100
2 Pcs Support De Rideau Bride Montée Latérale Rideaux De Piste Guider
EUR 11,06 Buy It Now
Supporto barra per tende 2%
EUR 9,94 Buy It Now
2 pz tende armadio flange montate lateralmente tende valance argento
EUR 10,55 Buy It Now
2 pz tende estremità flange montate lateralmente staffe tende guardaroba
EUR 9,73 Buy It Now
Supporto bastone tenda 2 pezzi in acciaio inox supporto universale per la casa
EUR 9,72 Buy It Now
Flangia laterale supporto flangia tende armadio scala 2 pz
EUR 10,12 Buy It Now
2 pz flangia laterale presa universale supporto appendiabiti Silver
EUR 10,22 Buy It Now
Cuscinetto flangia basso attrito torsione flangia cuscinetto a sfera proprietà di tenuta per
EUR 2,77 Buy It Now
Cuscinetto a sfera flangia acciaio flangia cuscinetto a sfera resistente per trasmissione
EUR 7,91 Buy It Now
2 Pcs Tende Dell'armadio Flangia Portacanne Flangia Laterale Tenda
EUR 13,01 Buy It Now
Rodamiento Diámetro interior 20 mm, Diámetro exterior 47 mm, Espesor 14 mm para
EUR 21,78 Buy It Now
Rodamiento Adapt. Transmisión Diámetro interior 25 mm, Diámetro exterior 52 mm,
EUR 31,94 Buy It Now
Juego de rodamiento rueda ABS para Opel Astra, Vactra, 86-89, cojinetes, QWB876
EUR 56,63 Buy It Now
Rodamiento Cónico Diámetro interior 31.75 mm, Diámetro exterior 59.13 mm, Espes
EUR 21,78 Buy It Now
Juego de rodamientos rueda ABS para Opel Combo, Astra, VAUXHALL , DAEWOO, QW877
EUR 56,63 Buy It Now
Rodamiento Rueda AV delantera 35x72x21 Renault 12 IR-8016
EUR 21,78 Buy It Now
Rodamiento Rueda AV delantera SEAT 132 31,76x39,15x18,8
EUR 21,78 Buy It Now
Rodamiento Rueda AV delantera 35x72x17 Renault 12 IR-8017 REF 7703090211
EUR 21,78 Buy It Now
Rodamiento Rueda AV delantera 35x72x17 Renault 12 EXT-77
EUR 21,78 Buy It Now
Juego de cojinete de rueda para SEAT Ibiza II FIAT Fiorino II Furgón VW Golf II
EUR 60,98 Buy It Now
Juego de cojinete de rueda para FIAT Fiorino II Furgón SEAT Córdoba VW Golf III
EUR 60,98 Buy It Now
Juego de cojinete de rueda para CITROËN Xsara Furgón PEUGEOT 306 QWB561
EUR 31,94 Buy It Now
Juego de cojinete de rueda para DACIA Logan I RENAULT Clio II QWB564
EUR 75,50 Buy It Now
Juego de cojinete de rueda para RENAULT Rapid Furgón R21 QWB566
EUR 31,94 Buy It Now
Juego de cojinete de rueda para RENAULT Kangoo Laguna QWB560
EUR 75,50 Buy It Now
Juego de cojinete de rueda para CITROËN ZX PEUGEOT 306 Berlina QWB870
EUR 119,06 Buy It Now
Juego de cojinete de rueda para DAEWOO Espero OPEL Astra VAUXHALL Meriva QWB832
EUR 31,94 Buy It Now
Juego de cojinete de rueda para FORD Fiesta Mk4 MAZDA 121 III QWB817
EUR 75,50 Buy It Now
Juego de cojinete de rueda para CITROËN Saxo PEUGEOT 306 QWB798ES
EUR 24,68 Buy It Now
Juego de cojinete de rueda para CITROËN AX SAXO PEUGEOT 106 QWB824
EUR 36,30 Buy It Now
Juego de cojinete de rueda para ALFA ROMEO 145 FIAT Tempra LANCIA Delta QWB79
EUR 65,34 Buy It Now
Juego de cojinete de rueda para CITROËN Visa PEUGEOT 104 TALBOT Samba QWB630ES
EUR 46,46 Buy It Now
Juego de cojinete de rueda para DAEWOO Nexia OPEL Kadett VAUXHALL Cavalier QWB78
EUR 18,88 Buy It Now
Juego de cojinete de rueda para CITROEN AX 1986-1988 PEUGEOT 106 II Furgón QWB6
EUR 90,02 Buy It Now
Juego de cojinete de rueda para Peugeot 205 305 306 309 CITROËN Xantia DWB525 Q
EUR 31,94 Buy It Now
Juego de cojinete de rueda para DACIA 1300 Berlina RENAULT Rodeo 6 R18 R12 Fuego
EUR 26,14 Buy It Now
Juego de cojinete de rueda para FIAT Tempra LANCIA Dedra QWB794
EUR 31,94 Buy It Now
FK Cuscinetto Blocco Alloggiamento SN513 Nuovo - Aperto Scatola
EUR 56,44 Buy It Now
Fsq Cuscinetto Blocco Alloggiamento SNU513-611 Nuovo - Aperto Scatola
EUR 67,72 Buy It Now
SKF FYC 60 TF Unità flangia rotonda a quattro bulloni blocco vite 60 mm foro
EUR 174,55 Buy It Now
fag ucf 205 alloggiamento cuscinetto flangia a quattro bulloni con capezzolo grasso e chiave a brugola
EUR 13,82 0 Bids or Best Offer 11h 11m
Testa articolata filettatura esterna/interna M4-M30 giunto uniball cuscinetto articolato giunto sferico sinistro
EUR 2,68 Buy It Now
KFL8/10/12/15/20/25/30/35 mm flangia alloggiamento blocchi cuscino cuscinetto autoallineante
EUR 2,50 Buy It Now
KFL08-KFL006 alloggiamento cuscinetto flangia alloggiamento cuscinetto verticale alloggiamento alloggiamento foro 8-30 mm
EUR 2,43 Buy It Now
KP KFL blocco cuscini cuscinetto montato alloggiamento 8 10 12 15 17 20 25 30 mm alberi di foro
EUR 2,50 Buy It Now
KP KFL blocco cuscini cuscinetto flangia alloggiamento 8 10 12 15 17 20 25 30 mm alberi di foro
EUR 2,50 Buy It Now
RHP SFT 1.3/16 Unità cuscinetto flangia autolubante ovale 2 bulloni in ghisa x 1
EUR 51,84 Buy It Now
Serie KP KFL Flangia alloggiamento cuscinetti a blocchi cuscino 8 10 12 15 17 20 25 foro 30 mm
EUR 2,38 Buy It Now
Cuscinetti alloggiamento blocco cuscino serie KP KFL 8 10 12 15 17 20 25 30 mm foro
EUR 2,38 Buy It Now
2 pz cuscinetto flangia blocco cuscino 1 pollice cuscino cuscino cuscinetto blocco nuovo
EUR 37,76 Buy It Now or Best Offer
2 pz cuscinetto flangia blocco cuscino 1 pollice cuscino cuscinetto a blocco cuscino ghisa
EUR 37,76 Buy It Now or Best Offer
124049 Dodge F4B-SC-27cm 4 Bullone Flangia Cuscinetto
EUR 22,69 Buy It Now
NTN UCP208-108V70 Ucp 1. 1/2M Cuscino Blocco Cuscinetto Sigillato Nuovo
EUR 85,89 Buy It Now or Best Offer
Originale Dodge Parte: 123690 Cuscinetto 1-1.1cm (Nuovo)
EUR 86,23 Buy It Now or Best Offer
UC207 Cuscinetto TR Alta Qualità 1035 1.1/4
EUR 2,30 0 Bids 23h 1m
UC201 - UC216 INSERTI CUSCINETTI MARCA METRICI - FORO ALTA QUALITÀ 12mm-80mm
EUR 10,07 Buy It Now
SUC201 - SUC217 Foro sferico esterno 12 mm - 85 mm 440/304 acciaio inox
EUR 6,31 Buy It Now
2 pz terminali binari laterali flangia tende binarie scala
EUR 9,76 Buy It Now
2 pz tende per armadio laterali flangia tende per binari armadio
EUR 9,76 Buy It Now
SK Alloggiamento Centrale Miniatura Non Regolabile+1/2pz Cuscinetto 3-20mm Foro SCEGLI TAGLIA
EUR 3,19 Buy It Now
UNM 6309ZZ Cuscinetto a sfera scanalatura profonda fila singola 45x100x25 mm 2 pz
EUR 35,59 Buy It Now
(UCFL201) Cuscinetto di inserimento resistente ad alta resistenza
EUR 16,04 Buy It Now
30mm Cuscinetto Ucfl 206+2 Bulloni Flangiato Fuso Alloggiamento Montaggio Asahi
EUR 28,35 Buy It Now or Best Offer
Sede Cuscinetto Ntn As 206 Japan / #D O1Me 8447
EUR 90,46 Buy It Now
(UC206) 2 pz Cuscinetto di inserimento cuscinetti sferici Cuscinetto a sfera Cuscinetto di inserimento in acciaio
EUR 22,05 Buy It Now
Sede Cuscinetto Ntn As 206 Giappone / #D O1Me 8739
EUR 80,94 Buy It Now
2 Pcs wardrobe rail support Supporti Di Estremità Della Rotaia Staffe Di Fine Te
EUR 13,76 Buy It Now
2 pz armadio presa a barra ingombrante supporto per tende tende tende
EUR 10,50 Buy It Now
2 pz supporto per tende supporti terminali per tende tende tende per binari
EUR 10,60 Buy It Now
Zirconia Cuscinetto Inserto Completo in Ceramica UC203 UC204 UC205 UC 206 UC207 UC209
EUR 48,96 Buy It Now
2 pz supporto asta flangia supporto appendiabiti supporto terminali tenda binari V
EUR 10,50 Buy It Now
M20x1.5 STAFFA TESTA A SFERA HART TESTA ASTA /#8 M1TH 5998
EUR 81,63 Buy It Now
Sede Cuscinetto In Ghisa Ina Gg.fe05 /#8 Z0Z 5990
EUR 26,28 Buy It Now
Alloggiamento del cuscinetto Alloggiamento ZEN TF207 /#8 P0RS 9890
EUR 38,10 Buy It Now
UCP206-30 Cuscinetto blocco cuscino (coppia) cuscinetto diametro interno 30 mm
EUR 31,68 Buy It Now or Best Offer
RHP SCH20EC Unità cuscinetto appendiabiti 20 mm diametro albero autolubante ghisa
EUR 19,57 Buy It Now or Best Offer
Testa girevole estremità stelo GIR40-UK-2RS-A /#8 P0RS 3066
EUR 426,06 Buy It Now
2 pz staffe per tende di montaggio universale staffe per tende
EUR 10,29 Buy It Now
5300 5302 5303 5305 5306 5307 5308/2RS Cuscinetto a sfera angolare a contatto doppia fila
EUR 6,25 Buy It Now
2 pz tende per armadio presa universale presa universale tende per binari
EUR 10,07 Buy It Now
705AC fino a 7308AC cuscinetto a sfera a contatto angolare di precisione cuscinetto mandrino in acciaio
EUR 2,66 Buy It Now
CF5/KR13 - CF20/KR52 Cuscinetto a rullo ago inseguitore camme 304 acciaio inox
EUR 10,61 Buy It Now
NA4900 - NA6920 Cuscinetto a rullo ago ID 10-100 mm OD 22-140 mm spessore 13-71 mm
EUR 2,18 Buy It Now
NATR5PP - NATR50PP Cuscinetto a rullo ago dimensioni 5x16x12x11 - 50x90x32x30
EUR 2,80 Buy It Now
CF3 CF4 CF5 a CF30/KR10 KR12 KR13 a KR85 Cuscinetto a rullo inseguitore camme
EUR 3,08 Buy It Now
SHF8-SHF60 staffa 8 mm-60 mm guida lineare, albero, supporto asta - stampante CNC e 3D
EUR 2,52 Buy It Now
SK8 - SK60 staffa di supporto albero ferroviario lineare asse ottico verticale dimensioni 8 mm-60 mm
EUR 4,34 Buy It Now
SI SIL Estremità canna donna, Cuscinetto Rosa, Filo Mano destra/Sinistra M10 - M16
EUR 4,06 Buy It Now
SI P/K - SIL T/K canna maschio/femmina giunto cuscinetto occhi pesce - tutte le taglie M3-M30
EUR 2,23 Buy It Now
SA T/K a SAL T/K cuscinetto terminale canna maschio giunto rosa filo mano destra/sinistra M4-M30
EUR 2,38 Buy It Now
SI SIL canna maschio/femmina - giunto cuscinetto occhi pesce - tutte le taglie - acciaio inox 304
EUR 5,69 Buy It Now
SQ-RS filo destro testa a sfera giunto canna M5 M6 M8-M22 filo mano destra
EUR 2,38 Buy It Now
1 paio di tende palo palo palo parete supporto tenda flangia base
EUR 9,78 Buy It Now
SQZ5 RS - SQZ22 RS Cuscinetti terminali asta forma di filo M5-M20 filo destro
EUR 2,38 Buy It Now
Cuscinetto a sfera autoallineante doppia fila 1308-1315 albero 40-75 mm - albero cilindrico
EUR 26,41 Buy It Now
Cuscinetto a sfera autoallineante doppia fila 2208-2215 albero 40-75 mm - albero cilindrico
EUR 20,03 Buy It Now
Cuscinetto a sfera autoallineante 2200 2201 - 2207 alesaggio doppia fila 10 mm - albero 35 mm
EUR 3,92 Buy It Now
Cuscinetto a sfera autoallineante doppia fila 1200-1210 albero 10-50 mm - albero cilindrico
EUR 2,52 Buy It Now
Lk - Ucf305 A Ucf310 Cuscino Quadrato Blocco Cuscinetto Alloggiato **Scegli Taglia**
EUR 39,20 Buy It Now
FBK Cuscinetto Blocco Cuscino UCF 204 - UCF 210 20 mm - 50 mm Alloggiamento Albero
EUR 21,77 Buy It Now
- UCP204 A UCP210 FBK CUSCINO BLOCCO CUSCINETTO ALLOGGIATO Base Solida 2 Bulloni - FBK UCP210 Bore 50mm. FBK UCP204 Bore 20mm. FBK UCP205 Bore 25mm. FBK UCP206 Bore30mm. FBK UCP207 Bore 35mm. FBK UCP208 Bore 40mm. FBK UCP209 Bore 45mm. Bearing material:Bearing steel.
- SUCFA 202-206 Cuscinetto a sfera regolabile staffa in acciaio inox 15 mm-30 mm - Model No: SUCFA. SUCFA206 30mm Bore. SUCFA202 15mm Bore. Rolling bearing housing material: stainless steel. Material:Stainless steel. Product Information. SUCFA204 20mm Bore.
- Alloggiamento centrale non regolabile in miniatura da SK8 a SK35 3-20 mm + 1/2 pz cuscinetto - Material of rolling bearing housing: Bearing steel. Place of Origin: China. Whether to import: No.
- LK Cuscino Verticale Blocco Cuscino Alloggiato da UCP 305 a UCP 309 - Scegli la taglia - Rolling bearing housing material:: cast iron. Flat and smooth, clear engraving, special shaft dedicated, complete model.
- SBLF 202-206 Cuscino Blocco Cuscino Acciaio Inox 15mm-30mm Alloggiamento Albero Foro - Stainless steel SBLF206 bore 30mm. Stainless Steel SBLF202 Bore 15mm. Rolling bearing housing material: bearing steel. Stainless steel SBLF203 17mm bore. Stainless steel SBLF204 bore 20mm. Stainless Steel SBLF205 Bore 25mm.
- SUCCL201 SUCFL203 a SUCCL208 Cuscino rombico in plastica nylon cuscinetto alloggiato a blocchi - SUCFL201 plastic housing + 440 bearing SUCFL201 plastic housing + 440 bearing with dust cap. SUCFL203 plastic housing + 440 bearing SUCFL203 plastic housing + 440 bearing with dust cap. SUCFL208 plastic housing + 440 bearing SUCFL208 plastic housing + 440 bearing with dust cap.
- SUCF201 a SUCF210 Cuscino quadrato in plastica nylon cuscinetto alloggiato 12 mm-50 mm - SUCF201 plastic housing + 440 bearing (hole 12mm) SUCF201 plastic housing + 440 bearing plus dust cap. SUCF210 plastic housing + 440 bearing SUCF210 plastic housing + 440 bearing with dust cap. SUCF210 plastic housing + 304 bearing.
- rail end supports 1 paio di tende rotaia parti rotaia estremità supportata flangia S - 2pcs eines Paares x Vorhangstangenhalterung. - können einen Röhrchen, eine Stange oder eine Stange auf Halterung stützen dann Kleidung anhängen. 100 pcs Wachsschnur DIY -Zubehör Hängende Seil für DIY -handgefertigte Halskette.
- SUCHA 201 - SUCHA 206 Cuscinetti a blocchi cuscino sospeso acciaio inox 1 pz - Bearing seat material: stainless steel. Rolling body column number: single rolling. Product Information. Features: high speed, low noise, friction resistant. Place of origin: Mainland China. SUCHA201 (12mm bore).
- LK UCHA204 -UCHA210 Cuscinetto gancio trasportatore a vite autolubante albero 20 mm-50 mm - UCHA204 [20mm bore]. UCHA210 [50mm bore]. Rolling bearing seat material: bearing steel. Number of rolling body rows: Single row. Features: high speed, low noise, friction resistant. Thickness: Other.
- LK UCPA Cuscinetto a blocco cuscino autolubante metrico UCPA204 - UCPA212 **SCEGLI LA TAGLIA** - LK UCPA204 bore 20. LK UCPA212 bore 60. LK UCPA205 Bore 25. LK UCPA206 bore 30. LK UCPA207 bore 35. LK UCPA208 bore 40. LK UCPA209 Bore 45. LK UCPA210 bore 50.
- Ucp 204 Ucp 205 - Ucp 212 Cuscino Blocco Alloggiato **Scegli Taglia** - Our bearing seat: the overall weight is heavier, the base is thicker, the grease nipple is not easy to scale, the steel stamp is clear, and it is easier to distinguish the model. Inferior bearing seat: lighter in weight, thin and brittle material, thinner base, unclear engraving on the steel stamp, unable to distinguish the model.
- 70 ks přírodní pampová tráva dekorace, 17palcová sušená pampová tráva dekorace - 5 barevR4 - The bearing and the shaft are used together to fix the inner ring of the bearing and the shaft. Our bearing seat: the overall weight is heavier, the base is thicker, the grease nipple is not easy to scale, the steel stamp is clear, and it is easier to distinguish the model.
- LK UCF210-213 Cuscinetto autolubante metrico 4 bulloni flangia flangia quadrata blocco cuscino - It has been filled with an appropriate amount of lubricant before leaving the factory. It does not need to be cleaned before installation. The bearing and the shaft are used together to fix the inner ring of the bearing and the shaft.
- LK UCFB 204 - UCFB 210 20 mm - 50 mm 1 pz Cuscinetto a sospensione sferico esterno - ▪️ The outer spherical bearing is a double-layer dust cover, which prevents the intrusion of dust and water, prolongs the service life of the bearing, and has a stronger sealing performance. The bearing and the shaft are used together to fix the inner ring of the bearing and the shaft.
- LK UCFC 205 - UCFC 212 Cartuccia rotonda 4 bulloni Autoluente Cuscinetti alloggiati - ▪️ The outer spherical bearing is a double-layer dust cover, which prevents the intrusion of dust and water, prolongs the service life of the bearing, and has a stronger sealing performance. It has been filled with an appropriate amount of lubricant before leaving the factory.
- 304 Cuscino rombico in acciaio inox cuscinetto a blocchi 2 bulloni base solida SUCCL 204-210 - Inferior bearing seat: lighter in weight, thin and brittle material, thinner base, unclear engraving on the steel stamp, unable to distinguish the model. Do you know the hazards of inferior bearings?.
- LK UCPH 204-UCPH 210 Cuscino montato a blocco cuscinetto alloggiamento diametro 20-50 mm - The bearing and the shaft are used together to fix the inner ring of the bearing and the shaft. ▪️ The outer spherical bearing is a double-layer dust cover, which prevents the intrusion of dust and water, prolongs the service life of the bearing, and has a stronger sealing performance.
- SUCPH201 - SUCPH208 Cuscinetto alloggiato a blocchi cuscino in acciaio inox ** SCEGLI LA TAGLIA** - Material: Stainless Steel. Stainless steel material can be very good waterproof and anti-corrosion, sealing cover for double sealing, use worry-free. Precision combination to reduce working noise. With fine-tuning effect, easy to install, flat but not rough appearance, beautiful and durable.
- Cuscino Blocco Cuscino Acciaio Inox SUCPA201-211 ALESATURA 12-55MM ALBERO SCEGLI TAGLIA - Material:Stainless steel. Stainless steel material can be very good waterproof and anti-corrosion, sealing cover for double sealing, the use of worry-free. Precision combination to reduce the working noise.
- Diametro Cuscinetto Miniatura Acciaio Inox SKP SKFL Cuscino Blocco - Because the bearing has the function of adjusting the heart, so the bearing new part of the bearing inner ring and bearing outer ring has a certain angle, not parallel, this is a. Material: shaft housing 304 + bearing 440.
- SUCF 204 - SUCF 210 Base solida 304 Cuscinetto a blocco cuscino quadrato acciaio inox - Characteristics:Acid and alkali resistant, corrosion resistant and rust proof. Bearing seat is thickened bearing seat, not easy to break, long service life. The outer spherical bearing is double dustproof cover, sealing performance is stronger.
- UCF Cuscinetto autolubante metrico 4 bulloni flangia UCF 203 - UCF 212 17 mm - 60 mm - Our bearing housings have a heavier overall weight, thicker base, less fouling of the oiling nozzles and clearer steel marks, making it easier to distinguish between models.
- Cuscino verticale in acciaio inox cuscinetto a blocchi base solida SUCP 204 - 211 20-55 mm - Product Model:SUCP. Use characteristics: acid and alkali resistance, corrosion resistance and water rust. Top quality stainless steel material, can be very good waterproof, corrosion resistance. Material:stainless steel.
- ^^ REXNORD Dritto Foro Hub 5 Sccb Std - Lotto Da 5 Nuovo (TGX61) - VIENE COME MOSTRATO! Acquisito da una fonte attendibile. Nessun mezzo per testare. Attrezzatura ad alto costo e di alto valore per una frazione del prezzo nuovo/sostitutivo. Nessun accessorio incluso cavo/cavo di alimentazione standard. NUOVO IN SCATOLA? 1.
- Sedile cuscinetto a blocchi cuscino in acciaio inox SUCT 201 a 211 **Scegli materiale** - Material: Stainless steel. High precision finish for easy installation and interchangeability between shafts.
- Boccola Anello Fag Hm 3060 Hm3060 /#8 Z0Z 9107 - Codice produttore:HM3060. DESIGNAZIONE:HM 3060. MANICA - ANELLO. Spediamo dalla Polonia. Spediamo in tutto il mondo. Informazioni importanti!
- 2x SKF FYTJ 30 TF - Cuscinetto a sfera flangiato ovale con set di bloccaggio a vite - Each order incudes two bearing units.
- 2 pz appendiabiti bastone per tende supporto a parete presa per tende tende volanti - Auto Reifen Ventil Einsatz Kern Ausdreher Werkzeug Reparatur w/ 5 Ventileinsätz. Auto Reifen Ventil Einsatz Kern Reparatur Ausdreher Werkzeug w/ 5 Ventileinsätz. Fahrrad Reifen Flecken Punktion Reparatur Patch Gummi Flicken 48 Pcs / Set.
- 2 pz staffa asta per tende in acciaio inox staffa di montaggio universale per casa - Rail End Supports ,Flange Rod Holder ,Wardrobe Rail Support ,Curtain End Brackets ,Closet Pole Socket ,Stainless Pole Socket ,Curtain Pole Hooks ,Curtain Flange Socket ,Closet Pole Sockets ,Curtain Pole Wall Holder.
