circuit current measurement, and adjust the constant current potentiometer to output current to reach the predetermined LED operating current; 4. Adjust the constant voltage potentiometer to make the output voltage reach the highest working voltage of LED; 5. Connect the LED, test machine. (1,2,3,4 steps for the module input power, the output no load LED lights.) Communication Protocol Description 1. This module has the function of communication with the computer. Can facilitate the computer to read the module current and voltage data, 2. As the output of the module is TTL level, to achieve and computer communications, but also the level of conversion back to the computer can identify the RS232 level, need to use this cp2102 usb transfer TTL moduleTo achieve the conversion. 3. The communication protocol is as follows: Baud rate: 9600 Bps BB CC ADDR 00 XX XX CRC (current return command) BB CC ADDR 01 XX XX CRC (voltage return command) BB CC for the header (2 bytes) ADDR is the module address (1 byte) 00 is a read current command (1 byte) 01 is the voltage read command (1 byte) XX XX Any value (2 bytes) CRC CRC check (1 byte)

Peso conf: 32 gr

  • Condition: Nuovo
  • Colore principale: Nero
  • Marca: ELECTRON ITALIA

PicClick Insights - CONVERTITORE DC-DC 2.5-30V 5A Step Down XL4015 CORRENTE Regolabile LED DISPLAY PicClick Esclusivo

  •  Popolarità - 37 utenti che lo osservano, 0.0 nuovi utenti che lo osservano ogni giorno, 2.075 days for sale on eBay. Super quantità elevata osservato. 147 venduti, 10 disponibili.
  •  Miglior Prezzo -
  •  Venditore - 4.392+ oggetti venduti. 0% feedback negativo. Grande venditore con molto buone risposte positive e oltre 50 recensioni.

Persone Apprezzato Anche PicClick Esclusivo