0-99.999 V Interfaccia non isolata display digitale voltmetro 5 bit voltmetro DC

EUR 21,53 Compralo Subito, Spedizione gratuita, 30-Giorno Restituzione, Garanzia cliente eBay
Venditore: fibersplicer ✉️ (302) 98.3%, Luogo in cui si trova l'oggetto: Shenzhen, CN, Spedizione verso: WORLDWIDE, Numero oggetto: 385168552022 0-99.999 V Interfaccia non isolata display digitale voltmetro 5 bit voltmetro DC. Description   KV-DVM100V Non-Isolated Interface Digital Display Voltmeter 5-bit High-precision DC Voltmeter 0-99.999V Description: - The voltmeter head adopts the scheme of high-precision reference + high-precision sampling resistance, with accurate measurement and high resolution. - The 1M ohm high resistance input resistor can be used to measure the weaker (low current drive capability requirement) signal, which has little impact on the measured system. - The bipolar design scheme is adopted, which can measure two-way positive and negative voltages up to ± 100V. The voltage can be measured normally without deliberately distinguishing wiring. - The module will not work when the power supply is connected reversely, but it will not damage the circuit. - If the input overload voltage is high and the input voltage reaches 150V, the circuit will not be damaged. When the voltage recovers to plus or minus 100V, the module will immediately measure the voltage normally without restarting. - The module integrates serial port communication function (non-isolated version: TTL serial port; isolated version: 485 interface). The module voltage data can be read back by SCM, computer (USB to serial port module is required) and other devices. For Modbus protocol is adopted for large-scale integration and industrial application. Parameter: - Model: KV-DVM100V (Non-isolated version) - Type: voltmeter - Power supply voltage: 4~30V - Measuring range: 0~±100V - Input impedance: 1M Ω - Product power consumption: 15mA (min: 14mA typ: 15mA max: 16mA) - Display resolution: 1mV - Measurement accuracy: 0.02%+0.04%, ±(the quantity range%) (Tcal23℃±5℃) - Reverse connection protection of power supply: reverse connection voltage≤30V) - Maximum input voltage: 150V - Communication interface: UART_3.3V (9600Baud; 8Bits; None Parity; 1Stop Bit) - Communication protocol: Modbus (support OXO3, OXO6 order) - Weight: 14.5 ± 1g - Size: 29 x 48 x 22mm (error±1mm) - Operating temperature: -15 - +85℃ FAQ: Q: What happens when the voltage measurement shows that it is always drifting? A: When testing after receiving the product, users need to ensure the stability of the voltage to be tested before accurately measuring the stability of the product. Common error operations collected so far include: 1. The battery string resistance scheme is adopted to provide the voltage to be measured: As the voltage of the battery decreases gradually during use, the voltage of the voltage divider also decreases gradually, indicating a natural gradual decrease (please use a stable power supply to generate a voltage test). 2. Use small package resistor or small resistance value resistor to generate voltage: Small package resistors tend to have low power and poor heat dissipation. They will become hot when passing through the current. The resistance value will drift with the temperature drift, and the distributed voltage will also drift. (It is recommended to directly measure the power output terminal to test the module performance, or use a high-power resistor to generate a stable voltage.) Q: Can I use battery for power supply? A: Yes. The module has a wide power supply voltage. As long as the battery voltage is within the nominal power supply range of the module, the battery can be used for power supply. Package Included: - 1 x KV-DVM100V (Non-isolated version) - 1 x cable Note: - Battery is not included. - Do not use a power supply that exceeds the nominal supply voltage range to power the module. - The voltage shall not exceed 30V when the power supply is connected reversely. - The non-isolated meter is a common ground design. If the meter and the circuit to be tested are powered by the same power supply, only the voltage between the negative power supply and other nodes in the circuit can be measured. If multiple meters are required to monitor the voltage between any nodes in the circuit at the same time, please use isolated meters. - The non-isolated meter head is a common ground design, and the negative pole of the meter head power supply terminal and the negative pole of the voltage test terminal are completely connected. If the meter head and the object to be tested are powered by the same power supply, the negative pole of the meter head can only be connected to the negative pole of the power supply of the object to be tested, and the negative pole of the meter head can never be connected to the nodes of the network to be tested other than the negative pole of the power supply, otherwise the network to be tested may not work normally or the network to be tested may be damaged. Wiring rules shall be: measuring positive pole -- connecting -- any point to be measured in the circuit; Measure negative pole -- connecting -- circuit supply negative pole. The black measuring line can only be connected to GND. The isolated type header does not have this problem.

 

Payment Terms   1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms   1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding. Return Terms   If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund. Custom Duties & Taxes   1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping. Feedback   1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.


Am 12.10.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:


Am 13.10.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:

  • Condition: Nuovo
  • Input impedance: 1M Ω
  • Marke: Markenlos
  • Produktart: DC Voltmeter
  • Modell: KV-DVM100V
  • Modifizierter Artikel: Nein
  • Herstellungsland und -region: China
  • Power supply voltage: 4~30V
  • Measuring range: 0~±100V

PicClick Insights - 0-99.999 V Interfaccia non isolata display digitale voltmetro 5 bit voltmetro DC PicClick Esclusivo

  •  Popolarità - 0 utenti che lo osservano, 0.0 nuovi utenti che lo osservano ogni giorno, 533 days for sale on eBay. 0 venduti, 10 disponibili.
  •  Miglior Prezzo -
  •  Venditore - 302+ oggetti venduti. 1.7% feedback negativo. Grande venditore con molto buone risposte positive e oltre 50 recensioni.

Persone Apprezzato Anche PicClick Esclusivo