- 2 pz cavalletto armadio palo rotaia supporto tenda cavalletto - Rail End Supports ,Flange Rod Holder ,Wardrobe Rail Support ,Curtain End Brackets ,Closet Pole Socket ,Stainless Pole Socket ,Curtain Pole Hooks ,Curtain Flange Socket ,Closet Pole Sockets ,Curtain Pole Wall Holder.
- 2 pz aste per tende hardware acciaio inox presa palo armadio - 1-10 pcs Rosenice Gua Sha Guasha Board Tool Green Aventurine Jade For SPA. Wide Application: they are suitable for those closet poles and use them to the shower rod is also fine. 2Pcs of One Pair x Curtain Rod Bracket.
- FK Cuscinetto P206 Unità di alloggiamento... CTRL £80 - FK Bearing P206 Housing Unit…RRP £80. Have 2 …if required…send me a message
- rail end supports 1 paio armadio presa palo tenda asta flangia base Vo - Breite Anwendung: Sie sind für diese Schrankstangen geeignet und verwenden sie auch mit der Duschstange in Ordnung. 2pcs eines Paares x Vorhangstangenhalterung. | Computer, Tablets & Netzwerk |. | Möbel & Wohnen |.
- 1 paio tende estremità morsetti tenda binario parti - 2 Stück eines Paares x Gardinenstangenhalterung. - Das Anbringen der Halterungen an der Wand schafft eine hervorragende Grundlage für eine Vielzahl von Optionen zur Fensterdekoration. - Sie können ein Rohr, eine Stange oder eine Stange an der Halterung befestigen und dann Kleidung aufhängen.
- 1 paio di morsetti estremità tenda asta estremità supportata flangia asta supporto - 2 Stück eines Paares x Gardinenstangenhalterung. - Das Anbringen der Halterungen an der Wand schafft eine hervorragende Grundlage für eine Vielzahl von Optionen zur Fensterdekoration. - Sie können ein Rohr, eine Stange oder eine Stange an der Halterung befestigen und dann Kleidung aufhängen.
- Cuscinetto alloggiato quadrato termoplastico quadrato a 4 bulloni PSF / SUCFPL (scegli taglia + colore) - Food quality thermoplastic housing with a stainless steel insert. Sizes available range from 20mm Bore to 40mm Bore.
- 1 paio di tende palo gancio tenda flangia base tenda asta supporto - 2 Stück eines Paares x Gardinenstangenhalterung. - Das Anbringen der Halterungen an der Wand schafft eine hervorragende Grundlage für eine Vielzahl von Optionen zur Fensterdekoration. - Sie können ein Rohr, eine Stange oder eine Stange an der Halterung befestigen und dann Kleidung aufhängen.
- 1 paio tenda pali estremità morsetti tenda palo supporto parete - Breite Anwendung: Sie sind für diese Schrankstangen geeignet und verwenden sie auch mit der Duschstange in Ordnung. 2pcs eines Paares x Vorhangstangenhalterung. | Handys & Kommunikation |. | Möbel & Wohnen |.
- 1 pz cuscinetto sferico esterno ad alta velocità placcato in acciaio inox montato - Can be fitted into the corresponding concave spherical of the bearing to play the role of self-aligning. 1Pcs Ball Bearings. It is mainly used to bear radial and axial combined loads mainly based on radial load, and generally should not be subjected to axial load alone.
- 1 paio tenda flangia base flangia supporto asta - 2 Stück eines Paares x Gardinenstangenhalterung. - Das Anbringen der Halterungen an der Wand schafft eine hervorragende Grundlage für eine Vielzahl von Optionen zur Fensterdekoration. | Handys & Kommunikation |.
- Nuovo Baldor DODGE F2B-SC-103 Flange-Mount Ball Cuscinetto Unità 124275 F2BSC103 - NUOVO BALDOR DODGE F2B-SC-103 UNITÀ CUSCINETTO A SFERA CON MONTAGGIO FLANGIA 124275 F2BSC103 3224/BF.
- (UCFB207))) Diapositiva interna 10 mm Cuscinetto a sfera a 3 bulloni in acciaio flangia a sfera a 3 bulloni - Optional Style: UCFB207, UCFB208, UCFB209, UCFB210. 1 3-Bolt Ball Flange Bearing. Material: High Carbon Bearing Steel. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.
- RHP PSFT1.3/16CR Unità cuscinetto flangiato auto-argento - The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The Silver-Lube series is a range of corrosion-resistant bearing units specifically for use in industries where frequent thorough washdowns are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range.
- MSF1.3/8 RHP Unità cuscinetto flangia quadrata 4 bulloni albero 1,3/8" - MSF1.3/8 RHP Self-Lube 4 Bolt Flange Bearing Unit 1.3/8" Shaft RHP MSF Flanged Series - also know as Self Lube units. Supplied with a sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication.
- (UCFL201) Cuscinetto blocco cuscino inserto cuscinetto 201/202/203 acciaio ghisa per - Pillow Block Bearing is a kind of bearing unit that combines ball bearing and bearing housing. 1 x Pillow Block Bearing. Constructed of bearing steel and cast iron housing, high strength and durable.
- UCF210 Cuscinetto flangiato a 4 bulloni (SF50) Volvo - UCF210 4 Bolt Flanged Bearing (SF50) volvo.
- UCF210 Cuscinetto flangiato a 4 bulloni (SF50) Volvo - UCF210 4 Bolt Flanged Bearing (SF50) volvo.
- 2 pz Closet Rod End supportata acciaio acciaio acciaio supporto per tenda flangia - 10er Silikon Zehenschutz Zehenpolster Zehenhaube Zehenschoner für Hühneraugen. 7 pcs Edelstahl Ohrreiniger Reiniger Set Ohrenpflege Spirale Graben Ohr Werkzeug. Breite Anwendung: Sie sind für diese Schrankstangen geeignet und verwenden sie auch mit der Duschstange in Ordnung.
- MST 12 fori RHP cuscinetto di presa in ghisa - MST 12 Bore RHP Cast Iron Take Up Bearing. Buyer return, Brand new Take-up units are used to €œtake up€ the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension. Made from cast iron to BS1452 Spherical bearing insert accommodates initial misalignment Nitrile/fabric seals C3 internal radial clearance
- UCPX05 25 mm ghisa 2 bulloni blocco cuscino autolubante cuscinetti alloggiati UCPX - UCPX05 25mm Cast 2-Bolt Iron Pillow Block Self Lube Housed Bearings UCPX. Brand new - sealed packaging
- Snr Ucfe.209 Flangia Quadrata 4 Bulloni + 45,00 Mm Snr Uc209G2 Inserto Cuscinetto 8962
- Flangia alloggiamento KP/KFL cuscinetto a blocchi cuscino 8 10 12 15 17 20 25 30 mm albero foro - Type: KFL / KP Type. Bore: 8 10 12 15 17 20 25 30mm. Material: Zinc Alloy Steel (Housing) + Bearing Steel (Bearing). Precision process, beautiful appearance, smooth surface. Stable performance and durability.
- Serie KP Flangia alloggiamento cuscinetto a blocchi cuscino 8 10 12 15 20 25 30 mm albero foro - Type: KP Type. Bore: 8 10 12 15 17 20 25 30mm. Material: Zinc Alloy Steel (Housing) + Bearing Steel (Bearing). Precision process, beautiful appearance, smooth surface. Stable performance and durability.
- Serie KFL Flangia alloggiamento cuscinetto a blocchi cuscino 8 10 12 15 20 25 30 mm albero foro - Type: KFL Type. Bore: 8 10 12 15 17 20 25 30mm. Material: Zinc Alloy Steel (Housing) + Bearing Steel (Bearing). Precision process, beautiful appearance, smooth surface. Stable performance and durability.
- KP08-KP006 / KFL08-KFL006 cuscinetto alloggiamento cuscinetto eretto eretto flangia albero capanna cuscinetto - KFL08，KFL000，KFL001，KFL002，KFL003，KFL004，KFL005，KFL006. KP08，KP000，KP001，KP002，KP003，KP004，KP005，KP006. Am 16.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt Type: KFL / KP Type.
- KP08 - KP006 cuscinetto alloggiamento cuscinetto eretto eretto flangia CNC cuscinetto rotante albero capanna cuscinetto - KP08，KP000，KP001，KP002，KP003，KP004，KP005，KP006. Am 16.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt KP Series Housing Flange Pillow Block Bearing 8 10 12 15 17 20 25 30mm Bore Shaft. Bore: 8 10 12 15 17 20 25 30mm.
- KFL08-KFL006 cuscinetto alloggiamento cuscinetto verticale flangia cuscinetto a sfera albero CNC capanna cuscinetto - KFL08，KFL000，KFL001，KFL002，KFL003，KFL004，KFL005，KFL006. Am 16.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt.
- UCP202-16 16 mm ghisa 2 bulloni blocco cuscino autolubante cuscinetti alloggiati UCP - Bolt Size M10. Shaft Dia 16.
- SA16T/K Cuscinetto Articolato Assemblato Asta Estremità Cuscinetto Giunto Filo Maschio Auto - Model: SA16T / K. Item Type: Articulated Bearing. Lubrication Status: Boundary lubrication. Assembled male thread self-lubricating rod end joint bearings, tightly connected. The spherical plain bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning and good lubrication.
- Igus EFOM-20 flangia scorrevole - Wird der Ware beigelegt!
- ^^ FAFNIR RSA01 7/16 Cuscinetto Con Alloggiamento (MAL34) - Attrezzatura ad alto costo e di alto valore, acquistata da una fonte affidabile! Siamo pronti a rispondere e risolvere. Non siamo a co. MARZO 2023. Non siamo a conoscenza della storia dell'attrezzatura.
- Motore passo-passo generatore segnale di impulso/regolatore di velocità/modulo controller driver - Nano Sheild. This is pulse module, can provide 2.5 khz-68 kHz frequency, power signal for stepper driver. Screw sheild. OLED LED&RGB. Am 07.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt.
- Driver motore passo-passo controller scheda velocità modulo generatore segnale di impulso - This is pulse module, can provide 2.5 khz-68 kHz frequency, power signal for stepper driver. 45 In 1 Sensor. Battery Protection Board. Am 07.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt.
- Driver motore passo-passo controller scheda velocità modulo generatore segnale di impulso - This is pulse module, can provide 2.5 khz-68 kHz frequency, power signal for stepper driver. Step up module. Adapter Module. Step down module. Wireless module. Display module. GPRS Board. Am 07.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt.
- FRM160/17,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM170/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/6,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/21 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/13,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM240/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM230/13 FAG Anello di localizzazione 2x per alloggiamento
- FRM250/28 Anello di localizzazione FAG 2x per alloggiamento
- FRM260/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM230/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM230/25 FAG Anello di localizzazione 2x per alloggiamento
- FRM250/15 Anello di localizzazione FAG 2x per alloggiamento
- FRM250/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM320/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM270/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM340/28 Anello di localizzazione FAG 2x per alloggiamento
- FRM290/33 Anello di localizzazione FAG 2x per alloggiamento
- FRM280/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM290/17 Anello di localizzazione FAG 2x per alloggiamento
- FRB 11,5/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB 10/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB 10/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB 10,5/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB 12,5/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB 7/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6,5/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB 15,5/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB 9/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB 9/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB 16,5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB 14,5/170 SKF Anello di localizzazione 2x per alloggiamento
- FRB 18/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB 19,5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8,5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB 17,5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB 12,5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB 4,85/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB 7,5/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB 12/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB 21/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB 14/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB 22/215 SKF Anello di localizzazione 2x per alloggiamento
- FRM72/3 Anello di localizzazione FAG 2x per alloggiamento
- FRB 16,5/270 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/230 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/250 SKF Anello di localizzazione 2x per alloggiamento
- FRM62/6,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM72/5 FAG Anello di localizzazione 2x per alloggiamento
- FRB 15/250 SKF Anello di localizzazione 2x per alloggiamento
- FRM62/3 Anello di localizzazione FAG 2x per alloggiamento
- FRB 5/290 SKF Anello di localizzazione 2x per alloggiamento
- FRM72/7 Anello di localizzazione FAG 2x per alloggiamento
- FRM90/4 Anello di localizzazione FAG 2x per alloggiamento
- FRB 13/230 SKF Anello di localizzazione 2x per alloggiamento
- FRM52/4,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM62/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM80/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM80/10,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM100/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM62/7 Anello di localizzazione FAG 2x per alloggiamento
- FRM85/6 Anello di localizzazione FAG 2x per alloggiamento
- FRM90/9 Anello di localizzazione FAG 2x per alloggiamento
- FRM100/9,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM120/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM72/8 FAG Anello di localizzazione 2x per alloggiamento
- FRM110/10 Anello di localizzazione FAG 2x per alloggiamento
- FRM125/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM85/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM100/11,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM110/13 FAG Anello di localizzazione 2x per alloggiamento
- FRM130/15,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM140/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM120/11 Anello di localizzazione FAG 2x per alloggiamento
- FRM110/10,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM140/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM130/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM125/7,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM90/10,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM130/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM170/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM160/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM150/13 FAG Anello di localizzazione 2x per alloggiamento
- FRM160/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM180/18 Anello di localizzazione FAG 2x per alloggiamento
- FRM150/16,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/4,85 Anello di localizzazione FAG 2x per alloggiamento
- FRM140/16 Anello di localizzazione FAG 2x per alloggiamento
- FRM160/6.3 Anello di localizzazione FAG 2x per alloggiamento
- FRM110/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM170/18 Anello di localizzazione FAG 2x per alloggiamento
- FRM160/14 FAG Anello di localizzazione 2x per alloggiamento
- FRM190/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM150/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM180/14,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM150/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/12 FAG Anello di localizzazione 2x per alloggiamento
- FRM200/17,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM170/14,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM190/15,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/19,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/5,1 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/6,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/23 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/14 Anello di localizzazione FAG 2x per alloggiamento
- FRM260/20,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM270/16,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM240/20 Anello di localizzazione FAG 2x per alloggiamento
- FRM300/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM290/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM270/30,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM300/25 FAG Anello di localizzazione 2x per alloggiamento
- FRM320/26,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM280/22,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM340/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM290/17 Anello di localizzazione FAG 2x per alloggiamento
- FRM130/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM130/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM130/15,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM160/14 FAG Anello di localizzazione 2x per alloggiamento
- FRM160/17,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM170/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM160/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM140/16 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM180/14,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM170/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/19,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/13,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/6,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/12 FAG Anello di localizzazione 2x per alloggiamento
- FRM215/14 Anello di localizzazione FAG 2x per alloggiamento
- FRM230/25 FAG Anello di localizzazione 2x per alloggiamento
- FRM270/16,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM260/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM290/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM260/20,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM300/25 FAG Anello di localizzazione 2x per alloggiamento
- FRM270/30,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM300/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM340/28 Anello di localizzazione FAG 2x per alloggiamento
- FR150x5 Anello di localizzazione SNR 2x per alloggiamento
- FRM320/26,5 Anello di localizzazione FAG 2x per alloggiamento
- FR180x14,5 Anello di localizzazione SNR 2x per alloggiamento
- FR80x10,5 Anello di localizzazione SNR 2x per alloggiamento
- FR125x6,5 Anello di localizzazione SNR 2x per alloggiamento
- FR125x10 Anello di localizzazione SNR 2x per alloggiamento
- FR215x6,5 Anello di localizzazione SNR 2x per alloggiamento
- FRM340/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM290/33 Anello di localizzazione FAG 2x per alloggiamento
- FR72x3,5 Anello di localizzazione SNR 2x per alloggiamento
- FR62x7,5 Anello di localizzazione SNR 2x per alloggiamento
- FRB 3,5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8,5/72 SKF Anello di localizzazione 2x per alloggiamento
- FR90x10,5 Anello di localizzazione SNR 2x per alloggiamento
- FRB 5/52 SKF Anello di localizzazione 2x per alloggiamento
- FRB 7,5/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB 3,5/52 SKF Anello di localizzazione 2x per alloggiamento
- FR190x15,5 Anello di localizzazione SNR 2x per alloggiamento
- FRB 4/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5,5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB 7,5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5,5/85 SKF Anello di localizzazione 2x per alloggiamento
- FRB 4/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB 9/90 SKF Anello di localizzazione 2x per alloggiamento
- FR110x10,5 Anello di localizzazione SNR 2x per alloggiamento
- FRB 4/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB 10,5/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB 9/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB 4/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB 3,5/85 SKF Anello di localizzazione 2x per alloggiamento
- FRB 10,5/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB 1/85 SKF Anello di localizzazione 2x per alloggiamento
- FRB 9,5/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB 11/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6,5/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB 4/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB 13/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6,5/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB 14/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB 4/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB 14/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB 13/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB 16/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB 12,5/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8,5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6,25/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB 14,5/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB 17,5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB 12,5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6,5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB 13,5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5.1/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8,5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB 6,5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/170 SKF Anello di localizzazione 2x per alloggiamento
- FRB 22/230 SKF Anello di localizzazione 2x per alloggiamento
- FRB 5/270 SKF Anello di localizzazione 2x per alloggiamento
- FRB 8,5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB 17/290 SKF Anello di localizzazione 2x per alloggiamento
- FRM52/6 Anello di localizzazione FAG 2x per alloggiamento
- FRM52/3 Anello di localizzazione FAG 2x per alloggiamento
- FRM80/9 Anello di localizzazione FAG 2x per alloggiamento
- FRM80/8 Anello di localizzazione FAG 2x per alloggiamento
- FRB9/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB7.5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB9,5/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB4/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB11.5/100 SKF Anello di localizzazione 2x per alloggiamento
- FRB4/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB4/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB7/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB10/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB15,5/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB12,5/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB14,5/170 SKF Anello di localizzazione 2x per alloggiamento
- FRB12.5/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB16,5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB12,5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB16/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/170 SKF Anello di localizzazione 2x per alloggiamento
- FRB14.5/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB8.5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB7.5/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB19.5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB18/170 SKF Anello di localizzazione 2x per alloggiamento
