Window Cleaning Water Pump And Controller Panel For Water Fed Pole.
Water Pump flow controller and
Seaflo 22 Series 100psi diaphragm pump. Pre-wired and fixed to a solid light weight panel.
Digital display pump controller increases the pump from 1 to 100 in increments of 1
To switch the pump on/off just press the dial.
Display can be set to soft start.
The 100psi self priming diaphragm water pump has a built in pressure switch so there is no need for an auto dead end detection controller.
Both the pump and controller are fixed to a light weight PVC panel measuring 300mm long x 195mm wide .
The panel has pre-drilled holes ready to be fixed to the ply lining of your van
The controller and pump have already been connected together. From the connector there is a cable approximately 1 metre long
with heavy duty positive and negative crocodile clips so you just connect them to your own battery.
A fuse is fitted to protect the controller if the battery terminals are wrongly connected.
The pump comes with hose already connected and a hose accessory adapter so all that is needed is a hosepipe with
a hose end connector on.