- FRB6.5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB8.5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB12/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB13.5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB13/230 SKF Anello di localizzazione 2x per alloggiamento
- FRB6.5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRM62/6,5 Anello di localizzazione FAG 2x per alloggiamento
- FRB5.1/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/250 SKF Anello di localizzazione 2x per alloggiamento
- FRB22/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB15/250 SKF Anello di localizzazione 2x per alloggiamento
- FRB14/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB8.5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRB21/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/290 SKF Anello di localizzazione 2x per alloggiamento
- FRM80/9 Anello di localizzazione FAG 2x per alloggiamento
- FRB5/215 SKF Anello di localizzazione 2x per alloggiamento
- FRM62/7 Anello di localizzazione FAG 2x per alloggiamento
- FRM72/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM62/3 Anello di localizzazione FAG 2x per alloggiamento
- FRM72/3 Anello di localizzazione FAG 2x per alloggiamento
- FRM90/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM52/6 Anello di localizzazione FAG 2x per alloggiamento
- FRM52/4,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM85/6 Anello di localizzazione FAG 2x per alloggiamento
- FRM62/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM100/11,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM85/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM80/8 Anello di localizzazione FAG 2x per alloggiamento
- FRM72/8 FAG Anello di localizzazione 2x per alloggiamento
- FRM110/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM120/11 Anello di localizzazione FAG 2x per alloggiamento
- FRM80/10,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM90/9 Anello di localizzazione FAG 2x per alloggiamento
- FRM120/14 FAG Anello di localizzazione 2x per alloggiamento
- FRM120/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM80/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM90/10,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM72/7 Anello di localizzazione FAG 2x per alloggiamento
- FRM110/13 FAG Anello di localizzazione 2x per alloggiamento
- FRM110/10,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM100/9,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM100/4 Anello di localizzazione FAG 2x per alloggiamento
- FRM110/10 Anello di localizzazione FAG 2x per alloggiamento
- FRM150/16,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM140/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM170/14,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM120/10 Anello di localizzazione FAG 2x per alloggiamento
- FRM170/18 Anello di localizzazione FAG 2x per alloggiamento
- FRM150/12,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM160/6.3 Anello di localizzazione FAG 2x per alloggiamento
- FRM160/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM180/4,85 Anello di localizzazione FAG 2x per alloggiamento
- FRM190/15,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/17,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/18 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/21 Anello di localizzazione FAG 2x per alloggiamento
- FRM180/12 FAG Anello di localizzazione 2x per alloggiamento
- FRM215/6,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/23 Anello di localizzazione FAG 2x per alloggiamento
- FRM190/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM140/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM230/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM240/20 Anello di localizzazione FAG 2x per alloggiamento
- FRM200/5,1 Anello di localizzazione FAG 2x per alloggiamento
- FRM250/28 Anello di localizzazione FAG 2x per alloggiamento
- FRM215/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM240/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM250/15 Anello di localizzazione FAG 2x per alloggiamento
- FRM230/13 FAG Anello di localizzazione 2x per alloggiamento
- FRM280/22,5 Anello di localizzazione FAG 2x per alloggiamento
- FRM270/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM250/5 FAG Anello di localizzazione 2x per alloggiamento
- FRM280/5 Anello di localizzazione FAG 2x per alloggiamento
- FRM320/5 Anello di localizzazione FAG 2x per alloggiamento
- FR150x13 Anello di localizzazione SNR 2x per alloggiamento
- H2310 FAG Manicotto adattatore
- H2312 FAG Manicotto adattatore
- H319 FAG Manicotto adattatore
- H2320 FAG Manicotto adattatore
- H2317 FAG Manicotto adattatore
- H3024 FAG Manicotto adattatore
- H2324 FAG Manicotto adattatore
- H3126 FAG Manicotto adattatore
- H3028 FAG Manicotto adattatore
- H3030 FAG Manicotto adattatore
- H2328 FAG Manicotto adattatore
- FR72x7,5 Anello di localizzazione SNR 2x per alloggiamento
- FR72x3,5 Anello di localizzazione SNR 2x per alloggiamento
- FR100x9,5 Anello di localizzazione SNR 2x per alloggiamento
- FR120x11 Anello di localizzazione SNR 2x per alloggiamento
- FR80x4 Anello di localizzazione SNR 2x per alloggiamento
- FR110x4 Anello di localizzazione SNR 2x per alloggiamento
- FR120x14 Anello di localizzazione SNR 2x per alloggiamento
- FR130x15,5 Anello di localizzazione SNR 2x per alloggiamento
- FR130x12,5 Anello di localizzazione SNR 2x per alloggiamento
- FR140x16 Anello di localizzazione SNR 2x per alloggiamento
- FR160x5 Anello di localizzazione SNR 2x per alloggiamento
- FR170x12,5 Anello di localizzazione SNR 2x per alloggiamento
- FR150x16,5 Anello di localizzazione SNR 2x per alloggiamento
- FR170x18 Anello di localizzazione SNR 2x per alloggiamento
- FR150x12,5 Anello di localizzazione SNR 2x per alloggiamento
- FR200x17,5 Anello di localizzazione SNR 2x per alloggiamento
- FR160x6,25 Anello di localizzazione SNR 2x per alloggiamento
- FR190x5 Anello di localizzazione SNR 2x per alloggiamento
- FR190x15,5 Anello di localizzazione SNR 2x per alloggiamento
- FR250x15 Anello di localizzazione SNR 2x per alloggiamento
- FR215x6,5 Anello di localizzazione SNR 2x per alloggiamento
- FR160x12,5 Anello di localizzazione SNR 2x per alloggiamento
- FR180x14,5 Anello di localizzazione SNR 2x per alloggiamento
- FR200x21 Anello di localizzazione SNR 2x per alloggiamento
- FR180x4,85 Anello di localizzazione SNR 2x per alloggiamento
- FR200x6,5 Anello di localizzazione SNR 2x per alloggiamento
- FR200x5.1 Anello di localizzazione SNR 2x per alloggiamento
- FR290x5 Anello di localizzazione SNR 2x per alloggiamento
- FR215x14 Anello di localizzazione SNR 2x per alloggiamento
- FR180x12 Anello di localizzazione SNR 2x per alloggiamento
- FR230x5 Anello di localizzazione SNR 2x per alloggiamento
- FR200x13,5 Anello di localizzazione SNR 2x per alloggiamento
- FRB4/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB3.5/52 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/52 SKF Anello di localizzazione 2x per alloggiamento
- FR290x17 Anello di localizzazione SNR 2x per alloggiamento
- FRB8/80 SKF Anello di localizzazione 2x per alloggiamento
- FRB8/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB4/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB8.5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB6/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB10,5/80 SKF Anello di localizzazione 2x per alloggiamento
- FR230x13 Anello di localizzazione SNR 2x per alloggiamento
- FR270x5 Anello di localizzazione SNR 2x per alloggiamento
- FR270x16,5 Anello di localizzazione SNR 2x per alloggiamento
- FRB5.5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB3.5/72 SKF Anello di localizzazione 2x per alloggiamento
- FRB9/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB7.5/62 SKF Anello di localizzazione 2x per alloggiamento
- FRB6.5/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB11/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB3.5/85 SKF Anello di localizzazione 2x per alloggiamento
- FR250x5 Anello di localizzazione SNR 2x per alloggiamento
- FRB1/85 SKF Anello di localizzazione 2x per alloggiamento
- FRB5.5/85 SKF Anello di localizzazione 2x per alloggiamento
- FRB10.5/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB10.5/90 SKF Anello di localizzazione 2x per alloggiamento
- FRB10/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB13/110 SKF Anello di localizzazione 2x per alloggiamento
- FRB14/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB9/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB14/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB9/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB6.5/120 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/140 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/130 SKF Anello di localizzazione 2x per alloggiamento
- FRB12.5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB17.5/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB6.25/160 SKF Anello di localizzazione 2x per alloggiamento
- FRB8.5/150 SKF Anello di localizzazione 2x per alloggiamento
- FRB12.5/170 SKF Anello di localizzazione 2x per alloggiamento
- FRB17.5/200 SKF Anello di localizzazione 2x per alloggiamento
- FRB4.85/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB18/180 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/230 SKF Anello di localizzazione 2x per alloggiamento
- FRB16.5/270 SKF Anello di localizzazione 2x per alloggiamento
- FRB5/270 SKF Anello di localizzazione 2x per alloggiamento
- FRB17/290 SKF Anello di localizzazione 2x per alloggiamento
- H2310 SKF Manicotto adattatore
- H311E SKF Manicotto adattatore
- H312E SKF Manicotto adattatore
- H2313 SKF Manicotto adattatore
- H215 SKF Manicotto adattatore
- H315E SKF Manicotto adattatore
- H2316 SKF Manicotto adattatore
- H218 SKF Manicotto adattatore
- H2319 SKF Manicotto adattatore
- H219 SKF Manicotto adattatore
- H2326 SKF Manicotto adattatore
- H2320 SKF Manicotto adattatore
- H2328 SKF Manicotto adattatore
- H3130 SKF Manicotto adattatore
- H2332L SKF Manicotto adattatore
- H2324E SKF Manicotto adattatore
- H3126 SKF Manicotto adattatore
- H206 FAG Manicotto adattatore
- H3128L SKF Manicotto adattatore
- H210 FAG Manicotto adattatore
- H2330 SKF Manicotto adattatore
- H2307 FAG Manicotto adattatore
- H205 FAG Manicotto adattatore
- H3132 SKF Manicotto adattatore
- H2305 FAG Manicotto adattatore
- H305 FAG Manicotto adattatore
- H306 FAG Manicotto adattatore
- H309 FAG Manicotto adattatore
- H2308 FAG Manicotto adattatore
- H213 FAG Manicotto adattatore
- H312 FAG Manicotto adattatore
- H208 FAG Manicotto adattatore
- H207 FAG Manicotto adattatore
- H216 FAG Manicotto adattatore
- H315 FAG Manicotto adattatore
- H310 FAG Manicotto adattatore
- H2313 FAG Manicotto adattatore
- H2309 FAG Manicotto adattatore
- H317 FAG Manicotto adattatore
- H217 FAG Manicotto adattatore
- H211 FAG Manicotto adattatore
- H2315 FAG Manicotto adattatore
- H316 FAG Manicotto adattatore
- H2311 FAG Manicotto adattatore
- H2319 FAG Manicotto adattatore
- H215 FAG Manicotto adattatore
- H2316 FAG Manicotto adattatore
- H220 FAG Manicotto adattatore
- H218 FAG Manicotto adattatore
- H2318 FAG Manicotto adattatore
- H2322 FAG Manicotto adattatore
- H322 FAG Manicotto adattatore
- H3124 FAG Manicotto adattatore
- H219 FAG Manicotto adattatore
- H320 FAG Manicotto adattatore
- H222 FAG Manicotto adattatore
- H3026 FAG Manicotto adattatore
- H3128 FAG Manicotto adattatore
- H318 FAG Manicotto adattatore
- H3130 FAG Manicotto adattatore
- H3132 FAG Manicotto adattatore
- H2326 FAG Manicotto adattatore
- FR62x7,5 Anello di localizzazione SNR 2x per alloggiamento
- H2330 FAG Manicotto adattatore
- FR62x4 Anello di localizzazione SNR 2x per alloggiamento
- FR62x6 Anello di localizzazione SNR 2x per alloggiamento
- FR62x8 Anello di localizzazione SNR 2x per alloggiamento
- FR52x5 Anello di localizzazione SNR 2x per alloggiamento
- H3032 FAG Manicotto adattatore
- H2332 FAG Manicotto adattatore
- FR80x9 Anello di localizzazione SNR 2x per alloggiamento
- FR80x8 Anello di localizzazione SNR 2x per alloggiamento
- FR72x8,5 Anello di localizzazione SNR 2x per alloggiamento
- FR52x3,5 Anello di localizzazione SNR 2x per alloggiamento
- FR85x3,5 Anello di localizzazione SNR 2x per alloggiamento
- FR85x5,5 Anello di localizzazione SNR 2x per alloggiamento
- FR90x10,5 Anello di localizzazione SNR 2x per alloggiamento
- FR72x5,5 Anello di localizzazione SNR 2x per alloggiamento
- FR80x10,5 Anello di localizzazione SNR 2x per alloggiamento
- FR90x9 Anello di localizzazione SNR 2x per alloggiamento
- FR110x10,5 Anello di localizzazione SNR 2x per alloggiamento
- FR90x4 Anello di localizzazione SNR 2x per alloggiamento
- FR100x11,5 Anello di localizzazione SNR 2x per alloggiamento
- FR110x13 Anello di localizzazione SNR 2x per alloggiamento
- FR100x4 Anello di localizzazione SNR 2x per alloggiamento
- FR120x10 Anello di localizzazione SNR 2x per alloggiamento
- FR140x12,5 Anello di localizzazione SNR 2x per alloggiamento
- FR130x5 Anello di localizzazione SNR 2x per alloggiamento
- FR120x4 Anello di localizzazione SNR 2x per alloggiamento
- FR110x10 Anello di localizzazione SNR 2x per alloggiamento
- FR140x5 Anello di localizzazione SNR 2x per alloggiamento
- FR160x14 Anello di localizzazione SNR 2x per alloggiamento
- FR170x14,5 Anello di localizzazione SNR 2x per alloggiamento
- FR170x5 Anello di localizzazione SNR 2x per alloggiamento
- FR180x5 Anello di localizzazione SNR 2x per alloggiamento
- FR160x17,5 Anello di localizzazione SNR 2x per alloggiamento
- FR180x18 Anello di localizzazione SNR 2x per alloggiamento
- FR215x19,5 Anello di localizzazione SNR 2x per alloggiamento
- FR215x5 Anello di localizzazione SNR 2x per alloggiamento
- DKV072 Copertura FAG
- DKV120 FAG Cover
- DKV130 FAG Cover
- DKV085 Copertura FAG
- DKV150 FAG Cover
- DKV180 FAG Cover
- H2305 SNR Manicotto adattatore
- H205 SNR Manicotto adattatore
- H206 SNR Manicotto adattatore
- H307 SNR Manicotto adattatore
- H2309 Manicotto adattatore SNR
- H2308 Manicotto adattatore SNR
- H212 SNR Manicotto adattatore
- H311 SNR Manicotto adattatore
- H315 SNR Manicotto adattatore
- H312 SNR Manicotto adattatore
- H213 SNR Manicotto adattatore
- H217 SNR Manicotto adattatore
- H313 SNR Manicotto adattatore
- H318 SNR Manicotto adattatore
- H2312 SNR Manicotto adattatore
- H2316 SNR Manicotto adattatore
- H2317 SNR Manicotto adattatore
- H216 SNR Manicotto adattatore
- H2320 SNR Manicotto adattatore
- H218 SNR Manicotto adattatore
- H2318 SNR Manicotto adattatore
- H306 SKF Manicotto adattatore
- H322 SNR Manicotto adattatore
- H3126 Manicotto adattatore SNR
- H222 SNR Manicotto adattatore
- H320 SNR Manicotto adattatore
- H2330 SNR Manicotto adattatore
- H208 SKF Manicotto adattatore
- H2322 SNR Manicotto adattatore
- H207 SKF Manicotto adattatore
- H3128 SNR Manicotto adattatore
- H2328 Manicotto adattatore SNR
- H307E SKF Manicotto adattatore
- H305 SKF Manicotto adattatore
- H306E SKF Manicotto adattatore
- H2326 Manicotto adattatore SNR
- H307 SKF Manicotto adattatore
- H2306 SKF Manicotto adattatore
- H209 SKF Manicotto adattatore
- H2309 SKF Manicotto adattatore
- H210 SKF Manicotto adattatore
- H2332 SNR Manicotto adattatore
- H206 SKF Manicotto adattatore
- H2307 SKF Manicotto adattatore
- H308E SKF Manicotto adattatore
- H309E SKF Manicotto adattatore
- H2308E SKF Manicotto adattatore
- H309 SKF Manicotto adattatore
- H205 SKF Manicotto adattatore
- H308 SKF Manicotto adattatore
- H310 SKF Manicotto adattatore
- H313 SKF Manicotto adattatore
- H211 SKF Manicotto adattatore
- H2311 SKF Manicotto adattatore
- H313E SKF Manicotto adattatore
- H312 SKF Manicotto adattatore
- H212 SKF Manicotto adattatore
- H315 SKF Manicotto adattatore
- H310E SKF Manicotto adattatore
- H2312 SKF Manicotto adattatore
- H213 SKF Manicotto adattatore
- H311 SKF Manicotto adattatore
- H217 SKF Manicotto adattatore
- H2313E SKF Manicotto adattatore
- H316E SKF Manicotto adattatore
- H317 SKF Manicotto adattatore
- H316 SKF Manicotto adattatore
- H216 SKF Manicotto adattatore
- H2315 SKF Manicotto adattatore
- H2317 SKF Manicotto adattatore
- H222 SKF Manicotto adattatore
- H320 SKF Manicotto adattatore
- H318 SKF Manicotto adattatore
- H2322 SKF Manicotto adattatore
- H2318 SKF Manicotto adattatore
- H319 SKF Manicotto adattatore
- H2324 SKF Manicotto adattatore
- H220 SKF Manicotto adattatore
- H2324L SKF Manicotto adattatore
- H322E SKF Manicotto adattatore
- H2320E SKF Manicotto adattatore
- H3124 SKF Manicotto adattatore
- H322 SKF Manicotto adattatore
- H320E SKF Manicotto adattatore
- H2322E SKF Manicotto adattatore
- H3024 SKF Manicotto adattatore
- H3128 SKF Manicotto adattatore
- H2326L SKF Manicotto adattatore
- H3130L SKF Manicotto adattatore
- H3126L SKF Manicotto adattatore
- H2332 SKF Manicotto adattatore
- H2306 FAG Manicotto adattatore
- H307 FAG Manicotto adattatore
- H209 FAG Manicotto adattatore
- H308 FAG Manicotto adattatore
- H212 FAG Manicotto adattatore
- H311 FAG Manicotto adattatore
- H313 FAG Manicotto adattatore
- SC316SV Sigillo SNR
- SC226SV Sigillo SNR
- SC320SV Sigillo SNR
- SC219SV Sigillo SNR
- SC230SV Sigillo SNR
- SC209LA Sigillo SNR
- SC208LA Sigillo SNR
- SC308LA Sigillo SNR
- SC210LA Sigillo SNR
- SC310LA Sigillo SNR
- SC313LA Sigillo SNR
- SC216LA Sigillo SNR
- SC214LA Sigillo SNR
- SC318LA Sigillo SNR
- SC217LA Sigillo SNR
- SC315LA Sigillo SNR
- SC317LA Sigillo SNR
- SC232LA Sigillo SNR
- SC219LA Sigillo SNR
- TSN220L Sigillo SKF
- TSN218L Sigillo SKF
- SC319LA Sigillo SNR
- SC228LA Sigillo SNR
- SC220LA Sigillo SNR
- SC230LA Sigillo SNR
- TSN226L Sigillo SKF
- SC506-605EC Cover SNR
- SC320LA Sigillo SNR
- SC226LA Sigillo SNR
- TSN222L Sigillo SKF
- SC519-616EC Copertina SNR
- SC513-611EC Copertina SNR
- SC507-606EC Cover SNR
- SC511-609EC Cover SNR
- SC318-618EC Copertina SNR
- SC515-612EC Copertina SNR
- SC524-620EC Copertina SNR
- SC518-615EC Copertina SNR
- SC228-528EC Cover SNR
- ASNH506-605 Copertura SKF
- SC517EC Copertina SNR
- SC226-526EC Cover SNR
- SC232-532EC Cover SNR
- ASNH516-613 Copertura SKF
- ASNH513-611 Copertura SKF
- SC230-530EC Cover SNR
- ASNH522-619 Copertura SKF
- ASNH518-615 Copertura SKF
- ASNH511-609 SKF Cover
- ASNH524-620 SKF Copertura
- ASNH526 SKF Cover
- ASNH509 SKF Copertura
- ASNH510-608 Copertura SKF
- ASNH508-607 Copertura SKF
- DKV080 Copertura FAG
- ASNH512-610 Copertura SKF
- ASNH515-612 Copertura SKF
- DKV110 FAG Copertura
- ASNH505 SKF Copertura
- DKV140 FAG Copertura
- ASNH520-617 Copertura SKF
- ASNH530 SKF Copertura
- DKV062 Copertura FAG
- ASNH519-616 Copertura SKF
- DKV090 FAG Cover
- DKV160 FAG Copertura
- DKV100 FAG Cover
- ASNH517 SKF Copertura
- DKV052 Copertura FAG
- ASNH528 SKF Copertura
- ASNH532 SKF Cover
- ASNH507-606 Copertura SKF
- DKV290 FAG Cover
- DKV200 FAG Cover
- DKV170 FAG Cover
- DKV215 Copertura FAG
- H306 SNR Manicotto adattatore
- H2306 SNR Manicotto adattatore
- H207 SNR Manicotto adattatore
- DKV250 FAG Copertura
- H305 SNR Manicotto adattatore
- DKV230 FAG Cover
- H2307 SNR Manicotto adattatore
- H208 SNR Manicotto adattatore
- H310 SNR Manicotto adattatore
- H2311 SNR Manicotto adattatore
- H308 SNR Manicotto adattatore
- DKV270 FAG Cover
- H209 SNR Manicotto adattatore
- H210 SNR Manicotto adattatore
- H309 SNR Manicotto adattatore
- H215 SNR Manicotto adattatore
- H2310 SNR Manicotto adattatore
- H211 SNR Manicotto adattatore
- H2315 SNR Manicotto adattatore
- H317 SNR Manicotto adattatore
- H2313 SNR Manicotto adattatore
- H316 SNR Manicotto adattatore
- H319 SNR Manicotto adattatore
- H220 SNR Manicotto adattatore
- H3124 Manicotto adattatore SNR
- H2324 SNR Manicotto adattatore
- H219 SNR Manicotto adattatore
- H2319 SNR Manicotto adattatore
- H3130 SNR Manicotto adattatore
- H3132 Manicotto adattatore SNR
- SC215FS Sigillo SNR
- SC317FS Sigillo SNR
- SC318FS Sigillo SNR
- SC319FS Sigillo SNR
- SC230FS Sigillo SNR
- TSN208S Sigillo SKF
- TSN205S Sigillo SKF
- TSN310S Sigillo SKF
- TSN212S Sigillo SKF
- TSN312S Sigillo SKF
- TSN207S Sigillo SKF
- TSN213S Sigillo SKF
- TSN213S Sigillo SKF
- TSN313S Sigillo SKF
- TSN215S Sigillo SKF
- TSN315S Sigillo SKF
- TSN314S Sigillo SKF
- TSN316S Sigillo SKF
- TSN313S Sigillo SKF
- TSN216S Sigillo SKF
- TSN316S Sigillo SKF
- TSN215S Sigillo SKF
- TSN317S Sigillo SKF
- TSN319S Sigillo SKF
- TSN217S Sigillo SKF
- TSN317S Sigillo SKF
- TSN220S Sigillo SKF
- TSN222S Sigillo SKF
- TSN319S Sigillo SKF
- SC207SV Sigillo SNR
- TSN228S Sigillo SKF
- TSN222S Sigillo SKF
- TSN220S Sigillo SKF
- TSN217S Sigillo SKF
- TSN218S Sigillo SKF
- TSN320S Sigillo SKF
- SC206SV Sigillo SNR
- SC306SV Sigillo SNR
- SC308SV Sigillo SNR
- TSN226S Sigillo SKF
- SC313SV Sigillo SNR
- SC315SV Sigillo SNR
- SC305SV Sigillo SNR
- SC211SV Sigillo SNR
- SC310SV Sigillo SNR
- SC212SV Sigillo SNR
- SC307SV Sigillo SNR
- SC216SV Sigillo SNR
- SC311SV Sigillo SNR
- SC209SV Sigillo SNR
- SC210SV Sigillo SNR
- SC213SV Sigillo SNR
- SC214SV Sigillo SNR
- SC215SV Sigillo SNR
- SC217SV Sigillo SNR
- SC309SV Sigillo SNR
- SC317SV Sigillo SNR
- SC318SV Sigillo SNR
- SC220SV Sigillo SNR
- SC208SV Sigillo SNR
- SC312SV Sigillo SNR
- SC205LA Sigillo SNR
- SC319SV Sigillo SNR
- SC224SV Sigillo SNR
- SC222SV Sigillo SNR
- SC206LA Sigillo SNR
- SC307LA Sigillo SNR
- SC218SV Sigillo SNR
- SC228SV Sigillo SNR
- SC305LA Sigillo SNR
- SC211LA Sigillo SNR
- SC232SV Sigillo SNR
- SC207LA Sigillo SNR
- SC212LA Sigillo SNR
- SC311LA Sigillo SNR
- SC306LA Sigillo SNR
- SC309LA Sigillo SNR
- SC314LA Sigillo SNR
- SC312LA Sigillo SNR
- SC213LA Sigillo SNR
- SC218LA Sigillo SNR
- SC215LA Sigillo SNR
- SC224LA Sigillo SNR
- SC222LA Sigillo SNR
- SC316LA Sigillo SNR
- TSN224L Sigillo SKF
- SC505EC Copertina SNR
- SC508-607EC Cover SNR
- SC510-608EC Cover SNR
- SC509EC Cover SNR
- SC512-610EC Cover SNR
- SC516-613EC Copertina SNR
- SC520-617EC Copertura SNR
- SC522-619EC Copertina SNR
- SC211DS Sigillo SNR
- SC217DS Sigillo SNR
- SC320DS Sigillo SNR
- SC230DS Sigillo SNR
- SC226DS Sigillo SNR
- SC228DS Sigillo SNR
- TSN306A Sigillo SKF
- TSN208A Sigillo SKF
- TSN209A Sigillo SKF
- TSN310A Sigillo SKF
- TSN313A Sigillo SKF
- TSN314A Sigillo SKF
- TSN211A Sigillo SKF
- TSN317A Sigillo SKF
- TSN216A Sigillo SKF
- TSN226A Sigillo SKF
- TSN213A Sigillo SKF
- DH306 Sigillo FAG
- TSN220A Sigillo SKF
- TSN222A Sigillo SKF
- DH307 Sigillo FAG
- DH208 Sigillo FAG
- TSN230A Sigillo SKF
- DH309 Sigillo FAG
- DH211 Sigillo FAG
- TSN224A Sigillo SKF
- TSN228A Sigillo SKF
- DH209 Sigillo FAG
- DH311 Sigillo FAG
- DH310 Sigillo FAG
- DH210 Sigillo FAG
- DH313 Sigillo FAG
- DH318 Sigillo FAG
- DH214 Sigillo FAG
- DH312 Sigillo FAG
- DH216 Sigillo FAG
- DH220 Sigillo FAG
- DH212 Sigillo FAG
- DH226 Sigillo FAG
- DH317 Sigillo FAG
- DH230 Sigillo FAG
- SC205FS Sigillo SNR
- DH232 Sigillo FAG
- DH219 Sigillo FAG
- DH316 Sigillo FAG
- DH320 Sigillo FAG
- DH228 Sigillo FAG
- SC206FS Sigillo SNR
- DH315 Sigillo FAG
- SC209FS Sigillo SNR
- DH222 Sigillo FAG
- SC211FS Sigillo SNR
- DH319 Sigillo FAG
- SC212FS Sigillo SNR
- SC306FS Sigillo SNR
- DH224 Sigillo FAG
- SC207FS Sigillo SNR
- SC313FS Sigillo SNR
- SC213FS Sigillo SNR
- SC309FS Sigillo SNR
- SC311FS Sigillo SNR
- SC305FS Sigillo SNR
- SC307FS Sigillo SNR
- SC218FS Sigillo SNR
- SC210FS Sigillo SNR
- SC314FS Sigillo SNR
- SC310FS Sigillo SNR
- SC308FS Sigillo SNR
- SC219FS Sigillo SNR
- SC312FS Sigillo SNR
- SC315FS Sigillo SNR
- SC320FS Sigillo SNR
- SC316FS Sigillo SNR
- SC216FS Sigillo SNR
- TSN205S Sigillo SKF
- SC224FS Sigillo SNR
- TSN305S Sigillo SKF
- SC220FS Sigillo SNR
- TSN308S Sigillo SKF
- TSN308S Sigillo SKF
- SC222FS Sigillo SNR
- SC228FS Sigillo SNR
- TSN209S Sigillo SKF
- SC232FS Sigillo SNR
- TSN309S Sigillo SKF
- TSN210S Sigillo SKF
- TSN211S Sigillo SKF
- TSN209S Sigillo SKF
- TSN210S Sigillo SKF
- TSN310S Sigillo SKF
- TSN314S Sigillo SKF
- TSN211S Sigillo SKF
- TSN311S Sigillo SKF
- TSN216S Sigillo SKF
- TSN315S Sigillo SKF
- TSN218S Sigillo SKF
- TSN320S Sigillo SKF
- TSN224S Sigillo SKF
- TSN226S Sigillo SKF
- TSN224S Sigillo SKF
- TSN616S Sigillo SKF
- TSN619S Sigillo SKF
- SC507LA Sigillo SNR
- SC608LA Sigillo SNR
- SC610LA Sigillo SNR
- SC515LA Sigillo SNR
- SC516LA Sigillo SNR
- SC518LA Sigillo SNR
- SC512TA Sigillo SNR
- SC508TA Sigillo SNR
- SC524LA Sigillo SNR
- SC532LA Sigillo SNR
- SC526LA Sigillo SNR
- SC507TA Sigillo SNR
- SC526TA Sigillo SNR
- SC524TA Sigillo SNR
- SC528TA Sigillo SNR
- SC513TA Sigillo SNR
- TSN508L Sigillo SKF
- SC518TA Sigillo SNR
- SC522TA Sigillo SNR
- SC517TA Sigillo SNR
- TSN612L Sigillo SKF
- SC520TA Sigillo SNR
- TSN507L Sigillo SKF
- SC532TA Sigillo SNR
- TSN511L Sigillo SKF
- TSN513L Sigillo SKF
- TSN509L Sigillo SKF
- TSN609L Sigillo SKF
- TSN615L Sigillo SKF
- TSN520L Sigillo SKF
- TSN524L Sigillo SKF
- TSN517L Sigillo SKF
- TSN611L Sigillo SKF
- TSN610L Sigillo SKF
- TSN530L Sigillo SKF
- TSN532L Sigillo SKF
- TSN519L Sigillo SKF
- TSN515L Sigillo SKF
- TSN522L Sigillo SKF
- TSN518L Sigillo SKF
- SC307DS Sigillo SNR
- TSN528L Sigillo SKF
- SC305DS Sigillo SNR
- TSN613L Sigillo SKF
- SC309DS Sigillo SNR
- SC205DS Sigillo SNR
- TSN616L Sigillo SKF
- SC206DS Sigillo SNR
- TSN526L Sigillo SKF
- SC311DS Sigillo SNR
- SC308DS Sigillo SNR
- SC209DS Sigillo SNR
- SC215DS Sigillo SNR
- SC207DS Sigillo SNR
- SC216DS Sigillo SNR
- SC212DS Sigillo SNR
- SC208DS Sigillo SNR
- SC312DS Sigillo SNR
- SC213DS Sigillo SNR
- SC313DS Sigillo SNR
- SC316DS Sigillo SNR
- SC218DS Sigillo SNR
- SC315DS Sigillo SNR
- SC210DS Sigillo SNR
- SC310DS Sigillo SNR
- SC318DS Sigillo SNR
- SC314DS Sigillo SNR
- SC319DS Sigillo SNR
- SC306DS Sigillo SNR
- SC222DS Sigillo SNR
- SC317DS Sigillo SNR
- SC214DS Sigillo SNR
- SC220DS Sigillo SNR
- SC232DS Sigillo SNR
- TSN307A Sigillo SKF
- SC224DS Sigillo SNR
- SC219DS Sigillo SNR
- TSN308A Sigillo SKF
- TSN206A Sigillo SKF
- TSN312A Sigillo SKF
- TSN311A Sigillo SKF
- TSN207A Sigillo SKF
- TSN210A Sigillo SKF
- TSN315A Sigillo SKF
- TSN212A Sigillo SKF
- TSN309A Sigillo SKF
- TSN217A Sigillo SKF
- TSN319A Sigillo SKF
- TSN218A Sigillo SKF
- TSN215A Sigillo SKF
- TSN320A Sigillo SKF
- TSN316A Sigillo SKF
- TSN232A Sigillo SKF
- DH207 Sigillo FAG
- DH308 Sigillo FAG
- DH215 Sigillo FAG
- DH217 Sigillo FAG
- DH214 Sigillo FAG
- DH218 Sigillo FAG
- DH318 Sigillo FAG
- TSN606C Sigillo SKF
- TSN507C Sigillo SKF
- TSN608C Sigillo SKF
- TSN515C Sigillo SKF
- TSN612C Sigillo SKF
- TSN517C Sigillo SKF
- TSN528C Sigillo SKF
- TSN619C Sigillo SKF
- SC606SV Sigillo SNR
- SC605SV Sigillo SNR
- SC608SV Sigillo SNR
- SC513SV Sigillo SNR
- SC512SV Sigillo SNR
- SC611SV Sigillo SNR
- SC613SV Sigillo SNR
- SC519SV Sigillo SNR
- SC526SV Sigillo SNR
- TSN508S Sigillo SKF
- SC616SV Sigillo SNR
- SC524SV Sigillo SNR
- TSN609S Sigillo SKF
- TSN505S Sigillo SKF
- SC518SV Sigillo SNR
- SC517SV Sigillo SNR
- SC528SV Sigillo SNR
- SC522SV Sigillo SNR
- TSN507S Sigillo SKF
- TSN610S Sigillo SKF
- TSN509S Sigillo SKF
- TSN506S Sigillo SKF
- TSN613S Sigillo SKF
- TSN519S Sigillo SKF
- TSN608S Sigillo SKF
- TSN518S Sigillo SKF
- TSN520S Sigillo SKF
- TSN510S Sigillo SKF
- TSN522S Sigillo SKF
- TSN513S Sigillo SKF
- TSN512S Sigillo SKF
- TSN511S Sigillo SKF
- TSN612S Sigillo SKF
- TSN516S Sigillo SKF
- TSN515S Sigillo SKF
- TSN615S Sigillo SKF
- TSN517S Sigillo SKF
- TSN524S Sigillo SKF
- TSN617S Sigillo SKF
- TSN530S Sigillo SKF
- SC607LA Sigillo SNR
- SC508LA Sigillo SNR
- TSN528S Sigillo SKF
- SC606LA Sigillo SNR
- SC605LA Sigillo SNR
- SC505LA Sigillo SNR
- SC506LA Sigillo SNR
- TSN620S Sigillo SKF
- SC510LA Sigillo SNR
- TSN526S Sigillo SKF
- TSN532S Sigillo SKF
- SC613LA Sigillo SNR
- SC509LA Sigillo SNR
- SC612LA Sigillo SNR
- SC615LA Sigillo SNR
- SC616LA Sigillo SNR
- SC609LA Sigillo SNR
- SC511LA Sigillo SNR
- SC512LA Sigillo SNR
- SC517LA Sigillo SNR
- SC611LA Sigillo SNR
- SC618LA Sigillo SNR
- SC519LA Sigillo SNR
- SC617LA Sigillo SNR
- SC522LA Sigillo SNR
- SC513LA Sigillo SNR
- SC620LA Sigillo SNR
- SC619LA Sigillo SNR
- SC530LA Sigillo SNR
- SC505TA Sigillo SNR
- SC520LA Sigillo SNR
- SC528LA Sigillo SNR
- SC509TA Sigillo SNR
- SC515TA Sigillo SNR
- SC506TA Sigillo SNR
- SC510TA Sigillo SNR
- SC516TA Sigillo SNR
- SC519TA Sigillo SNR
- SC511TA Sigillo SNR
- SC530TA Sigillo SNR
- TSN510L Sigillo SKF
- TSN512L Sigillo SKF
- TSN617L Sigillo SKF
- TSN516L Sigillo SKF
- TSN507A Sigillo SKF
- TSN608A Sigillo SKF
- TSN510A Sigillo SKF
- TSN611A Sigillo SKF
- TSN613A Sigillo SKF
- TSN517A Sigillo SKF
- TSN616A Sigillo SKF
- TSN518A Sigillo SKF
- DH506 Sigillo FAG
- TSN524A Sigillo SKF
- TSN528A Sigillo SKF
- DH611 Sigillo FAG
- DH511 Sigillo FAG
- DH608 Sigillo FAG
- DH518 Sigillo FAG
- DH512 Sigillo FAG
- DH513 Sigillo FAG
- DH612 Sigillo FAG
- DH615 Sigillo FAG
- DH520 Sigillo FAG
- SC608FS Sigillo SNR
- DH528 Sigillo FAG
- DH617 Sigillo FAG
- DH519 Sigillo FAG
- SC605FS Sigillo SNR
- DH530 Sigillo FAG
- DH524 Sigillo FAG
- DH522 Sigillo FAG
- DH526 Sigillo FAG
- SC515FS Sigillo SNR
- SC615FS Sigillo SNR
- DH532 Sigillo FAG
- SC516FS Sigillo SNR
- SC517FS Sigillo SNR
- SC511FS Sigillo SNR
- SC606FS Sigillo SNR
- SC617FS Sigillo SNR
- SC611FS Sigillo SNR
- SC508FS Sigillo SNR
- SC510FS Sigillo SNR
- SC609FS Sigillo SNR
- SC520FS Sigillo SNR
- SC607FS Sigillo SNR
- SC610FS Sigillo SNR
- SC616FS Sigillo SNR
- TSN605C Sigillo SKF
- SC512FS Sigillo SNR
- SC513FS Sigillo SNR
- SC613FS Sigillo SNR
- SC612FS Sigillo SNR
- SC619FS Sigillo SNR
- TSN609C Sigillo SKF
- SC530FS Sigillo SNR
- SC519FS Sigillo SNR
- TSN610C Sigillo SKF
- TSN506C Sigillo SKF
- SC524FS Sigillo SNR
- SC618FS Sigillo SNR
- TSN508C Sigillo SKF
- TSN512C Sigillo SKF
- TSN505C Sigillo SKF
- TSN611C Sigillo SKF
- TSN509C Sigillo SKF
- SC522FS Sigillo SNR
- TSN615C Sigillo SKF
- SC532FS Sigillo SNR
- TSN510C Sigillo SKF
- TSN511C Sigillo SKF
- TSN617C Sigillo SKF
- TSN519C Sigillo SKF
- TSN513C Sigillo SKF
- TSN520C Sigillo SKF
- TSN613C Sigillo SKF
- TSN516C Sigillo SKF
- TSN524C Sigillo SKF
- TSN522C Sigillo SKF
- TSN526C Sigillo SKF
- TSN616C Sigillo SKF
- TSN620C Sigillo SKF
- TSN530C Sigillo SKF
- SC505SV Sigillo SNR
- TSN532C Sigillo SKF
- TSN518C Sigillo SKF
- SC507SV Sigillo SNR
- SC508SV Sigillo SNR
- SC509SV Sigillo SNR
- SC510SV Sigillo SNR
- SC511SV Sigillo SNR
- SC506SV Sigillo SNR
- SC607SV Sigillo SNR
- SC612SV Sigillo SNR
- SC610SV Sigillo SNR
- SC609SV Sigillo SNR
- SC515SV Sigillo SNR
- SC516SV Sigillo SNR
- SC615SV Sigillo SNR
- SC618SV Sigillo SNR
- SC619SV Sigillo SNR
- SC617SV Sigillo SNR
- SC520SV Sigillo SNR
- SC620SV Sigillo SNR
- SC530SV Sigillo SNR
- SC532SV Sigillo SNR
- TSN611S Sigillo SKF
- SNV190-F-L Alloggiamento FAG
- SNV250-F-L Alloggiamento FAG
- SNV140-F-L Alloggiamento FAG
- SNC205 SNR Alloggiamento
- SNV340-F-L Alloggiamento FAG
- SNC206-305 Alloggiamento SNR
- SNC207-306 Alloggiamento SNR
- SNC208-307 Alloggiamento SNR
- SNC210-308 Alloggiamento SNR
- SNC216-313 Alloggiamento SNR
- SNC211-309 Alloggiamento SNR
- SNC214 SNR Alloggiamento
- SNC217-314 Alloggiamento SNR
- SNC218-315 Alloggiamento SNR
- SNC224-320 Alloggiamento SNR
- SNL 510-608 SKF Alloggiamento
- SNL 207 SKF Alloggiamento
- SNL 212 SKF Alloggiamento
- SNL 211 SKF Alloggiamento
- SNL 209 SKF Alloggiamento
- SNL 518-615 SKF Alloggiamento
- SNL 511-609 SKF Alloggiamento
- SNL 516-613 SKF Alloggiamento
- SNL 215 SKF Alloggiamento
- SNL 526 SKF Alloggiamento
- SNL 519-616 SKF Alloggiamento
- SNL 532 SKF Alloggiamento
- SNL 217 SKF Alloggiamento
- SNL 213 SKF Alloggiamento
- SNL 218 SKF Alloggiamento
- SNL 216 SKF Alloggiamento
- SC609DS Sigillo SNR
- SNL 522-619 SKF Alloggiamento
- SNL 524-620 SKF Alloggiamento
- SC605DS Sigillo SNR
- SC606DS Sigillo SNR
- SC610DS Sigillo SNR
- SC608DS Sigillo SNR
- SC607DS Sigillo SNR
- SC516DS Sigillo SNR
- SC511DS Sigillo SNR
- SC618DS Sigillo SNR
- SC612DS Sigillo SNR
- SC617DS Sigillo SNR
- SC613DS Sigillo SNR
- SC520DS Sigillo SNR
- SC510DS Sigillo SNR
- SC611DS Sigillo SNR
- SC513DS Sigillo SNR
- SC519DS Sigillo SNR
- SC512DS Sigillo SNR
- SC524DS Sigillo SNR
- SC615DS Sigillo SNR
- SC616DS Sigillo SNR
- TSN508A Sigillo SKF
- TSN505A Sigillo SKF
- SC518DS Sigillo SNR
- SC517DS Sigillo SNR
- SC530DS Sigillo SNR
- SC522DS Sigillo SNR
- SC528DS Sigillo SNR
- TSN506A Sigillo SKF
- SC620DS Sigillo SNR
- SC532DS Sigillo SNR
- TSN612A Sigillo SKF
- TSN513A Sigillo SKF
- TSN509A Sigillo SKF
- SC619DS Sigillo SNR
- SC526DS Sigillo SNR
- TSN610A Sigillo SKF
- TSN605A Sigillo SKF
- TSN609A Sigillo SKF
- TSN511A Sigillo SKF
- TSN512A Sigillo SKF
- TSN606A Sigillo SKF
- TSN619A Sigillo SKF
- TSN615A Sigillo SKF
- TSN516A Sigillo SKF
- TSN522A Sigillo SKF
- TSN515A Sigillo SKF
- TSN520A Sigillo SKF
- TSN519A Sigillo SKF
- TSN526A Sigillo SKF
- TSN617A Sigillo SKF
- DH605 Sigillo FAG
- TSN532A Sigillo SKF
- DH508 Sigillo FAG
- TSN530A Sigillo SKF
- DH505 Sigillo FAG
- DH510 Sigillo FAG
- TSN620A Sigillo SKF
- DH609 Sigillo FAG
- DH606 Sigillo FAG
- DH509 Sigillo FAG
- DH507 Sigillo FAG
- DH607 Sigillo FAG
- DH515 Sigillo FAG
- DH613 Sigillo FAG
- DH516 Sigillo FAG
- DH610 Sigillo FAG
- DH517 Sigillo FAG
- DH616 Sigillo FAG
- DH619 Sigillo FAG
- DH620 Sigillo FAG
- SC506FS Sigillo SNR
- SC507FS Sigillo SNR
- SC509FS Sigillo SNR
- SNV200+21319 Foro cilindrico a blocco diviso - SNV200+21319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21319 with a cylindrical inner ring lying directly on the shaft.
- SNV200+6222 Foro cilindrico a blocco diviso - SNV200+6222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6222 with a cylindrical inner ring lying directly on the shaft.
- SNV200+1222 Foro cilindrico a blocco diviso - SNV200+1222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1222 with a cylindrical inner ring lying directly on the shaft.
- SNV200+222 Foro cilindrico a blocco diviso - SNV200+22222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22222 with a cylindrical inner ring lying directly on the shaft.
- SNV215+20320 Foro cilindrico a blocco diviso - SNV215+20320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20320 with a cylindrical inner ring lying directly on the shaft.
- SNV215+22320 Foro cilindrico a blocco diviso - SNV215+22320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22320 with a cylindrical inner ring lying directly on the shaft.
- SNV215+21320 Foro cilindrico a blocco diviso - SNV215+21320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21320 with a cylindrical inner ring lying directly on the shaft.
- SNV215+20224 Foro cilindrico a blocco diviso - SNV215+20224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20224 with a cylindrical inner ring lying directly on the shaft.
- SNV215+22224 Foro cilindrico a blocco diviso - SNV215+22224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22224 with a cylindrical inner ring lying directly on the shaft.
- SNV230+20226 Foro cilindrico a blocco diviso - SNV230+20226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20226 with a cylindrical inner ring lying directly on the shaft.
- SNV240+6322 Foro cilindrico a blocco diviso - SNV240+6322 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6322 with a cylindrical inner ring lying directly on the shaft.
- SNV230+226 Foro cilindrico a blocco diviso - SNV230+22226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22226 with a cylindrical inner ring lying directly on the shaft.
- SNV230+23226 Foro cilindrico a blocco diviso - SNV230+23226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23226 with a cylindrical inner ring lying directly on the shaft.
- SNV215+6224 Foro cilindrico a blocco diviso - SNV215+6224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6224 with a cylindrical inner ring lying directly on the shaft.
- SNV250+23228 Foro cilindrico a blocco diviso - SNV250+23228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23228 with a cylindrical inner ring lying directly on the shaft.
- SNV260+6324 Foro cilindrico a blocco diviso - SNV260+6324 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6324 with a cylindrical inner ring lying directly on the shaft.
- SNV260+20324 Foro cilindrico a blocco diviso - SNV260+20324 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20324 with a cylindrical inner ring lying directly on the shaft.
- SNV290+20232 Foro cilindrico a blocco diviso - SNV290+20232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20232 with a cylindrical inner ring lying directly on the shaft.
- SNC507-606 Alloggiamento SNR
- SNV270+22230 Foro cilindrico a blocco diviso - SNV270+22230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22230 with a cylindrical inner ring lying directly on the shaft.
- SNC508-607 Alloggiamento SNR
- SNC512-610 Alloggiamento SNR
- SNV290+232 Foro cilindrico a blocco diviso - SNV290+23232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23232 with a cylindrical inner ring lying directly on the shaft.
- SNC520-617 Alloggiamento SNR
- SNC519-616 Alloggiamento SNR
- SNC515-612 Alloggiamento SNR
- SNC318-618 Alloggiamento SNR
- SNL510-608 SKF Alloggiamento
- SNC516-613 Alloggiamento SNR
- SNC226-526 Alloggiamento SNR
- SNC511-609 Alloggiamento SNR
- SNC517 SNR Alloggiamento
- SNC518-615 Alloggiamento SNR
- SNL511-609 SKF Alloggiamento
- SNL509 SKF Alloggiamento
- SNL507-606 Alloggiamento SKF
- SNC232-532 Alloggiamento SNR
- SNL513-611 Alloggiamento SKF
- SNL515-612 SKF Alloggiamento
- SNL526 SKF Alloggiamento
- SNL517 SKF Alloggiamento
- SNL505 SKF Alloggiamento
- SNL524-620 SKF Alloggiamento
- SNL508-607 Alloggiamento SKF
- SNL512-610 SKF Alloggiamento
- SNL516-613 SKF Alloggiamento
- SNL518-615 SKF Alloggiamento
- SNV100-F-L Alloggiamento FAG
- SNL522-619 SKF Alloggiamento
- SNL528 SKF Alloggiamento
- SNV080-F-L Alloggiamento FAG
- SNL530 SKF Alloggiamento
- SNL532 SKF Alloggiamento
- SNV085-F-L Alloggiamento FAG
- SNV052-F-L Alloggiamento FAG
- SNV090-F-L Alloggiamento FAG
- SNV062-F-L Alloggiamento FAG
- SNV072-F-L Alloggiamento FAG
- SNV120-F-L Alloggiamento FAG
- SNV130-F-L Alloggiamento FAG
- SNV170-F-L Alloggiamento FAG
- SNV110-F-L Alloggiamento FAG
- SNV270-F-L Alloggiamento FAG
- SNV160-F-L Alloggiamento FAG
- SNV150-F-L Alloggiamento FAG
- SNV180-F-L Alloggiamento FAG
- SNV215-F-L Alloggiamento FAG
- SNV200-F-L Alloggiamento FAG
- SNV230-F-L Alloggiamento FAG
- SNV300-F-L Alloggiamento FAG
- SNV260-F-L Alloggiamento FAG
- SNV240-F-L Alloggiamento FAG
- SNV280-F-L Alloggiamento FAG
- SNV290-F-L Alloggiamento FAG
- SNC215-312 Alloggiamento SNR
- SNV320-F-L Alloggiamento FAG
- SNC220-317 Alloggiamento SNR
- SNC222-319 Alloggiamento SNR
- SNC212-310 Alloggiamento SNR
- SNC213-311 Alloggiamento SNR
- SNL205 SKF Alloggiamento
- SNC209 SNR Alloggiamento
- SNC224-320 Alloggiamento SNR
- SNL 506-605 SKF Alloggiamento
- SNL 509 SKF Alloggiamento
- SNC219-316 Alloggiamento SNR
- SNL 507-606 SKF Alloggiamento
- SNL 512-610 SKF Alloggiamento
- SNL 513-611 Alloggiamento SKF
- SNL 206-305 SKF Alloggiamento
- SNL 515-612 SKF Alloggiamento
- SNL 517 SKF Alloggiamento
- SNL 520-617 SKF Alloggiamento
- SNL 530 SKF Alloggiamento
- SC505DS Sigillo SNR
- SNV125-F-L Alloggiamento FAG
- SC506DS Sigillo SNR
- SNL 528 SKF Alloggiamento
- SC507DS Sigillo SNR
- SC508DS Sigillo SNR
- SC509DS Sigillo SNR
- SC515DS Sigillo SNR
- SNV100+22211 Foro cilindrico a blocco diviso - SNV100+22211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22211 with a cylindrical inner ring lying directly on the shaft.
- SNV110+20310 Foro cilindrico a blocco diviso - SNV110+20310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20310 with a cylindrical inner ring lying directly on the shaft.
- SNV110+2310 Foro cilindrico a blocco diviso - SNV110+2310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2310 with a cylindrical inner ring lying directly on the shaft.
- SNV110+1212 Foro cilindrico a blocco diviso - SNV110+1212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1212 with a cylindrical inner ring lying directly on the shaft.
- SNV120+6213 Foro cilindrico a blocco diviso - SNV120+6213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6213 with a cylindrical inner ring lying directly on the shaft.
- SNV120+2213 Foro cilindrico a blocco diviso - SNV120+2213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2213 with a cylindrical inner ring lying directly on the shaft.
- SNV120+22311 Foro cilindrico a blocco diviso - SNV120+22311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22311 with a cylindrical inner ring lying directly on the shaft.
- SNV120+20213 Foro cilindrico a blocco diviso - SNV120+20213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20213 with a cylindrical inner ring lying directly on the shaft.
- SNV125+20214 Foro cilindrico a blocco diviso - SNV125+20214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20214 with a cylindrical inner ring lying directly on the shaft.
- SNV120+22213 Foro cilindrico a blocco diviso - SNV120+22213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22213 with a cylindrical inner ring lying directly on the shaft.
- SNV130+21312 Foro cilindrico a blocco diviso - SNV130+21312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21312 with a cylindrical inner ring lying directly on the shaft.
- SNV125+6214 Foro cilindrico a blocco diviso - SNV125+6214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6214 with a cylindrical inner ring lying directly on the shaft.
- SNV130+6312 Foro cilindrico a blocco diviso - SNV130+6312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6312 with a cylindrical inner ring lying directly on the shaft.
- SNV130+2312 Foro cilindrico a blocco diviso - SNV130+2312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2312 with a cylindrical inner ring lying directly on the shaft.
- SNV120+2311 Foro cilindrico a blocco diviso - SNV120+2311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2311 with a cylindrical inner ring lying directly on the shaft.
- SNV130+20312 Foro cilindrico a blocco diviso - SNV130+20312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20312 with a cylindrical inner ring lying directly on the shaft.
- SNV130+20215 Foro cilindrico a blocco diviso - SNV130+20215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20215 with a cylindrical inner ring lying directly on the shaft.
- SNV140+1216 Foro cilindrico a blocco diviso - SNV140+1216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1216 with a cylindrical inner ring lying directly on the shaft.
- SNV140+2313 Foro cilindrico a blocco diviso - SNV140+2313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2313 with a cylindrical inner ring lying directly on the shaft.
- SNV140+213 Foro cilindrico a blocco diviso - SNV140+21313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21313 with a cylindrical inner ring lying directly on the shaft.
- SNV150+20314 Foro cilindrico a blocco diviso - SNV150+20314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20314 with a cylindrical inner ring lying directly on the shaft.
- SNV150+1217 Foro cilindrico a blocco diviso - SNV150+1217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1217 with a cylindrical inner ring lying directly on the shaft.
- SNV140+6216 Foro cilindrico a blocco diviso - SNV140+6216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6216 with a cylindrical inner ring lying directly on the shaft.
- SNV150+22314 Foro cilindrico a blocco diviso - SNV150+22314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22314 with a cylindrical inner ring lying directly on the shaft.
- SNV140+22216 Foro cilindrico a blocco diviso - SNV140+22216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22216 with a cylindrical inner ring lying directly on the shaft.
- SNV160+6315 Foro cilindrico a blocco diviso - SNV160+6315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6315 with a cylindrical inner ring lying directly on the shaft.
- SNV150+21314 Foro cilindrico a blocco diviso - SNV150+21314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21314 with a cylindrical inner ring lying directly on the shaft.
- SNV150+2314 Foro cilindrico a blocco diviso - SNV150+2314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2314 with a cylindrical inner ring lying directly on the shaft.
- SNV150+2217 Foro cilindrico a blocco diviso - SNV150+2217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2217 with a cylindrical inner ring lying directly on the shaft.
- SNV150+20217 Foro cilindrico a blocco diviso - SNV150+20217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20217 with a cylindrical inner ring lying directly on the shaft.
- SNV160+6218 Foro cilindrico a blocco diviso - SNV160+6218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6218 with a cylindrical inner ring lying directly on the shaft.
- SNV170+2316 Foro cilindrico a blocco diviso - SNV170+2316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2316 with a cylindrical inner ring lying directly on the shaft.
- SNV150+6217 Foro cilindrico a blocco diviso - SNV150+6217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6217 with a cylindrical inner ring lying directly on the shaft.
- SNV160+20315 Foro cilindrico a blocco diviso - SNV160+20315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20315 with a cylindrical inner ring lying directly on the shaft.
- SNV160+1315 Foro cilindrico a blocco diviso - SNV160+1315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1315 with a cylindrical inner ring lying directly on the shaft.
- SNV150+22217 Foro cilindrico a blocco diviso - SNV150+22217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22217 with a cylindrical inner ring lying directly on the shaft.
- SNV160+2218 Foro cilindrico a blocco diviso - SNV160+2218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2218 with a cylindrical inner ring lying directly on the shaft.
- SNV160+1218 Foro cilindrico a blocco diviso - SNV160+1218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1218 with a cylindrical inner ring lying directly on the shaft.
- SNV170+20316 Foro cilindrico a blocco diviso - SNV170+20316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20316 with a cylindrical inner ring lying directly on the shaft.
- SNV160+21315 Foro cilindrico a blocco diviso - SNV160+21315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21315 with a cylindrical inner ring lying directly on the shaft.
- SNV180+6317 Foro cilindrico a blocco diviso - SNV180+6317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6317 with a cylindrical inner ring lying directly on the shaft.
- SNV170+21316 Foro cilindrico a blocco diviso - SNV170+21316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21316 with a cylindrical inner ring lying directly on the shaft.
- SNV160+20218 Foro cilindrico a blocco diviso - SNV160+20218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20218 with a cylindrical inner ring lying directly on the shaft.
- SNV170+1316 Foro cilindrico a blocco diviso - SNV170+1316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1316 with a cylindrical inner ring lying directly on the shaft.
- SNV180+21317 Foro cilindrico a blocco diviso - SNV180+21317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21317 with a cylindrical inner ring lying directly on the shaft.
- SNV170+2219 Foro cilindrico a blocco diviso - SNV170+2219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2219 with a cylindrical inner ring lying directly on the shaft.
- SNV180+2317 Foro cilindrico a blocco diviso - SNV180+2317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2317 with a cylindrical inner ring lying directly on the shaft.
- SNV170+22316 Foro cilindrico a blocco diviso - SNV170+22316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22316 with a cylindrical inner ring lying directly on the shaft.
- SNV180+22317 Foro cilindrico a blocco diviso - SNV180+22317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22317 with a cylindrical inner ring lying directly on the shaft.
- SNV170+6316 Foro cilindrico a blocco diviso - SNV170+6316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6316 with a cylindrical inner ring lying directly on the shaft.
- SNV160+23218 Foro cilindrico a blocco diviso - SNV160+23218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23218 with a cylindrical inner ring lying directly on the shaft.
- SNV180+20317 Foro cilindrico a blocco diviso - SNV180+20317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20317 with a cylindrical inner ring lying directly on the shaft.
- SNV180+1317 Foro cilindrico a blocco diviso - SNV180+1317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1317 with a cylindrical inner ring lying directly on the shaft.
- SNV170+20219 Foro cilindrico a blocco diviso - SNV170+20219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20219 with a cylindrical inner ring lying directly on the shaft.
- SNV180+2220 Foro cilindrico a blocco diviso - SNV180+2220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2220 with a cylindrical inner ring lying directly on the shaft.
- SNV200+1319 Foro cilindrico a blocco diviso - SNV200+1319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1319 with a cylindrical inner ring lying directly on the shaft.
- SNV180+22220 Foro cilindrico a blocco diviso - SNV180+22220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22220 with a cylindrical inner ring lying directly on the shaft.
- SNV180+23220 Foro cilindrico a blocco diviso - SNV180+23220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23220 with a cylindrical inner ring lying directly on the shaft.
- SNV180+6220 Foro cilindrico a blocco diviso - SNV180+6220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6220 with a cylindrical inner ring lying directly on the shaft.
- SNV190+6318 Foro cilindrico a blocco diviso - SNV190+6318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6318 with a cylindrical inner ring lying directly on the shaft.
- SNV190+1318 Foro cilindrico a blocco diviso - SNV190+1318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1318 with a cylindrical inner ring lying directly on the shaft.
- SNV170+22219 Foro cilindrico a blocco diviso - SNV170+22219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22219 with a cylindrical inner ring lying directly on the shaft.
- SNV190+20318 Foro cilindrico a blocco diviso - SNV190+20318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20318 with a cylindrical inner ring lying directly on the shaft.
- SNV190+22318 Foro cilindrico a blocco diviso - SNV190+22318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22318 with a cylindrical inner ring lying directly on the shaft.
- SNV190+2318 Foro cilindrico a blocco diviso - SNV190+2318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2318 with a cylindrical inner ring lying directly on the shaft.
- SNV180+1220 Foro cilindrico a blocco diviso - SNV180+1220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1220 with a cylindrical inner ring lying directly on the shaft.
- SNV180+20220 Foro cilindrico a blocco diviso - SNV180+20220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20220 with a cylindrical inner ring lying directly on the shaft.
- SNV190+21318 Foro cilindrico a blocco diviso - SNV190+21318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21318 with a cylindrical inner ring lying directly on the shaft.
- SNV200+6319 Foro cilindrico a blocco diviso - SNV200+6319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6319 with a cylindrical inner ring lying directly on the shaft.
- SNV200+20319 Foro cilindrico a blocco diviso - SNV200+20319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20319 with a cylindrical inner ring lying directly on the shaft.
- SNV200+23222 Foro cilindrico a blocco diviso - SNV200+23222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23222 with a cylindrical inner ring lying directly on the shaft.
- SNV200+22319 Foro cilindrico a blocco diviso - SNV200+22319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22319 with a cylindrical inner ring lying directly on the shaft.
- SNV215+2320 Foro cilindrico a blocco diviso - SNV215+2320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2320 with a cylindrical inner ring lying directly on the shaft.
- SNV200+20222 Foro cilindrico a blocco diviso - SNV200+20222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20222 with a cylindrical inner ring lying directly on the shaft.
- SNV215+1320 Foro cilindrico a blocco diviso - SNV215+1320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1320 with a cylindrical inner ring lying directly on the shaft.
- SNV200+2319 Foro cilindrico a blocco diviso - SNV200+2319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2319 with a cylindrical inner ring lying directly on the shaft.
- SNV215+6320 Foro cilindrico a blocco diviso - SNV215+6320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6320 with a cylindrical inner ring lying directly on the shaft.
- SNV215+23224 Foro cilindrico a blocco diviso - SNV215+23224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23224 with a cylindrical inner ring lying directly on the shaft.
- SNV250+22228 Foro cilindrico a blocco diviso - SNV250+22228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22228 with a cylindrical inner ring lying directly on the shaft.
- SNV230+6226 Foro cilindrico a blocco diviso - SNV230+6226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6226 with a cylindrical inner ring lying directly on the shaft.
- SNV250+6228 Foro cilindrico a blocco diviso - SNV250+6228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6228 with a cylindrical inner ring lying directly on the shaft.
- SNV240+20322 Foro cilindrico a blocco diviso - SNV240+20322 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20322 with a cylindrical inner ring lying directly on the shaft.
- SNV240+21322 Foro cilindrico a blocco diviso - SNV240+21322 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21322 with a cylindrical inner ring lying directly on the shaft.
- SNV240+22322 Foro cilindrico a blocco diviso - SNV240+22322 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22322 with a cylindrical inner ring lying directly on the shaft.
- SNV270+23230 Foro cilindrico a blocco diviso - SNV270+23230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 23230 with a cylindrical inner ring lying directly on the shaft.
- SNV250+20228 Foro cilindrico a blocco diviso - SNV250+20228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20228 with a cylindrical inner ring lying directly on the shaft.
- SNV260+22324 Foro cilindrico a blocco diviso - SNV260+22324 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22324 with a cylindrical inner ring lying directly on the shaft.
- SNC505 SNR Alloggiamento
- SNC510-608 Alloggiamento SNR
- SNV270+20230 Foro cilindrico a blocco diviso - SNV270+20230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20230 with a cylindrical inner ring lying directly on the shaft.
- SNV270+6230 Foro cilindrico a blocco diviso - SNV270+6230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6230 with a cylindrical inner ring lying directly on the shaft.
- SNV290+6232 Foro cilindrico a blocco diviso - SNV290+6232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6232 with a cylindrical inner ring lying directly on the shaft.
- SNV290+22232 Foro cilindrico a blocco diviso - SNV290+22232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22232 with a cylindrical inner ring lying directly on the shaft.
- SNC513-611 Alloggiamento SNR
- SNC509 SNR Alloggiamento
- SNC506-605 Alloggiamento SNR
- SNC522-619 Alloggiamento SNR
- SNC524-620 Alloggiamento SNR
- SNC230-530 Alloggiamento SNR
- SNC228-528 Alloggiamento SNR
- SNL506-605 SKF Alloggiamento
- SNL519-616 SKF Alloggiamento
- SNL520-617 SKF Alloggiamento
- SNL216+C 2216 Foro cilindrico a blocco diviso - SNL216+C 2216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2216 with a cylindrical inner ring lying directly on the shaft.
- SNL316+21316 E Foro cilindrico a blocco diviso - SNL316+21316 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21316 E with a cylindrical inner ring lying directly on the shaft.
- SNL316+C 2316 Foro cilindrico a blocco diviso - SNL316+C 2316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2316 with a cylindrical inner ring lying directly on the shaft.
- SNL217+C 2217 Foro cilindrico a blocco diviso - SNL217+C 2217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2217 with a cylindrical inner ring lying directly on the shaft.
- SNL224+C 3224 Foro cilindrico a blocco diviso - SNL224+C 3224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 3224 with a cylindrical inner ring lying directly on the shaft.
- SNL222+22 M Foro cilindrico a blocco diviso - SNL222+2222 M are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2222 M with a cylindrical inner ring lying directly on the shaft.
- SNL226+226 E Foro cilindrico a blocco diviso - SNL226+22226 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22226 E with a cylindrical inner ring lying directly on the shaft.
- SNL224+22224 E Foro cilindrico a blocco diviso - SNL224+22224 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22224 E with a cylindrical inner ring lying directly on the shaft.
- SNL228+23228+2CS5/VT143 Foro cilindrico a blocco diviso - SNL228+23228+2CS5/VT143 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23228-2CS5/VT143 with a cylindrical inner ring lying directly on the shaft.
- SNL228+C 2228 Foro cilindrico a blocco diviso - SNL228+C 2228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2228 with a cylindrical inner ring lying directly on the shaft.
- SNL230+23230 CC/W33 Foro cilindrico a blocco diviso - SNL230+23230 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23230 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL230+22230+2CS5/VT143 Foro cilindrico a blocco diviso - SNL230+22230+2CS5/VT143 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22230-2CS5/VT143 with a cylindrical inner ring lying directly on the shaft.
- SNL228+23228 CC/W33 Foro cilindrico a blocco diviso - SNL228+23228 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23228 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNV072+6306 Foro cilindrico a blocco diviso - SNV072+6306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6306 with a cylindrical inner ring lying directly on the shaft.
- SNL230+C 2230 Foro cilindrico a blocco diviso - SNL230+C 2230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2230 with a cylindrical inner ring lying directly on the shaft.
- SNL232+23232 CC/W33 Foro cilindrico a blocco diviso - SNL232+23232 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23232 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL232+22232+2CS5/VT143 Foro cilindrico a blocco diviso - SNL232+22232+2CS5/VT143 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22232-2CS5/VT143 with a cylindrical inner ring lying directly on the shaft.
- SNL230+22230 CC/W33 Foro cilindrico a blocco diviso - SNL230+22230 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22230 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL228+228 CC/W33 Foro cilindrico a blocco diviso - SNL228+22228 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22228 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNV072+21306 Foro cilindrico a blocco diviso - SNV072+21306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21306 with a cylindrical inner ring lying directly on the shaft.
- SNV072+1207 Foro cilindrico a blocco diviso - SNV072+1207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1207 with a cylindrical inner ring lying directly on the shaft.
- SNV072+20306 Foro cilindrico a blocco diviso - SNV072+20306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20306 with a cylindrical inner ring lying directly on the shaft.
- SNV080+6208 Foro cilindrico a blocco diviso - SNV080+6208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6208 with a cylindrical inner ring lying directly on the shaft.
- SNV080+6307 Foro cilindrico a blocco diviso - SNV080+6307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6307 with a cylindrical inner ring lying directly on the shaft.
- SNV080+20208 Foro cilindrico a blocco diviso - SNV080+20208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20208 with a cylindrical inner ring lying directly on the shaft.
- SNV072+22207 Foro cilindrico a blocco diviso - SNV072+22207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22207 with a cylindrical inner ring lying directly on the shaft.
- SNV085+1209 Foro cilindrico a blocco diviso - SNV085+1209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1209 with a cylindrical inner ring lying directly on the shaft.
- SNV090+2308 Foro cilindrico a blocco diviso - SNV090+2308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2308 with a cylindrical inner ring lying directly on the shaft.
- SNV090+6210 Foro cilindrico a blocco diviso - SNV090+6210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6210 with a cylindrical inner ring lying directly on the shaft.
- SNV090+1210 Foro cilindrico a blocco diviso - SNV090+1210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1210 with a cylindrical inner ring lying directly on the shaft.
- SNV080+2208 Foro cilindrico a blocco diviso - SNV080+2208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2208 with a cylindrical inner ring lying directly on the shaft.
- SNV080+21307 Foro cilindrico a blocco diviso - SNV080+21307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21307 with a cylindrical inner ring lying directly on the shaft.
- SNV090+22308 Foro cilindrico a blocco diviso - SNV090+22308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22308 with a cylindrical inner ring lying directly on the shaft.
- SNV100+1309 Foro cilindrico a blocco diviso - SNV100+1309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1309 with a cylindrical inner ring lying directly on the shaft.
- SNV100+21309 Foro cilindrico a blocco diviso - SNV100+21309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21309 with a cylindrical inner ring lying directly on the shaft.
- SNV085+20209 Foro cilindrico a blocco diviso - SNV085+20209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20209 with a cylindrical inner ring lying directly on the shaft.
- SNV090+6308 Foro cilindrico a blocco diviso - SNV090+6308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6308 with a cylindrical inner ring lying directly on the shaft.
- SNV100+22309 Foro cilindrico a blocco diviso - SNV100+22309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22309 with a cylindrical inner ring lying directly on the shaft.
- SNV100+1211 Foro cilindrico a blocco diviso - SNV100+1211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1211 with a cylindrical inner ring lying directly on the shaft.
- SNV085+22209 Foro cilindrico a blocco diviso - SNV085+22209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22209 with a cylindrical inner ring lying directly on the shaft.
- SNV100+6309 Foro cilindrico a blocco diviso - SNV100+6309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6309 with a cylindrical inner ring lying directly on the shaft.
- SNV100+2211 Foro cilindrico a blocco diviso - SNV100+2211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2211 with a cylindrical inner ring lying directly on the shaft.
- SNV090+2210 Foro cilindrico a blocco diviso - SNV090+2210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2210 with a cylindrical inner ring lying directly on the shaft.
- SNV090+22210 Foro cilindrico a blocco diviso - SNV090+22210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22210 with a cylindrical inner ring lying directly on the shaft.
- SNV090+20210 Foro cilindrico a blocco diviso - SNV090+20210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20210 with a cylindrical inner ring lying directly on the shaft.
- SNV110+22310 Foro cilindrico a blocco diviso - SNV110+22310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22310 with a cylindrical inner ring lying directly on the shaft.
- SNV090+21308 Foro cilindrico a blocco diviso - SNV090+21308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21308 with a cylindrical inner ring lying directly on the shaft.
- SNV100+2309 Foro cilindrico a blocco diviso - SNV100+2309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2309 with a cylindrical inner ring lying directly on the shaft.
- SNV110+1310 Foro cilindrico a blocco diviso - SNV110+1310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1310 with a cylindrical inner ring lying directly on the shaft.
- SNV110+21310 Foro cilindrico a blocco diviso - SNV110+21310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21310 with a cylindrical inner ring lying directly on the shaft.
- SNV110+6212 Foro cilindrico a blocco diviso - SNV110+6212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6212 with a cylindrical inner ring lying directly on the shaft.
- SNV100+20211 Foro cilindrico a blocco diviso - SNV100+20211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20211 with a cylindrical inner ring lying directly on the shaft.
- SNV120+1213 Foro cilindrico a blocco diviso - SNV120+1213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1213 with a cylindrical inner ring lying directly on the shaft.
- SNV100+20309 Foro cilindrico a blocco diviso - SNV100+20309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20309 with a cylindrical inner ring lying directly on the shaft.
- SNV120+21311 Foro cilindrico a blocco diviso - SNV120+21311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 21311 with a cylindrical inner ring lying directly on the shaft.
- SNV110+22212 Foro cilindrico a blocco diviso - SNV110+22212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22212 with a cylindrical inner ring lying directly on the shaft.
- SNV110+6310 Foro cilindrico a blocco diviso - SNV110+6310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6310 with a cylindrical inner ring lying directly on the shaft.
- SNV110+20212 Foro cilindrico a blocco diviso - SNV110+20212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20212 with a cylindrical inner ring lying directly on the shaft.
- SNV120+6311 Foro cilindrico a blocco diviso - SNV120+6311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6311 with a cylindrical inner ring lying directly on the shaft.
- SNV120+1311 Foro cilindrico a blocco diviso - SNV120+1311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1311 with a cylindrical inner ring lying directly on the shaft.
- SNV110+2212 Foro cilindrico a blocco diviso - SNV110+2212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2212 with a cylindrical inner ring lying directly on the shaft.
- SNV125+1214 Foro cilindrico a blocco diviso - SNV125+1214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1214 with a cylindrical inner ring lying directly on the shaft.
- SNV120+20311 Foro cilindrico a blocco diviso - SNV120+20311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20311 with a cylindrical inner ring lying directly on the shaft.
- SNV130+1312 Foro cilindrico a blocco diviso - SNV130+1312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1312 with a cylindrical inner ring lying directly on the shaft.
- SNV125+22214 Foro cilindrico a blocco diviso - SNV125+22214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22214 with a cylindrical inner ring lying directly on the shaft.
- SNV130+2215 Foro cilindrico a blocco diviso - SNV130+2215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2215 with a cylindrical inner ring lying directly on the shaft.
- SNV130+6215 Foro cilindrico a blocco diviso - SNV130+6215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6215 with a cylindrical inner ring lying directly on the shaft.
- SNV125+2214 Foro cilindrico a blocco diviso - SNV125+2214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2214 with a cylindrical inner ring lying directly on the shaft.
- SNV130+22215 Foro cilindrico a blocco diviso - SNV130+22215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22215 with a cylindrical inner ring lying directly on the shaft.
- SNV130+22312 Foro cilindrico a blocco diviso - SNV130+22312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22312 with a cylindrical inner ring lying directly on the shaft.
- SNV140+1313 Foro cilindrico a blocco diviso - SNV140+1313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1313 with a cylindrical inner ring lying directly on the shaft.
- SNV140+22313 Foro cilindrico a blocco diviso - SNV140+22313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22313 with a cylindrical inner ring lying directly on the shaft.
- SNV130+1215 Foro cilindrico a blocco diviso - SNV130+1215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1215 with a cylindrical inner ring lying directly on the shaft.
- SNV140+6313 Foro cilindrico a blocco diviso - SNV140+6313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6313 with a cylindrical inner ring lying directly on the shaft.
- SNV140+20313 Foro cilindrico a blocco diviso - SNV140+20313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20313 with a cylindrical inner ring lying directly on the shaft.
- SNV140+2216 Foro cilindrico a blocco diviso - SNV140+2216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2216 with a cylindrical inner ring lying directly on the shaft.
- SNV150+6314 Foro cilindrico a blocco diviso - SNV150+6314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6314 with a cylindrical inner ring lying directly on the shaft.
- SNV150+1314 Foro cilindrico a blocco diviso - SNV150+1314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1314 with a cylindrical inner ring lying directly on the shaft.
- SNV140+20216 Foro cilindrico a blocco diviso - SNV140+20216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20216 with a cylindrical inner ring lying directly on the shaft.
- SNV160+22315 Foro cilindrico a blocco diviso - SNV160+22315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22315 with a cylindrical inner ring lying directly on the shaft.
- SNV160+2315 Foro cilindrico a blocco diviso - SNV160+2315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2315 with a cylindrical inner ring lying directly on the shaft.
- SNV160+22218 Foro cilindrico a blocco diviso - SNV160+22218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22218 with a cylindrical inner ring lying directly on the shaft.
- SNV170+1219 Foro cilindrico a blocco diviso - SNV170+1219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1219 with a cylindrical inner ring lying directly on the shaft.
- SNC317+21317 Foro cilindrico a blocco diviso - SNC317+21317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21317 with a cylindrical inner ring lying directly on the shaft.
- SNC218+22218 Foro cilindrico a blocco diviso - SNC218+22218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22218 with a cylindrical inner ring lying directly on the shaft.
- SNC318+1318 Foro cilindrico a blocco diviso - SNC318+1318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1318 with a cylindrical inner ring lying directly on the shaft.
- SNC318+21318 Foro cilindrico a blocco diviso - SNC318+21318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21318 with a cylindrical inner ring lying directly on the shaft.
- SNC219+1219 Foro cilindrico a blocco diviso - SNC219+1219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1219 with a cylindrical inner ring lying directly on the shaft.
- SNC219+22219 Foro cilindrico a blocco diviso - SNC219+22219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22219 with a cylindrical inner ring lying directly on the shaft.
- SNC318+2318 Foro cilindrico a blocco diviso - SNC318+2318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2318 with a cylindrical inner ring lying directly on the shaft.
- SNC319+1319 Foro cilindrico a blocco diviso - SNC319+1319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1319 with a cylindrical inner ring lying directly on the shaft.
- SNC220+1220 Foro cilindrico a blocco diviso - SNC220+1220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1220 with a cylindrical inner ring lying directly on the shaft.
- SNC220+23220 Foro cilindrico a blocco diviso - SNC220+23220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23220 with a cylindrical inner ring lying directly on the shaft.
- SNC319+21319 Foro cilindrico a blocco diviso - SNC319+21319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21319 with a cylindrical inner ring lying directly on the shaft.
- SNC222+222 Foro cilindrico a blocco diviso - SNC222+22222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22222 with a cylindrical inner ring lying directly on the shaft.
- SNC230+22230 Foro cilindrico a blocco diviso - SNC230+22230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22230 with a cylindrical inner ring lying directly on the shaft.
- SNC224+23224 Foro cilindrico a blocco diviso - SNC224+23224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23224 with a cylindrical inner ring lying directly on the shaft.
- SNC232+232 Foro cilindrico a blocco diviso - SNC232+23232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23232 with a cylindrical inner ring lying directly on the shaft.
- SNC226+226 Foro cilindrico a blocco diviso - SNC226+22226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22226 with a cylindrical inner ring lying directly on the shaft.
- SNL205+22205 E Foro cilindrico a blocco diviso - SNL205+22205 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22205 E with a cylindrical inner ring lying directly on the shaft.
- SNL206+2206 ETN9 Foro cilindrico a blocco diviso - SNL206+2206 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2206 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNC228+23228 Foro cilindrico a blocco diviso - SNC228+23228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23228 with a cylindrical inner ring lying directly on the shaft.
- SNL305+2305 ETN9 Foro cilindrico a blocco diviso - SNL305+2305 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2305 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNC232+22232 Foro cilindrico a blocco diviso - SNC232+22232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22232 with a cylindrical inner ring lying directly on the shaft.
- SNL205+2205 ETN9 Foro cilindrico a blocco diviso - SNL205+2205 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2205 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL207+22207 E Foro cilindrico a blocco diviso - SNL207+22207 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22207 E with a cylindrical inner ring lying directly on the shaft.
- SNL306+21306 CC Foro cilindrico a blocco diviso - SNL306+21306 CC are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21306 CC with a cylindrical inner ring lying directly on the shaft.
- SNL306+1306 ETN9 Foro cilindrico a blocco diviso - SNL306+1306 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1306 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL308+1308 ETN9 Foro cilindrico a blocco diviso - SNL308+1308 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1308 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL206+22206 E Foro cilindrico a blocco diviso - SNL206+22206 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22206 E with a cylindrical inner ring lying directly on the shaft.
- SNL211+1211 ETN9 Foro cilindrico a blocco diviso - SNL211+1211 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1211 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL209+C 2209 TN9 Foro cilindrico a blocco diviso - SNL209+C 2209 TN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2209 TN9 with a cylindrical inner ring lying directly on the shaft.
- SNL207+2207 ETN9 Foro cilindrico a blocco diviso - SNL207+2207 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2207 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL209+1209 ETN9 Foro cilindrico a blocco diviso - SNL209+1209 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1209 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL207+C 2207 TN9 Foro cilindrico a blocco diviso - SNL207+C 2207 TN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2207 TN9 with a cylindrical inner ring lying directly on the shaft.
- SNL308+2308 ETN9 Foro cilindrico a blocco diviso - SNL308+2308 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2308 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL309+22309 E Foro cilindrico a blocco diviso - SNL309+22309 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22309 E with a cylindrical inner ring lying directly on the shaft.
- SNL309+21309 E Foro cilindrico a blocco diviso - SNL309+21309 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21309 E with a cylindrical inner ring lying directly on the shaft.
- SNL309+1309 ETN9 Foro cilindrico a blocco diviso - SNL309+1309 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1309 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL310+22310 E Foro cilindrico a blocco diviso - SNL310+22310 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22310 E with a cylindrical inner ring lying directly on the shaft.
- SNL209+22209 E Foro cilindrico a blocco diviso - SNL209+22209 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22209 E with a cylindrical inner ring lying directly on the shaft.
- SNL212+2212 ETN9 Foro cilindrico a blocco diviso - SNL212+2212 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2212 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL310+1310 ETN9 Foro cilindrico a blocco diviso - SNL310+1310 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1310 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL311+22311 E Foro cilindrico a blocco diviso - SNL311+22311 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22311 E with a cylindrical inner ring lying directly on the shaft.
- SNL310+21310 E Foro cilindrico a blocco diviso - SNL310+21310 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21310 E with a cylindrical inner ring lying directly on the shaft.
- SNL311+21311 E Foro cilindrico a blocco diviso - SNL311+21311 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21311 E with a cylindrical inner ring lying directly on the shaft.
- SNL311+1311 ETN9 Foro cilindrico a blocco diviso - SNL311+1311 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1311 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL213+C 2213 TN9 Foro cilindrico a blocco diviso - SNL213+C 2213 TN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2213 TN9 with a cylindrical inner ring lying directly on the shaft.
- SNL309+2309 ETN9 Foro cilindrico a blocco diviso - SNL309+2309 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2309 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL211+C 2211 TN9 Foro cilindrico a blocco diviso - SNL211+C 2211 TN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2211 TN9 with a cylindrical inner ring lying directly on the shaft.
- SNL211+2211 ETN9 Foro cilindrico a blocco diviso - SNL211+2211 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2211 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL313+22313 E Foro cilindrico a blocco diviso - SNL313+22313 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22313 E with a cylindrical inner ring lying directly on the shaft.
- SNL212+C 2212 TN9 Foro cilindrico a blocco diviso - SNL212+C 2212 TN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2212 TN9 with a cylindrical inner ring lying directly on the shaft.
- SNL312+22312 E Foro cilindrico a blocco diviso - SNL312+22312 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22312 E with a cylindrical inner ring lying directly on the shaft.
- SNL312+1312 ETN9 Foro cilindrico a blocco diviso - SNL312+1312 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1312 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL212+1212 ETN9 Foro cilindrico a blocco diviso - SNL212+1212 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1212 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL213+22213 E Foro cilindrico a blocco diviso - SNL213+22213 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22213 E with a cylindrical inner ring lying directly on the shaft.
- SNL213+1213 ETN9 Foro cilindrico a blocco diviso - SNL213+1213 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1213 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL214+22314 E Foro cilindrico a blocco diviso - SNL214+22314 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22314 E with a cylindrical inner ring lying directly on the shaft.
- SNL215+22215 E Foro cilindrico a blocco diviso - SNL215+22215 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22215 E with a cylindrical inner ring lying directly on the shaft.
- SNL211+22211 E Foro cilindrico a blocco diviso - SNL211+22211 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22211 E with a cylindrical inner ring lying directly on the shaft.
- SNL212+22212 E Foro cilindrico a blocco diviso - SNL212+22212 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22212 E with a cylindrical inner ring lying directly on the shaft.
- SNL313+1313 ETN9 Foro cilindrico a blocco diviso - SNL313+1313 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1313 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL216+2216 ETN9 Foro cilindrico a blocco diviso - SNL216+2216 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2216 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL214+21314 E Foro cilindrico a blocco diviso - SNL214+21314 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21314 E with a cylindrical inner ring lying directly on the shaft.
- SNL215+2215 ETN9 Foro cilindrico a blocco diviso - SNL215+2215 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2215 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL215+C 2215 Foro cilindrico a blocco diviso - SNL215+C 2215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2215 with a cylindrical inner ring lying directly on the shaft.
- SNL214+C 2314 Foro cilindrico a blocco diviso - SNL214+C 2314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2314 with a cylindrical inner ring lying directly on the shaft.
- SNL312+21312 E Foro cilindrico a blocco diviso - SNL312+21312 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21312 E with a cylindrical inner ring lying directly on the shaft.
- SNL213+2213 ETN9 Foro cilindrico a blocco diviso - SNL213+2213 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2213 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL315+C 2315 Foro cilindrico a blocco diviso - SNL315+C 2315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2315 with a cylindrical inner ring lying directly on the shaft.
- SNL313+21313 E Foro cilindrico a blocco diviso - SNL313+21313 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21313 E with a cylindrical inner ring lying directly on the shaft.
- SNL218+23218 CC/W33 Foro cilindrico a blocco diviso - SNL218+23218 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23218 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL218+C 2218 Foro cilindrico a blocco diviso - SNL218+C 2218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2218 with a cylindrical inner ring lying directly on the shaft.
- SNL317+22317 E Foro cilindrico a blocco diviso - SNL317+22317 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22317 E with a cylindrical inner ring lying directly on the shaft.
- SNL218+22218 E Foro cilindrico a blocco diviso - SNL218+22218 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22218 E with a cylindrical inner ring lying directly on the shaft.
- SNL315+21315 E Foro cilindrico a blocco diviso - SNL315+21315 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21315 E with a cylindrical inner ring lying directly on the shaft.
- SNL216+22216 E Foro cilindrico a blocco diviso - SNL216+22216 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22216 E with a cylindrical inner ring lying directly on the shaft.
- SNL316+22316 E Foro cilindrico a blocco diviso - SNL316+22316 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22316 E with a cylindrical inner ring lying directly on the shaft.
- SNL219+22319 E Foro cilindrico a blocco diviso - SNL219+22319 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22319 E with a cylindrical inner ring lying directly on the shaft.
- SNL217+22217 E Foro cilindrico a blocco diviso - SNL217+22217 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22217 E with a cylindrical inner ring lying directly on the shaft.
- SNL220+C 2220 Foro cilindrico a blocco diviso - SNL220+C 2220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2220 with a cylindrical inner ring lying directly on the shaft.
- SNL317+21317 E Foro cilindrico a blocco diviso - SNL317+21317 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21317 E with a cylindrical inner ring lying directly on the shaft.
- SNL315+22315 E Foro cilindrico a blocco diviso - SNL315+22315 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22315 E with a cylindrical inner ring lying directly on the shaft.
- SNL320+21320 E Foro cilindrico a blocco diviso - SNL320+21320 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21320 E with a cylindrical inner ring lying directly on the shaft.
- SNL219+2319 M Foro cilindrico a blocco diviso - SNL219+2319 M are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2319 M with a cylindrical inner ring lying directly on the shaft.
- SNL219+21319 E Foro cilindrico a blocco diviso - SNL219+21319 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21319 E with a cylindrical inner ring lying directly on the shaft.
- SNL220+23220 CC/W33 Foro cilindrico a blocco diviso - SNL220+23220 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23220 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL224+23224 CC/W33 Foro cilindrico a blocco diviso - SNL224+23224 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23224 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL222+222 E Foro cilindrico a blocco diviso - SNL222+22222 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22222 E with a cylindrical inner ring lying directly on the shaft.
- SNL220+2220 M Foro cilindrico a blocco diviso - SNL220+2220 M are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2220 M with a cylindrical inner ring lying directly on the shaft.
- SNL220+22220 E Foro cilindrico a blocco diviso - SNL220+22220 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22220 E with a cylindrical inner ring lying directly on the shaft.
- SNL320+2320 M Foro cilindrico a blocco diviso - SNL320+2320 M are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2320 M with a cylindrical inner ring lying directly on the shaft.
- SNL224+1224 M Foro cilindrico a blocco diviso - SNL224+1224 M are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1224 M with a cylindrical inner ring lying directly on the shaft.
- SNL320+C 2320 Foro cilindrico a blocco diviso - SNL320+C 2320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2320 with a cylindrical inner ring lying directly on the shaft.
- SNL320+22320 E Foro cilindrico a blocco diviso - SNL320+22320 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22320 E with a cylindrical inner ring lying directly on the shaft.
- SNL222+23222 CC/W33 Foro cilindrico a blocco diviso - SNL222+23222 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23222 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL222+C 2222 Foro cilindrico a blocco diviso - SNL222+C 2222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2222 with a cylindrical inner ring lying directly on the shaft.
- SNL228+228+2CS5/VT143 Foro cilindrico a blocco diviso - SNL228+22228+2CS5/VT143 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22228-2CS5/VT143 with a cylindrical inner ring lying directly on the shaft.
- SNL226+23226 CC/W33 Foro cilindrico a blocco diviso - SNL226+23226 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23226 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNL226+1226 M Foro cilindrico a blocco diviso - SNL226+1226 M are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1226 M with a cylindrical inner ring lying directly on the shaft.
- SNL226+23226+2CS5/VT143 Foro cilindrico a blocco diviso - SNL226+23226+2CS5/VT143 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23226-2CS5/VT143 with a cylindrical inner ring lying directly on the shaft.
- SNL226+C 2226 Foro cilindrico a blocco diviso - SNL226+C 2226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 2226 with a cylindrical inner ring lying directly on the shaft.
- SNL232+C 3232 Foro cilindrico a blocco diviso - SNL232+C 3232 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings C 3232 with a cylindrical inner ring lying directly on the shaft.
- SNV072+1306 Foro cilindrico a blocco diviso - SNV072+1306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1306 with a cylindrical inner ring lying directly on the shaft.
- SNL230+23230+2CS5/VT143 Foro cilindrico a blocco diviso - SNL230+23230+2CS5/VT143 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 23230-2CS5/VT143 with a cylindrical inner ring lying directly on the shaft.
- SNL232+22232 CC/W33 Foro cilindrico a blocco diviso - SNL232+22232 CC/W33 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22232 CC/W33 with a cylindrical inner ring lying directly on the shaft.
- SNV072+20207 Foro cilindrico a blocco diviso - SNV072+20207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20207 with a cylindrical inner ring lying directly on the shaft.
- SNV080+1307 Foro cilindrico a blocco diviso - SNV080+1307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1307 with a cylindrical inner ring lying directly on the shaft.
- SNV072+2306 Foro cilindrico a blocco diviso - SNV072+2306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2306 with a cylindrical inner ring lying directly on the shaft.
- SNV080+20307 Foro cilindrico a blocco diviso - SNV080+20307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 20307 with a cylindrical inner ring lying directly on the shaft.
- SNV080+2307 Foro cilindrico a blocco diviso - SNV080+2307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2307 with a cylindrical inner ring lying directly on the shaft.
- SNV072+2207 Foro cilindrico a blocco diviso - SNV072+2207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2207 with a cylindrical inner ring lying directly on the shaft.
- SNV080+1208 Foro cilindrico a blocco diviso - SNV080+1208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1208 with a cylindrical inner ring lying directly on the shaft.
- SNV085+6209 Foro cilindrico a blocco diviso - SNV085+6209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 6209 with a cylindrical inner ring lying directly on the shaft.
- SNV085+2209 Foro cilindrico a blocco diviso - SNV085+2209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 2209 with a cylindrical inner ring lying directly on the shaft.
- SNV080+22208 Foro cilindrico a blocco diviso - SNV080+22208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 22208 with a cylindrical inner ring lying directly on the shaft.
- SNV090+1308 Foro cilindrico a blocco diviso - SNV090+1308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNV pillow block housing have bearings 1308 with a cylindrical inner ring lying directly on the shaft.
- SNV215+23224K+H2324 Manica adattatore blocco diviso - SNV215+23224K+H2324 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23224K are attached to the shaft using an adapter sleeve H2324. Other parts are locating ring FRM215/5 of which two are required per unit.
- SNV250+20228K+H3028 Manica adattatore a blocchi split - SNV250+20228K+H3028 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20228K are attached to the shaft using an adapter sleeve H3028. Other parts are locating ring FRM250/28 of which two are required per unit.
- SNV250+228K+H3128 Manica adattatore a blocchi split - SNV250+22228K+H3128 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22228K are attached to the shaft using an adapter sleeve H3128. Other parts are locating ring FRM250/15 of which two are required per unit.
- SNV270+22230K+H3130 Manica adattatore blocco diviso - SNV270+22230K+H3130 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22230K are attached to the shaft using an adapter sleeve H3130. Other parts are locating ring FRM270/16,5 of which two are required per unit.
- SNV300+22328K+H2328 Manica adattatore a blocchi split - SNV300+22328K+H2328 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22328K are attached to the shaft using an adapter sleeve H2328. Other parts are locating ring FRM300/5 of which two are required per unit.
- SNV290+22232K+H3132 Manicotto adattatore blocco diviso - SNV290+22232K+H3132 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22232K are attached to the shaft using an adapter sleeve H3132. Other parts are locating ring FRM290/17 of which two are required per unit.
- SNV290+20232K+H3032 Manica adattatore a blocchi split - SNV290+20232K+H3032 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20232K are attached to the shaft using an adapter sleeve H3032. Other parts are locating ring FRM290/33 of which two are required per unit.
- SNV270+23230K+H2330 Manica adattatore a blocchi split - SNV270+23230K+H2330 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23230K are attached to the shaft using an adapter sleeve H2330. Other parts are locating ring FRM270/5 of which two are required per unit.
- SNC205+22205 Foro cilindrico a blocco diviso - SNC205+22205 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22205 with a cylindrical inner ring lying directly on the shaft.
- SNC206+22206 Foro cilindrico a blocco diviso - SNC206+22206 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22206 with a cylindrical inner ring lying directly on the shaft.
- SNC206+1206 Foro cilindrico a blocco diviso - SNC206+1206 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1206 with a cylindrical inner ring lying directly on the shaft.
- SNC307+2307 Foro cilindrico a blocco diviso - SNC307+2307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2307 with a cylindrical inner ring lying directly on the shaft.
- SNC306+21306 Foro cilindrico a blocco diviso - SNC306+21306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21306 with a cylindrical inner ring lying directly on the shaft.
- SNC207+22207 Foro cilindrico a blocco diviso - SNC207+22207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22207 with a cylindrical inner ring lying directly on the shaft.
- SNV340+22332K+H2332 Manica adattatore a blocchi split - SNV340+22332K+H2332 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22332K are attached to the shaft using an adapter sleeve H2332. Other parts are locating ring FRM340/5 of which two are required per unit.
- SNC208+22208 Foro cilindrico a blocco diviso - SNC208+22208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22208 with a cylindrical inner ring lying directly on the shaft.
- SNC308+22308 Foro cilindrico a blocco diviso - SNC308+22308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22308 with a cylindrical inner ring lying directly on the shaft.
- SNC308+1308 Foro cilindrico a blocco diviso - SNC308+1308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1308 with a cylindrical inner ring lying directly on the shaft.
- SNC307+1307 Foro cilindrico a blocco diviso - SNC307+1307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1307 with a cylindrical inner ring lying directly on the shaft.
- SNC210+1210 Foro cilindrico a blocco diviso - SNC210+1210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1210 with a cylindrical inner ring lying directly on the shaft.
- SNC209+2209 Foro cilindrico a blocco diviso - SNC209+2209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2209 with a cylindrical inner ring lying directly on the shaft.
- SNC209+1209 Foro cilindrico a blocco diviso - SNC209+1209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1209 with a cylindrical inner ring lying directly on the shaft.
- SNC210+2210 Foro cilindrico a blocco diviso - SNC210+2210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2210 with a cylindrical inner ring lying directly on the shaft.
- SNC212+1212 Foro cilindrico a blocco diviso - SNC212+1212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1212 with a cylindrical inner ring lying directly on the shaft.
- SNC308+2308 Foro cilindrico a blocco diviso - SNC308+2308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2308 with a cylindrical inner ring lying directly on the shaft.
- SNC309+21309 Foro cilindrico a blocco diviso - SNC309+21309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21309 with a cylindrical inner ring lying directly on the shaft.
- SNC210+22210 Foro cilindrico a blocco diviso - SNC210+22210 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22210 with a cylindrical inner ring lying directly on the shaft.
- SNC310+21310 Foro cilindrico a blocco diviso - SNC310+21310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21310 with a cylindrical inner ring lying directly on the shaft.
- SNC310+22310 Foro cilindrico a blocco diviso - SNC310+22310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22310 with a cylindrical inner ring lying directly on the shaft.
- SNC212+22212 Foro cilindrico a blocco diviso - SNC212+22212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22212 with a cylindrical inner ring lying directly on the shaft.
- SNC312+1312 Foro cilindrico a blocco diviso - SNC312+1312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1312 with a cylindrical inner ring lying directly on the shaft.
- SNC211+1211 Foro cilindrico a blocco diviso - SNC211+1211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1211 with a cylindrical inner ring lying directly on the shaft.
- SNC313+21313 Foro cilindrico a blocco diviso - SNC313+21313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21313 with a cylindrical inner ring lying directly on the shaft.
- SNC211+22211 Foro cilindrico a blocco diviso - SNC211+22211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22211 with a cylindrical inner ring lying directly on the shaft.
- SNC213+2213 Foro cilindrico a blocco diviso - SNC213+2213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2213 with a cylindrical inner ring lying directly on the shaft.
- SNC313+22313 Foro cilindrico a blocco diviso - SNC313+22313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22313 with a cylindrical inner ring lying directly on the shaft.
- SNC312+22312 Foro cilindrico a blocco diviso - SNC312+22312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22312 with a cylindrical inner ring lying directly on the shaft.
- SNC312+21312 Foro cilindrico a blocco diviso - SNC312+21312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21312 with a cylindrical inner ring lying directly on the shaft.
- SNC311+22311 Foro cilindrico a blocco diviso - SNC311+22311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22311 with a cylindrical inner ring lying directly on the shaft.
- SNC213+22213 Foro cilindrico a blocco diviso - SNC213+22213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22213 with a cylindrical inner ring lying directly on the shaft.
- SNC314+21314 Foro cilindrico a blocco diviso - SNC314+21314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21314 with a cylindrical inner ring lying directly on the shaft.
- SNC314+22314 Foro cilindrico a blocco diviso - SNC314+22314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22314 with a cylindrical inner ring lying directly on the shaft.
- SNC311+2311 Foro cilindrico a blocco diviso - SNC311+2311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2311 with a cylindrical inner ring lying directly on the shaft.
- SNC314+2314 Foro cilindrico a blocco diviso - SNC314+2314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2314 with a cylindrical inner ring lying directly on the shaft.
- SNC212+2212 Foro cilindrico a blocco diviso - SNC212+2212 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2212 with a cylindrical inner ring lying directly on the shaft.
- SNC312+2312 Foro cilindrico a blocco diviso - SNC312+2312 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2312 with a cylindrical inner ring lying directly on the shaft.
- SNC313+1313 Foro cilindrico a blocco diviso - SNC313+1313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1313 with a cylindrical inner ring lying directly on the shaft.
- SNC315+2315 Foro cilindrico a blocco diviso - SNC315+2315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2315 with a cylindrical inner ring lying directly on the shaft.
- SNC213+1213 Foro cilindrico a blocco diviso - SNC213+1213 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1213 with a cylindrical inner ring lying directly on the shaft.
- SNC214+2214 Foro cilindrico a blocco diviso - SNC214+2214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2214 with a cylindrical inner ring lying directly on the shaft.
- SNC313+2313 Foro cilindrico a blocco diviso - SNC313+2313 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2313 with a cylindrical inner ring lying directly on the shaft.
- SNC316+1316 Foro cilindrico a blocco diviso - SNC316+1316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1316 with a cylindrical inner ring lying directly on the shaft.
- SNC214+1214 Foro cilindrico a blocco diviso - SNC214+1214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1214 with a cylindrical inner ring lying directly on the shaft.
- SNC315+1315 Foro cilindrico a blocco diviso - SNC315+1315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1315 with a cylindrical inner ring lying directly on the shaft.
- SNC215+2215 Foro cilindrico a blocco diviso - SNC215+2215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2215 with a cylindrical inner ring lying directly on the shaft.
- SNC217+1217 Foro cilindrico a blocco diviso - SNC217+1217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1217 with a cylindrical inner ring lying directly on the shaft.
- SNC315+22315 Foro cilindrico a blocco diviso - SNC315+22315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22315 with a cylindrical inner ring lying directly on the shaft.
- SNC315+21315 Foro cilindrico a blocco diviso - SNC315+21315 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21315 with a cylindrical inner ring lying directly on the shaft.
- SNC215+22215 Foro cilindrico a blocco diviso - SNC215+22215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22215 with a cylindrical inner ring lying directly on the shaft.
- SNC217+2217 Foro cilindrico a blocco diviso - SNC217+2217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2217 with a cylindrical inner ring lying directly on the shaft.
- SNC314+1314 Foro cilindrico a blocco diviso - SNC314+1314 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1314 with a cylindrical inner ring lying directly on the shaft.
- SNC216+22216 Foro cilindrico a blocco diviso - SNC216+22216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22216 with a cylindrical inner ring lying directly on the shaft.
- SNC215+1215 Foro cilindrico a blocco diviso - SNC215+1215 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1215 with a cylindrical inner ring lying directly on the shaft.
- SNC317+22317 Foro cilindrico a blocco diviso - SNC317+22317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22317 with a cylindrical inner ring lying directly on the shaft.
- SNC316+21316 Foro cilindrico a blocco diviso - SNC316+21316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21316 with a cylindrical inner ring lying directly on the shaft.
- SNC217+22217 Foro cilindrico a blocco diviso - SNC217+22217 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22217 with a cylindrical inner ring lying directly on the shaft.
- SNC216+2216 Foro cilindrico a blocco diviso - SNC216+2216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2216 with a cylindrical inner ring lying directly on the shaft.
- SNC316+22316 Foro cilindrico a blocco diviso - SNC316+22316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22316 with a cylindrical inner ring lying directly on the shaft.
- SNC317+1317 Foro cilindrico a blocco diviso - SNC317+1317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1317 with a cylindrical inner ring lying directly on the shaft.
- SNC218+23218 Foro cilindrico a blocco diviso - SNC218+23218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23218 with a cylindrical inner ring lying directly on the shaft.
- SNC218+1218 Foro cilindrico a blocco diviso - SNC218+1218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1218 with a cylindrical inner ring lying directly on the shaft.
- SNC216+1216 Foro cilindrico a blocco diviso - SNC216+1216 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1216 with a cylindrical inner ring lying directly on the shaft.
- SNC316+2316 Foro cilindrico a blocco diviso - SNC316+2316 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2316 with a cylindrical inner ring lying directly on the shaft.
- SNC317+2317 Foro cilindrico a blocco diviso - SNC317+2317 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2317 with a cylindrical inner ring lying directly on the shaft.
- SNC219+2219 Foro cilindrico a blocco diviso - SNC219+2219 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2219 with a cylindrical inner ring lying directly on the shaft.
- SNC318+22318 Foro cilindrico a blocco diviso - SNC318+22318 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22318 with a cylindrical inner ring lying directly on the shaft.
- SNC218+2218 Foro cilindrico a blocco diviso - SNC218+2218 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2218 with a cylindrical inner ring lying directly on the shaft.
- SNC320+1320 Foro cilindrico a blocco diviso - SNC320+1320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1320 with a cylindrical inner ring lying directly on the shaft.
- SNC319+22319 Foro cilindrico a blocco diviso - SNC319+22319 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22319 with a cylindrical inner ring lying directly on the shaft.
- SNC220+2220 Foro cilindrico a blocco diviso - SNC220+2220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2220 with a cylindrical inner ring lying directly on the shaft.
- SNC222+23222 Foro cilindrico a blocco diviso - SNC222+23222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23222 with a cylindrical inner ring lying directly on the shaft.
- SNC222+22 Foro cilindrico a blocco diviso - SNC222+2222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2222 with a cylindrical inner ring lying directly on the shaft.
- SNC224+22224 Foro cilindrico a blocco diviso - SNC224+22224 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22224 with a cylindrical inner ring lying directly on the shaft.
- SNC220+22220 Foro cilindrico a blocco diviso - SNC220+22220 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22220 with a cylindrical inner ring lying directly on the shaft.
- SNC320+21320 Foro cilindrico a blocco diviso - SNC320+21320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21320 with a cylindrical inner ring lying directly on the shaft.
- SNC320+22320 Foro cilindrico a blocco diviso - SNC320+22320 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22320 with a cylindrical inner ring lying directly on the shaft.
- SNC228+228 Foro cilindrico a blocco diviso - SNC228+22228 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22228 with a cylindrical inner ring lying directly on the shaft.
- SNC226+23226 Foro cilindrico a blocco diviso - SNC226+23226 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23226 with a cylindrical inner ring lying directly on the shaft.
- SNC222+1222 Foro cilindrico a blocco diviso - SNC222+1222 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1222 with a cylindrical inner ring lying directly on the shaft.
- SNL305+1305 ETN9 Foro cilindrico a blocco diviso - SNL305+1305 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1305 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL305+21305 CC Foro cilindrico a blocco diviso - SNL305+21305 CC are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21305 CC with a cylindrical inner ring lying directly on the shaft.
- SNC230+23230 Foro cilindrico a blocco diviso - SNC230+23230 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 23230 with a cylindrical inner ring lying directly on the shaft.
- SNL205+1205 ETN9 Foro cilindrico a blocco diviso - SNL205+1205 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 1205 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL308+22308 E Foro cilindrico a blocco diviso - SNL308+22308 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 22308 E with a cylindrical inner ring lying directly on the shaft.
- SNL308+21308 E Foro cilindrico a blocco diviso - SNL308+21308 E are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 21308 E with a cylindrical inner ring lying directly on the shaft.
- SNL209+2209 ETN9 Foro cilindrico a blocco diviso - SNL209+2209 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2209 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNL210+2210 ETN9 Foro cilindrico a blocco diviso - SNL210+2210 ETN9 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNL pillow block housing have bearings 2210 ETN9 with a cylindrical inner ring lying directly on the shaft.
- SNV080+1307K+H307 Manica adattatore blocco diviso - SNV080+1307K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1307K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRM80/9 of which two are required per unit.
- SNV080+21307K+H307 Manica adattatore blocco diviso - SNV080+21307K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21307K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRM80/9 of which two are required per unit.
- SNV080+20208K+H208 Manica adattatore a blocchi split - SNV080+20208K+H208 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20208K are attached to the shaft using an adapter sleeve H208. Other parts are locating ring FRM80/10,5 of which two are required per unit.
- SNV080+22208K+H308 Manica adattatore a blocchi split - SNV080+22208K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22208K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRM80/8 of which two are required per unit.
- SNV085+2209K+H309 Manica adattatore blocco diviso - SNV085+2209K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2209K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRM85/4 of which two are required per unit.
- SNV100+1309K+H309 Manicotto adattatore blocco diviso - SNV100+1309K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1309K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRM100/9,5 of which two are required per unit.
- SNV100+1211K+H211 Manica adattatore blocco diviso - SNV100+1211K+H211 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1211K are attached to the shaft using an adapter sleeve H211. Other parts are locating ring FRM100/11,5 of which two are required per unit.
- SNV100+20211K+H211 Manica adattatore blocco diviso - SNV100+20211K+H211 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20211K are attached to the shaft using an adapter sleeve H211. Other parts are locating ring FRM100/11,5 of which two are required per unit.
- SNV120+2213K+H313 Manicotto adattatore blocco diviso - SNV120+2213K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2213K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRM120/10 of which two are required per unit.
- SNV110+20212K+H212 Manicotto adattatore blocco diviso - SNV110+20212K+H212 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20212K are attached to the shaft using an adapter sleeve H212. Other parts are locating ring FRM110/13 of which two are required per unit.
- SNV110+21310K+H310 Manicotto adattatore blocco diviso - SNV110+21310K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21310K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRM110/10,5 of which two are required per unit.
- SNV120+22311K+H2311 Manicotto adattatore blocco diviso - SNV120+22311K+H2311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22311K are attached to the shaft using an adapter sleeve H2311. Other parts are locating ring FRM120/4 of which two are required per unit.
- SNV110+22310K+H2310 Manicotto adattatore blocco diviso - SNV110+22310K+H2310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22310K are attached to the shaft using an adapter sleeve H2310. Other parts are locating ring FRM110/4 of which two are required per unit.
- SNV130+1312K+H312 Manica adattatore blocco diviso - SNV130+1312K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1312K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRM130/12,5 of which two are required per unit.
- SNV140+13K+H313 Manicotto adattatore blocco diviso - SNV140+1313K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1313K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRM140/12,5 of which two are required per unit.
- SNV140+213K+H313 Manicotto adattatore blocco diviso - SNV140+21313K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21313K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRM140/12,5 of which two are required per unit.
- SNV140+1216K+H216 Manicotto adattatore blocco diviso - SNV140+1216K+H216 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1216K are attached to the shaft using an adapter sleeve H216. Other parts are locating ring FRM140/16 of which two are required per unit.
- SNV130+21312K+H312 Manica adattatore blocco diviso - SNV130+21312K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21312K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRM130/12,5 of which two are required per unit.
- SNV140+2313K+H2313 Manicotto adattatore a blocchi split - SNV140+2313K+H2313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2313K are attached to the shaft using an adapter sleeve H2313. Other parts are locating ring FRM140/5 of which two are required per unit.
- SNV130+1215K+H215 Manica adattatore blocco diviso - SNV130+1215K+H215 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1215K are attached to the shaft using an adapter sleeve H215. Other parts are locating ring FRM130/15,5 of which two are required per unit.
- SNV150+1217K+H217 Manicotto adattatore blocco diviso - SNV150+1217K+H217 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1217K are attached to the shaft using an adapter sleeve H217. Other parts are locating ring FRM150/16,5 of which two are required per unit.
- SNV130+2215K+H315 Manica adattatore blocco diviso - SNV130+2215K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2215K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRM130/12,5 of which two are required per unit.
- SNV150+22217K+H317 Manica adattatore a blocchi split - SNV150+22217K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22217K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRM150/12,5 of which two are required per unit.
- SNV140+2216K+H316 Manicotto adattatore blocco diviso - SNV140+2216K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2216K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRM140/12,5 of which two are required per unit.
- SNV160+21315K+H315 Manicotto adattatore blocco diviso - SNV160+21315K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21315K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRM160/14 of which two are required per unit.
- SNV160+1315K+H315 Manicotto adattatore blocco diviso - SNV160+1315K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1315K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRM160/14 of which two are required per unit.
- SNV140+22216K+H316 Manicotto adattatore blocco diviso - SNV140+22216K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22216K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRM140/12,5 of which two are required per unit.
- SNV160+22218K+H318 Manicotto adattatore a blocchi split - SNV160+22218K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22218K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRM160/12,5 of which two are required per unit.
- SNV150+2217K+H317 Manicotto adattatore blocco diviso - SNV150+2217K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2217K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRM150/12,5 of which two are required per unit.
- SNV160+20218K+H218 Manica adattatore a blocchi split - SNV160+20218K+H218 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20218K are attached to the shaft using an adapter sleeve H218. Other parts are locating ring FRM160/17,5 of which two are required per unit.
- SNV160+22315K+H2315 Manica adattatore blocco diviso - SNV160+22315K+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22315K are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FRM160/5 of which two are required per unit.
- SNV180+2220K+H320 Manica adattatore blocco diviso - SNV180+2220K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2220K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRM180/12 of which two are required per unit.
- SNV180+21317K+H317 Manica adattatore a blocchi split - SNV180+21317K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21317K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRM180/14,5 of which two are required per unit.
- SNV170+22219K+H319 Manica adattatore a blocchi split - SNV170+22219K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22219K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRM170/12,5 of which two are required per unit.
- SNV170+21316K+H316 Manica adattatore a blocchi split - SNV170+21316K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21316K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRM170/14,5 of which two are required per unit.
- SNV160+1218K+H218 Manica adattatore a blocchi split - SNV160+1218K+H218 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1218K are attached to the shaft using an adapter sleeve H218. Other parts are locating ring FRM160/17,5 of which two are required per unit.
- SNV170+2316K+H2316 Manica adattatore a blocchi split - SNV170+2316K+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2316K are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FRM170/5 of which two are required per unit.
- SNV190+20318K+H318 Manica adattatore a blocchi split - SNV190+20318K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20318K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRM190/15,5 of which two are required per unit.
- SNV170+1316K+H316 Manicotto adattatore blocco diviso - SNV170+1316K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1316K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRM170/14,5 of which two are required per unit.
- SNV180+1220K+H220 Manicotto adattatore blocco diviso - SNV180+1220K+H220 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1220K are attached to the shaft using an adapter sleeve H220. Other parts are locating ring FRM180/18 of which two are required per unit.
- SNV170+22316K+H2316 Manica adattatore a blocchi split - SNV170+22316K+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22316K are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FRM170/5 of which two are required per unit.
- SNV170+2219K+H319 Manicotto adattatore blocco diviso - SNV170+2219K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2219K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRM170/12,5 of which two are required per unit.
- SNV180+22317K+H2317 Manica adattatore a blocchi split - SNV180+22317K+H2317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22317K are attached to the shaft using an adapter sleeve H2317. Other parts are locating ring FRM180/5 of which two are required per unit.
- SNV200+22319K+H2319 Manica adattatore a blocchi split - SNV200+22319K+H2319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22319K are attached to the shaft using an adapter sleeve H2319. Other parts are locating ring FRM200/6,5 of which two are required per unit.
- SNV180+2317K+H2317 Manica adattatore a blocchi split - SNV180+2317K+H2317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2317K are attached to the shaft using an adapter sleeve H2317. Other parts are locating ring FRM180/5 of which two are required per unit.
- SNV170+1219K+H219 Manicotto adattatore blocco diviso - SNV170+1219K+H219 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1219K are attached to the shaft using an adapter sleeve H219. Other parts are locating ring FRM170/18 of which two are required per unit.
- SNV180+22220K+H320 Manica adattatore blocco diviso - SNV180+22220K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22220K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRM180/12 of which two are required per unit.
- SNV190+1318K+H318 Manica adattatore a blocchi split - SNV190+1318K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1318K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRM190/15,5 of which two are required per unit.
- SNV200+2319K+H2319 Manica adattatore a blocchi split - SNV200+2319K+H2319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2319K are attached to the shaft using an adapter sleeve H2319. Other parts are locating ring FRM200/6,5 of which two are required per unit.
- SNV180+20220K+H220 Manicotto adattatore blocco diviso - SNV180+20220K+H220 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20220K are attached to the shaft using an adapter sleeve H220. Other parts are locating ring FRM180/18 of which two are required per unit.
- SNV200+21319K+H319 Manica adattatore a blocchi split - SNV200+21319K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21319K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRM200/17,5 of which two are required per unit.
- SNV190+22318K+H2318 Manica adattatore a blocchi split - SNV190+22318K+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22318K are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FRM190/5 of which two are required per unit.
- SNV215+22320K+H2320 Manica adattatore a blocchi split - SNV215+22320K+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22320K are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FRM215/6,5 of which two are required per unit.
- SNV200+23222K+H2322 Manicotto adattatore blocco diviso - SNV200+23222K+H2322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23222K are attached to the shaft using an adapter sleeve H2322. Other parts are locating ring FRM200/5,1 of which two are required per unit.
- SNV190+21318K+H318 Manica adattatore a blocchi split - SNV190+21318K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21318K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRM190/15,5 of which two are required per unit.
- SNV190+2318K+H2318 Manica adattatore a blocchi split - SNV190+2318K+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2318K are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FRM190/5 of which two are required per unit.
- SNV215+2320K+H2320 Manica adattatore a blocchi split - SNV215+2320K+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2320K are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FRM215/6,5 of which two are required per unit.
- SNV230+226K+H3126 Manica adattatore blocco diviso - SNV230+22226K+H3126 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22226K are attached to the shaft using an adapter sleeve H3126. Other parts are locating ring FRM230/13 of which two are required per unit.
- SNV200+1319K+H319 Manica adattatore a blocchi split - SNV200+1319K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1319K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRM200/17,5 of which two are required per unit.
- SNV230+23226K+H2326 Manica adattatore a blocchi split - SNV230+23226K+H2326 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23226K are attached to the shaft using an adapter sleeve H2326. Other parts are locating ring FRM230/5 of which two are required per unit.
- SNV230+20226K+H3026 Manica adattatore a blocchi split - SNV230+20226K+H3026 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20226K are attached to the shaft using an adapter sleeve H3026. Other parts are locating ring FRM230/25 of which two are required per unit.
- SNV215+1320K+H320 Manica adattatore blocco diviso - SNV215+1320K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1320K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRM215/19,5 of which two are required per unit.
- SNV200+1222K+H222 Manicotto adattatore blocco diviso - SNV200+1222K+H222 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1222K are attached to the shaft using an adapter sleeve H222. Other parts are locating ring FRM200/21 of which two are required per unit.
- SNV240+21322K+H322 Manicotto adattatore blocco diviso - SNV240+21322K+H322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21322K are attached to the shaft using an adapter sleeve H322. Other parts are locating ring FRM240/20 of which two are required per unit.
- SNV215+20224K+H3024 Manica adattatore blocco diviso - SNV215+20224K+H3024 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20224K are attached to the shaft using an adapter sleeve H3024. Other parts are locating ring FRM215/23 of which two are required per unit.
- SNV240+22322K+H2322 Manica adattatore blocco diviso - SNV240+22322K+H2322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22322K are attached to the shaft using an adapter sleeve H2322. Other parts are locating ring FRM240/5 of which two are required per unit.
- SNV215+22224K+H3124 Manica adattatore blocco diviso - SNV215+22224K+H3124 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22224K are attached to the shaft using an adapter sleeve H3124. Other parts are locating ring FRM215/14 of which two are required per unit.
- SNV250+23228K+H2328 Manica adattatore a blocchi split - SNV250+23228K+H2328 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23228K are attached to the shaft using an adapter sleeve H2328. Other parts are locating ring FRM250/5 of which two are required per unit.
- SNV200+20222K+H222 Manica adattatore blocco diviso - SNV200+20222K+H222 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20222K are attached to the shaft using an adapter sleeve H222. Other parts are locating ring FRM200/21 of which two are required per unit.
- SNV215+21320K+H320 Manica adattatore blocco diviso - SNV215+21320K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21320K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRM215/19,5 of which two are required per unit.
- SNV200+222K+H322 Manica adattatore blocco diviso - SNV200+22222K+H322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22222K are attached to the shaft using an adapter sleeve H322. Other parts are locating ring FRM200/13,5 of which two are required per unit.
- SNV270+20230K+H30 Manica adattatore blocco diviso - SNV270+20230K+H3030 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20230K are attached to the shaft using an adapter sleeve H3030. Other parts are locating ring FRM270/30,5 of which two are required per unit.
- SNV320+22330K+H2330 Manica adattatore a blocchi split - SNV320+22330K+H2330 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22330K are attached to the shaft using an adapter sleeve H2330. Other parts are locating ring FRM320/5 of which two are required per unit.
- SNV260+22324K+H2324 Manica adattatore blocco diviso - SNV260+22324K+H2324 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22324K are attached to the shaft using an adapter sleeve H2324. Other parts are locating ring FRM260/5 of which two are required per unit.
- SNC305+21305 Foro cilindrico a blocco diviso - SNC305+21305 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21305 with a cylindrical inner ring lying directly on the shaft.
- SNV290+232K+H2332 Manica adattatore a blocchi split - SNV290+23232K+H2332 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23232K are attached to the shaft using an adapter sleeve H2332. Other parts are locating ring FRM290/5 of which two are required per unit.
- SNC305+2305 Foro cilindrico a blocco diviso - SNC305+2305 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2305 with a cylindrical inner ring lying directly on the shaft.
- SNC205+2205 Foro cilindrico a blocco diviso - SNC205+2205 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2205 with a cylindrical inner ring lying directly on the shaft.
- SNC205+1205 Foro cilindrico a blocco diviso - SNC205+1205 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1205 with a cylindrical inner ring lying directly on the shaft.
- SNV280+22326K+H2326 Manica adattatore a blocchi split - SNV280+22326K+H2326 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22326K are attached to the shaft using an adapter sleeve H2326. Other parts are locating ring FRM280/5 of which two are required per unit.
- SNC207+2207 Foro cilindrico a blocco diviso - SNC207+2207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2207 with a cylindrical inner ring lying directly on the shaft.
- SNC207+1207 Foro cilindrico a blocco diviso - SNC207+1207 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1207 with a cylindrical inner ring lying directly on the shaft.
- SNC306+2306 Foro cilindrico a blocco diviso - SNC306+2306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2306 with a cylindrical inner ring lying directly on the shaft.
- SNC307+21307 Foro cilindrico a blocco diviso - SNC307+21307 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21307 with a cylindrical inner ring lying directly on the shaft.
- SNC206+2206 Foro cilindrico a blocco diviso - SNC206+2206 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2206 with a cylindrical inner ring lying directly on the shaft.
- SNC306+1306 Foro cilindrico a blocco diviso - SNC306+1306 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1306 with a cylindrical inner ring lying directly on the shaft.
- SNC305+1305 Foro cilindrico a blocco diviso - SNC305+1305 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1305 with a cylindrical inner ring lying directly on the shaft.
- SNC208+2208 Foro cilindrico a blocco diviso - SNC208+2208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2208 with a cylindrical inner ring lying directly on the shaft.
- SNC208+1208 Foro cilindrico a blocco diviso - SNC208+1208 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1208 with a cylindrical inner ring lying directly on the shaft.
- SNC309+1309 Foro cilindrico a blocco diviso - SNC309+1309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1309 with a cylindrical inner ring lying directly on the shaft.
- SNC309+22309 Foro cilindrico a blocco diviso - SNC309+22309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22309 with a cylindrical inner ring lying directly on the shaft.
- SNC308+21308 Foro cilindrico a blocco diviso - SNC308+21308 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21308 with a cylindrical inner ring lying directly on the shaft.
- SNC309+2309 Foro cilindrico a blocco diviso - SNC309+2309 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2309 with a cylindrical inner ring lying directly on the shaft.
- SNC310+2310 Foro cilindrico a blocco diviso - SNC310+2310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2310 with a cylindrical inner ring lying directly on the shaft.
- SNC209+22209 Foro cilindrico a blocco diviso - SNC209+22209 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22209 with a cylindrical inner ring lying directly on the shaft.
- SNC310+1310 Foro cilindrico a blocco diviso - SNC310+1310 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1310 with a cylindrical inner ring lying directly on the shaft.
- SNC211+2211 Foro cilindrico a blocco diviso - SNC211+2211 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 2211 with a cylindrical inner ring lying directly on the shaft.
- SNC311+21311 Foro cilindrico a blocco diviso - SNC311+21311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 21311 with a cylindrical inner ring lying directly on the shaft.
- SNC311+1311 Foro cilindrico a blocco diviso - SNC311+1311 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 1311 with a cylindrical inner ring lying directly on the shaft.
- SNC214+22214 Foro cilindrico a blocco diviso - SNC214+22214 are manufactured in compliance with DIN EN 1961. The bearing units are based on the split housing design. SNC pillow block housing have bearings 22214 with a cylindrical inner ring lying directly on the shaft.
- SNC619+1319K+H319 Manica adattatore blocco diviso - SNC619+1319K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1319K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FR200x17.5 of which two are required per unit.
- SNC526+226K+H3126 Manica adattatore blocco diviso - SNC526+22226K+H3126 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22226K are attached to the shaft using an adapter sleeve H3126. Other parts are locating ring FR230x13 of which two are required per unit.
- SNC524+23224K+H2324 Manica adattatore blocco diviso - SNC524+23224K+H2324 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23224K are attached to the shaft using an adapter sleeve H2324. Other parts are locating ring FR215x5 of which two are required per unit.
- SNC530+22230K+H3130 Manica adattatore blocco diviso - SNC530+22230K+H3130 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22230K are attached to the shaft using an adapter sleeve H3130. Other parts are locating ring FR270x16.5 of which two are required per unit.
- SNL507+606+2207EKTN9+H307 Manica adattatore blocco diviso - SNL507+606+2207EKTN9+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2207EKTN9 are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRB5.5/72 of which two are required per unit.
- SNL508+607+2307EKTN9+H2307 Manica adattatore blocco diviso - SNL508+607+2307EKTN9+H2307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2307EKTN9 are attached to the shaft using an adapter sleeve H2307. Other parts are locating ring FRB4/80 of which two are required per unit.
- SNL508+607+1208EKTN9+H208 Manica adattatore blocco diviso - SNL508+607+1208EKTN9+H208 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1208EKTN9 are attached to the shaft using an adapter sleeve H208. Other parts are locating ring FRB10.5/80 of which two are required per unit.
- SNL506+605+2206EKTN9+H306 Manica adattatore a blocchi split - SNL506+605+2206EKTN9+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2206EKTN9 are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FRB6/62 of which two are required per unit.
- SNL510+608+2210EKTN9+H310 Manica adattatore a blocchi split - SNL510+608+2210EKTN9+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2210EKTN9 are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRB9/90 of which two are required per unit.
- SNL511+609+21309EK+H309 Manica adattatore a blocchi split - SNL511+609+21309EK+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21309EK are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRB9.5/100 of which two are required per unit.
- SNL510+608+1210EKTN9+H210 Manicotto adattatore blocco diviso - SNL510+608+1210EKTN9+H210 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1210EKTN9 are attached to the shaft using an adapter sleeve H210. Other parts are locating ring FRB10.5/90 of which two are required per unit.
- SNL512+610+1310EKTN9+H310 Manicotto adattatore blocco diviso - SNL512+610+1310EKTN9+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1310EKTN9 are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRB10.5/110 of which two are required per unit.
- SNL512+610+22212EK+H312 Manica adattatore blocco diviso - SNL512+610+22212EK+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22212EK are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRB10/110 of which two are required per unit.
- SNL513+611+21311 EK+H311 Manica adattatore blocco diviso - SNL513+611+21311 EK+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21311 EK are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FRB11/120 of which two are required per unit.
- SNL516+613+2313K+H2313 Manica adattatore a blocchi split - SNL516+613+2313K+H2313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2313K are attached to the shaft using an adapter sleeve H2313. Other parts are locating ring FRB5/140 of which two are required per unit.
- SNL513+611+2311K+H2311 Manica adattatore blocco diviso - SNL513+611+2311K+H2311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2311K are attached to the shaft using an adapter sleeve H2311. Other parts are locating ring FRB4/120 of which two are required per unit.
- SNL513+611+22311EK+H2311 Manica adattatore blocco diviso - SNL513+611+22311EK+H2311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22311EK are attached to the shaft using an adapter sleeve H2311. Other parts are locating ring FRB4/120 of which two are required per unit.
- SNC532+22232K+H3132 Manica adattatore a blocchi split - SNC532+22232K+H3132 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22232K are attached to the shaft using an adapter sleeve H3132. Other parts are locating ring FR290x17 of which two are required per unit.
- SNL515+612+1215K+H215 Manica adattatore blocco diviso - SNL515+612+1215K+H215 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1215K are attached to the shaft using an adapter sleeve H215. Other parts are locating ring FRB15.5/130 of which two are required per unit.
- SNL512+610+C2212KTN9+H312E Manica adattatore blocco diviso - SNL512+610+C2212KTN9+H312E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2212KTN9 are attached to the shaft using an adapter sleeve H312E. Other parts are locating ring FRB10/110 of which two are required per unit.
- SNL515+612+2215EKTN9+H315 Manicotto adattatore blocco diviso - SNL515+612+2215EKTN9+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2215EKTN9 are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRB12.5/130 of which two are required per unit.
- SNL515+612+1312EKTN9+H312 Custodia adattatore blocco diviso - SNL515+612+1312EKTN9+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1312EKTN9 are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRB12.5/130 of which two are required per unit.
- SNL515+612+C2215K+H315E Manica adattatore blocco diviso - SNL515+612+C2215K+H315E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2215K are attached to the shaft using an adapter sleeve H315E. Other parts are locating ring FRB12.5/130 of which two are required per unit.
- SNL516+613+21313EK+H313 Manica adattatore a blocchi split - SNL516+613+21313EK+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21313EK are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRB12.5/140 of which two are required per unit.
- SNL516+613+13EKTN9+H313 Manica adattatore a blocchi split - SNL516+613+1313EKTN9+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1313EKTN9 are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRB12.5/140 of which two are required per unit.
- SNL513+611+C2213KTN9+H313E Manica adattatore a blocchi split - SNL513+611+C2213KTN9+H313E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2213KTN9 are attached to the shaft using an adapter sleeve H313E. Other parts are locating ring FRB10/120 of which two are required per unit.
- SNL518+615+2315K+H2315 Manica adattatore blocco diviso - SNL518+615+2315K+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2315K are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FRB5/160 of which two are required per unit.
- SNL516+613+1216K+H216 Manica adattatore blocco diviso - SNL516+613+1216K+H216 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1216K are attached to the shaft using an adapter sleeve H216. Other parts are locating ring FRB16/140 of which two are required per unit.
- SNL518+615+1315K+H315 Manica adattatore blocco diviso - SNL518+615+1315K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1315K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRB14/160 of which two are required per unit.
- SNL513+611+1213EKTN9+H213 Manicotto adattatore blocco diviso - SNL513+611+1213EKTN9+H213 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1213EKTN9 are attached to the shaft using an adapter sleeve H213. Other parts are locating ring FRB14/120 of which two are required per unit.
- SNL519+616+1219K+H219 Manica adattatore blocco diviso - SNL519+616+1219K+H219 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1219K are attached to the shaft using an adapter sleeve H219. Other parts are locating ring FRB18/170 of which two are required per unit.
- SNL516+613+22313EK+H2313 Manica adattatore a blocchi split - SNL516+613+22313EK+H2313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22313EK are attached to the shaft using an adapter sleeve H2313. Other parts are locating ring FRB5/140 of which two are required per unit.
- SNL518+615+21315EK+H315 Manica adattatore blocco diviso - SNL518+615+21315EK+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21315EK are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRB14/160 of which two are required per unit.
- SNL519+616+1316K+H316 Manica adattatore blocco diviso - SNL519+616+1316K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1316K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRB14.5/170 of which two are required per unit.
- SNL522+619+21319EK+H319 Manica adattatore blocco diviso - SNL522+619+21319EK+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21319EK are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRB17.5/200 of which two are required per unit.
- SNL517+2217K+H317 Manica adattatore a blocchi split - SNL517+2217K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2217K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRB12.5/150 of which two are required per unit.
- SNL519+616+2316K+H2316 Manica adattatore a blocchi split - SNL519+616+2316K+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2316K are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FRB5/170 of which two are required per unit.
- SNL522+619+22319EK+H2319 Manica adattatore blocco diviso - SNL522+619+22319EK+H2319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22319EK are attached to the shaft using an adapter sleeve H2319. Other parts are locating ring FRB6.5/200 of which two are required per unit.
- SNL524+620+1320K+H320 Manica adattatore blocco diviso - SNL524+620+1320K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1320K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRB19.5/215 of which two are required per unit.
- SNL516+613+22216EK+H316 Manica adattatore a blocchi split - SNL516+613+22216EK+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22216EK are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRB12.5/140 of which two are required per unit.
- SNL517+1217K+H217 Manica adattatore a blocchi split - SNL517+1217K+H217 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1217K are attached to the shaft using an adapter sleeve H217. Other parts are locating ring FRB16.5/150 of which two are required per unit.
- SNL519+616+22316EK+H2316 Manica adattatore a blocchi split - SNL519+616+22316EK+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22316EK are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FRB5/170 of which two are required per unit.
- SNL519+616+2219KM+H319 Manica adattatore blocco diviso - SNL519+616+2219KM+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2219KM are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRB12.5/170 of which two are required per unit.
- SNL520+617+22317EK+H2317 Manica adattatore blocco diviso - SNL520+617+22317EK+H2317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22317EK are attached to the shaft using an adapter sleeve H2317. Other parts are locating ring FRB5/180 of which two are required per unit.
- SNL524+620+22320EK+H2320 Manica adattatore blocco diviso - SNL524+620+22320EK+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22320EK are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FRB6.5/215 of which two are required per unit.
- SNL518+615+1218K+H218 Manica adattatore blocco diviso - SNL518+615+1218K+H218 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1218K are attached to the shaft using an adapter sleeve H218. Other parts are locating ring FRB17.5/160 of which two are required per unit.
- SNL519+616+21316EK+H316 Manica adattatore blocco diviso - SNL519+616+21316EK+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21316EK are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRB14.5/170 of which two are required per unit.
- SNL517+C 2217K+H317 Manica adattatore a blocchi split - SNL517+C 2217K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C 2217K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRB12.5/150 of which two are required per unit.
- SNL524+620+23224CCK/W33+H2324 Manica adattatore a blocchi split - SNL524+620+23224CCK/W33+H2324 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23224CCK/W33 are attached to the shaft using an adapter sleeve H2324. Other parts are locating ring FRB5/215 of which two are required per unit.
- SNL518+615+22315EK+H2315 Manica adattatore blocco diviso - SNL518+615+22315EK+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22315EK are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FRB5/160 of which two are required per unit.
- SNL520+617+1220K+H220 Manica adattatore blocco diviso - SNL520+617+1220K+H220 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1220K are attached to the shaft using an adapter sleeve H220. Other parts are locating ring FRB18/180 of which two are required per unit.
- SNL520+617+23220CCK/W33+H2320 Manica adattatore a blocchi split - SNL520+617+23220CCK/W33+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23220CCK/W33 are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FRB4.85/180 of which two are required per unit.
- SNL522+619+1319K+H319 Manica adattatore blocco diviso - SNL522+619+1319K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1319K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRB17.5/200 of which two are required per unit.
- SNL520+617+1317K+H317 Manica adattatore blocco diviso - SNL520+617+1317K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1317K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRB14.5/180 of which two are required per unit.
- SNL524+620+1224KM+H3024 Manica adattatore blocco diviso - SNL524+620+1224KM+H3024 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1224KM are attached to the shaft using an adapter sleeve H3024. Other parts are locating ring FRB22/215 of which two are required per unit.
- SNL517+22217EK+H317 Manica adattatore a blocchi split - SNL517+22217EK+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22217EK are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRB12.5/150 of which two are required per unit.
- SNL528+23228CCK/W33+H2328 Manica adattatore a blocchi split - SNL528+23228CCK/W33+H2328 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23228CCK/W33 are attached to the shaft using an adapter sleeve H2328. Other parts are locating ring FRB5/250 of which two are required per unit.
- SNL520+617+C2220K+H320E Manica adattatore a blocchi split - SNL520+617+C2220K+H320E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2220K are attached to the shaft using an adapter sleeve H320E. Other parts are locating ring FRB12/180 of which two are required per unit.
- SNL518+615+22218EK+H318 Manica adattatore a blocchi split - SNL518+615+22218EK+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22218EK are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRB12.5/160 of which two are required per unit.
- SNL524+620+C2320K+H2320 Manica adattatore a blocchi split - SNL524+620+C2320K+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2320K are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FRB6.5/215 of which two are required per unit.
- SNL528+228+2CS5K/VT143+H3128L Manicotto adattatore blocco diviso - SNL528+22228+2CS5K/VT143+H3128L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22228-2CS5K/VT143 are attached to the shaft using an adapter sleeve H3128L. Other parts are locating ring FRB15/250 of which two are required per unit.
- SNL522+619+222EK+H322 Manica adattatore blocco diviso - SNL522+619+22222EK+H322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22222EK are attached to the shaft using an adapter sleeve H322. Other parts are locating ring FRB13.5/200 of which two are required per unit.
- SNL524+620+21320EK+H320 Manica adattatore blocco diviso - SNL524+620+21320EK+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21320EK are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRB19.5/215 of which two are required per unit.
- SNL528+C2228K+H3128L Manicotto adattatore blocco diviso - SNL528+C2228K+H3128L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2228K are attached to the shaft using an adapter sleeve H3128L. Other parts are locating ring FRB15/250 of which two are required per unit.
- SNL522+619+22KM+H322 Manica adattatore blocco diviso - SNL522+619+2222KM+H322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2222KM are attached to the shaft using an adapter sleeve H322. Other parts are locating ring FRB13.5/200 of which two are required per unit.
- SNL522+619+23222CCK/W33+H2322 Manica adattatore a blocchi split - SNL522+619+23222CCK/W33+H2322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23222CCK/W33 are attached to the shaft using an adapter sleeve H2322. Other parts are locating ring FRB5.1/200 of which two are required per unit.
- SNL526+23226+2CS5K/VT143+H2326L Manicotto adattatore blocco diviso - SNL526+23226+2CS5K/VT143+H2326L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23226-2CS5K/VT143 are attached to the shaft using an adapter sleeve H2326L. Other parts are locating ring FRB5/230 of which two are required per unit.
- SNL526+23226CCK/W33+H2326 Manica adattatore a blocchi split - SNL526+23226CCK/W33+H2326 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23226CCK/W33 are attached to the shaft using an adapter sleeve H2326. Other parts are locating ring FRB5/230 of which two are required per unit.
- SNL522+619+C22K+H322E Manica adattatore blocco diviso - SNL522+619+C2222K+H322E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2222K are attached to the shaft using an adapter sleeve H322E. Other parts are locating ring FRB13.5/200 of which two are required per unit.
- SNL518+615+2218K+H318 Manica adattatore a blocchi split - SNL518+615+2218K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2218K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRB12.5/160 of which two are required per unit.
- SNL520+617+2220KM+H320 Manica adattatore blocco diviso - SNL520+617+2220KM+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2220KM are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRB12/180 of which two are required per unit.
- SNL524+620+C3224K+H2324L Manica adattatore a blocchi split - SNL524+620+C3224K+H2324L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C3224K are attached to the shaft using an adapter sleeve H2324L. Other parts are locating ring FRB5/215 of which two are required per unit.
- SNL526+226EK+H3126 Manica adattatore blocco diviso - SNL526+22226EK+H3126 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22226EK are attached to the shaft using an adapter sleeve H3126. Other parts are locating ring FRB13/230 of which two are required per unit.
- SNL528+228CCK/W33+H3128 Manica adattatore a blocchi split - SNL528+22228CCK/W33+H3128 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22228CCK/W33 are attached to the shaft using an adapter sleeve H3128. Other parts are locating ring FRB15/250 of which two are required per unit.
- SNL522+619+1222K+H222 Manica adattatore blocco diviso - SNL522+619+1222K+H222 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1222K are attached to the shaft using an adapter sleeve H222. Other parts are locating ring FRB21/200 of which two are required per unit.
- SNV052+22205K+H305 Manica adattatore blocco diviso - SNV052+22205K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22205K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FRM52/4,5 of which two are required per unit.
- SNV052+20205K+H205 Manica adattatore blocco diviso - SNV052+20205K+H205 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20205K are attached to the shaft using an adapter sleeve H205. Other parts are locating ring FRM52/6 of which two are required per unit.
- SNV062+1206K+H206 Manicotto adattatore blocco diviso - SNV062+1206K+H206 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1206K are attached to the shaft using an adapter sleeve H206. Other parts are locating ring FRM62/7 of which two are required per unit.
- SNL524+620+22224EK+H3124 Manica adattatore blocco diviso - SNL524+620+22224EK+H3124 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22224EK are attached to the shaft using an adapter sleeve H3124. Other parts are locating ring FRB14/215 of which two are required per unit.
- SNL532+232CCK/W33+H2332 Custodia adattatore a blocchi split - SNL532+23232CCK/W33+H2332 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23232CCK/W33 are attached to the shaft using an adapter sleeve H2332. Other parts are locating ring FRB5/290 of which two are required per unit.
- SNL530+C2230K+H3130L Manica adattatore a blocchi split - SNL530+C2230K+H3130L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2230K are attached to the shaft using an adapter sleeve H3130L. Other parts are locating ring FRB16.5/270 of which two are required per unit.
- SNL532+C32K+H2332L Manica adattatore a blocchi split - SNL532+C3232K+H2332L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C3232K are attached to the shaft using an adapter sleeve H2332L. Other parts are locating ring FRB5/290 of which two are required per unit.
- SNL526+C2226K+H3126L Manica adattatore a blocchi split - SNL526+C2226K+H3126L are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2226K are attached to the shaft using an adapter sleeve H3126L. Other parts are locating ring FRB13/230 of which two are required per unit.
- SNV072+1207K+H207 Manica adattatore blocco diviso - SNV072+1207K+H207 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1207K are attached to the shaft using an adapter sleeve H207. Other parts are locating ring FRM72/8 of which two are required per unit.
- SNL532+22232+2CS5K/VT143+H3132 Manicotto adattatore blocco diviso - SNL532+22232+2CS5K/VT143+H3132 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22232-2CS5K/VT143 are attached to the shaft using an adapter sleeve H3132. Other parts are locating ring FRB17/290 of which two are required per unit.
- SNV072+22207K+H307 Manica adattatore blocco diviso - SNV072+22207K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22207K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRM72/5 of which two are required per unit.
- SNV072+2306K+H2306 Manica adattatore a blocchi split - SNV072+2306K+H2306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2306K are attached to the shaft using an adapter sleeve H2306. Other parts are locating ring FRM72/3 of which two are required per unit.
- SNV052+2205K+H305 Manica adattatore blocco diviso - SNV052+2205K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2205K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FRM52/4,5 of which two are required per unit.
- SNL530+23230CCK/W33+H2330 Manica adattatore a blocchi split - SNL530+23230CCK/W33+H2330 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23230CCK/W33 are attached to the shaft using an adapter sleeve H2330. Other parts are locating ring FRB5/270 of which two are required per unit.
- SNV062+2305K+H2305 Manica adattatore blocco diviso - SNV062+2305K+H2305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2305K are attached to the shaft using an adapter sleeve H2305. Other parts are locating ring FRM62/3 of which two are required per unit.
- SNV052+1205K+H205 Manica adattatore blocco diviso - SNV052+1205K+H205 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1205K are attached to the shaft using an adapter sleeve H205. Other parts are locating ring FRM52/6 of which two are required per unit.
- SNL528+23228+2CS5K/VT143+H2328 Manicotto adattatore blocco diviso - SNL528+23228+2CS5K/VT143+H2328 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23228-2CS5K/VT143 are attached to the shaft using an adapter sleeve H2328. Other parts are locating ring FRB5/250 of which two are required per unit.
- SNV080+1208K+H208 Manica adattatore blocco diviso - SNV080+1208K+H208 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1208K are attached to the shaft using an adapter sleeve H208. Other parts are locating ring FRM80/10,5 of which two are required per unit.
- SNV080+2208K+H308 Manica adattatore blocco diviso - SNV080+2208K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2208K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRM80/8 of which two are required per unit.
- SNV062+22206K+H306 Manica adattatore blocco diviso - SNV062+22206K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22206K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FRM62/5 of which two are required per unit.
- SNL530+22230CCK/W33+H3130 Manicotto adattatore blocco diviso - SNL530+22230CCK/W33+H3130 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22230CCK/W33 are attached to the shaft using an adapter sleeve H3130. Other parts are locating ring FRB16.5/270 of which two are required per unit.
- SNL532+22232CCK/W33+H3132 Manicotto adattatore a blocchi split - SNL532+22232CCK/W33+H3132 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22232CCK/W33 are attached to the shaft using an adapter sleeve H3132. Other parts are locating ring FRB17/290 of which two are required per unit.
- SNV072+20207K+H207 Manica adattatore blocco diviso - SNV072+20207K+H207 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20207K are attached to the shaft using an adapter sleeve H207. Other parts are locating ring FRM72/8 of which two are required per unit.
- SNV062+1305K+H305 Manica adattatore blocco diviso - SNV062+1305K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1305K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FRM62/6,5 of which two are required per unit.
- SNV085+22209K+H309 Manica adattatore blocco diviso - SNV085+22209K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22209K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRM85/4 of which two are required per unit.
- SNL530+22230+2CS5K/VT143+H3130 Manicotto adattatore blocco diviso - SNL530+22230+2CS5K/VT143+H3130 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22230-2CS5K/VT143 are attached to the shaft using an adapter sleeve H3130. Other parts are locating ring FRB16.5/270 of which two are required per unit.
- SNV062+20206K+H206 Manica adattatore a blocchi split - SNV062+20206K+H206 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20206K are attached to the shaft using an adapter sleeve H206. Other parts are locating ring FRM62/7 of which two are required per unit.
- SNV072+1306K+H306 Manica adattatore blocco diviso - SNV072+1306K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1306K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FRM72/7 of which two are required per unit.
- SNV090+1308K+H308 Manica adattatore blocco diviso - SNV090+1308K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1308K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRM90/9 of which two are required per unit.
- SNV090+21308K+H308 Manica adattatore blocco diviso - SNV090+21308K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21308K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRM90/9 of which two are required per unit.
- SNV090+22308K+H2308 Manica adattatore a blocchi split - SNV090+22308K+H2308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22308K are attached to the shaft using an adapter sleeve H2308. Other parts are locating ring FRM90/4 of which two are required per unit.
- SNV090+2308K+H2308 Manica adattatore a blocchi split - SNV090+2308K+H2308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2308K are attached to the shaft using an adapter sleeve H2308. Other parts are locating ring FRM90/4 of which two are required per unit.
- SNV090+1210K+H210 Manica adattatore blocco diviso - SNV090+1210K+H210 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1210K are attached to the shaft using an adapter sleeve H210. Other parts are locating ring FRM90/10,5 of which two are required per unit.
- SNV062+2206K+H306 Manica adattatore blocco diviso - SNV062+2206K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2206K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FRM62/5 of which two are required per unit.
- SNV080+2307K+H2307 Manica adattatore blocco diviso - SNV080+2307K+H2307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2307K are attached to the shaft using an adapter sleeve H2307. Other parts are locating ring FRM80/4 of which two are required per unit.
- SNV085+20209K+H209 Manica adattatore blocco diviso - SNV085+20209K+H209 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20209K are attached to the shaft using an adapter sleeve H209. Other parts are locating ring FRM85/6 of which two are required per unit.
- SNV100+22309K+H2309 Manica adattatore blocco diviso - SNV100+22309K+H2309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22309K are attached to the shaft using an adapter sleeve H2309. Other parts are locating ring FRM100/4 of which two are required per unit.
- SNV085+1209K+H209 Manica adattatore a blocchi split - SNV085+1209K+H209 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1209K are attached to the shaft using an adapter sleeve H209. Other parts are locating ring FRM85/6 of which two are required per unit.
- SNV072+2207K+H307 Manica adattatore blocco diviso - SNV072+2207K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2207K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRM72/5 of which two are required per unit.
- SNV090+20210K+H210 Manica adattatore blocco diviso - SNV090+20210K+H210 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20210K are attached to the shaft using an adapter sleeve H210. Other parts are locating ring FRM90/10,5 of which two are required per unit.
- SNV110+12K+H212 Manicotto adattatore blocco diviso - SNV110+1212K+H212 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1212K are attached to the shaft using an adapter sleeve H212. Other parts are locating ring FRM110/13 of which two are required per unit.
- SNV090+2210K+H310 Manica adattatore blocco diviso - SNV090+2210K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2210K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRM90/9 of which two are required per unit.
- SNV100+2309K+H2309 Manica adattatore blocco diviso - SNV100+2309K+H2309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2309K are attached to the shaft using an adapter sleeve H2309. Other parts are locating ring FRM100/4 of which two are required per unit.
- SNV100+21309K+H309 Manica adattatore a blocchi split - SNV100+21309K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21309K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRM100/9,5 of which two are required per unit.
- SNV110+2212K+H312 Manicotto adattatore blocco diviso - SNV110+2212K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2212K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRM110/10 of which two are required per unit.
- SNV090+22210K+H310 Manica adattatore blocco diviso - SNV090+22210K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22210K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRM90/9 of which two are required per unit.
- SNV100+2211 K+H311 Manicotto adattatore blocco diviso - SNV100+2211 K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2211 K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FRM100/9,5 of which two are required per unit.
- SNV100+22211K+H311 Manica adattatore blocco diviso - SNV100+22211K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22211K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FRM100/9,5 of which two are required per unit.
- SNV110+1310K+H310 Manicotto adattatore blocco diviso - SNV110+1310K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1310K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRM110/10,5 of which two are required per unit.
- SNV120+20213K+H213 Manicotto adattatore blocco diviso - SNV120+20213K+H213 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20213K are attached to the shaft using an adapter sleeve H213. Other parts are locating ring FRM120/14 of which two are required per unit.
- SNV110+2310K+H2310 Manicotto adattatore blocco diviso - SNV110+2310K+H2310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2310K are attached to the shaft using an adapter sleeve H2310. Other parts are locating ring FRM110/4 of which two are required per unit.
- SNV120+2311K+H2311 Manicotto adattatore blocco diviso - SNV120+2311K+H2311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2311K are attached to the shaft using an adapter sleeve H2311. Other parts are locating ring FRM120/4 of which two are required per unit.
- SNV110+22212K+H312 Manica adattatore blocco diviso - SNV110+22212K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22212K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRM110/10 of which two are required per unit.
- SNV130+22312K+H2312 Manica adattatore blocco diviso - SNV130+22312K+H2312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22312K are attached to the shaft using an adapter sleeve H2312. Other parts are locating ring FRM130/5 of which two are required per unit.
- SNV120+1213K+H213 Manicotto adattatore blocco diviso - SNV120+1213K+H213 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1213K are attached to the shaft using an adapter sleeve H213. Other parts are locating ring FRM120/14 of which two are required per unit.
- SNV120+1311K+H311 Manicotto adattatore blocco diviso - SNV120+1311K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1311K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FRM120/11 of which two are required per unit.
- SNV130+2312K+H2312 Manica adattatore blocco diviso - SNV130+2312K+H2312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2312K are attached to the shaft using an adapter sleeve H2312. Other parts are locating ring FRM130/5 of which two are required per unit.
- SNV120+22213K+H313 Manicotto adattatore blocco diviso - SNV120+22213K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22213K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRM120/10 of which two are required per unit.
- SNV130+22215K+H315 Manica adattatore blocco diviso - SNV130+22215K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22215K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRM130/12,5 of which two are required per unit.
- SNV140+22313K+H2313 Manica adattatore a blocchi split - SNV140+22313K+H2313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22313K are attached to the shaft using an adapter sleeve H2313. Other parts are locating ring FRM140/5 of which two are required per unit.
- SNV130+20215K+H215 Manica adattatore blocco diviso - SNV130+20215K+H215 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20215K are attached to the shaft using an adapter sleeve H215. Other parts are locating ring FRM130/15,5 of which two are required per unit.
- SNV140+20216K+H216 Manicotto adattatore blocco diviso - SNV140+20216K+H216 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20216K are attached to the shaft using an adapter sleeve H216. Other parts are locating ring FRM140/16 of which two are required per unit.
- SNV150+20217K+H217 Manicotto adattatore blocco diviso - SNV150+20217K+H217 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 20217K are attached to the shaft using an adapter sleeve H217. Other parts are locating ring FRM150/16,5 of which two are required per unit.
- SNV160+2315K+H2315 Manica adattatore a blocchi split - SNV160+2315K+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2315K are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FRM160/5 of which two are required per unit.
- SNV160+2218K+H318 Manica adattatore a blocchi split - SNV160+2218K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2218K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FRM160/12,5 of which two are required per unit.
- SNV160+23218K+H2318 Manica adattatore a blocchi split - SNV160+23218K+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23218K are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FRM160/6,3 of which two are required per unit.
- SNV180+1317K+H317 Manicotto adattatore blocco diviso - SNV180+1317K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1317K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRM180/14,5 of which two are required per unit.
- SNV180+23220K+H2320 Manica adattatore a blocchi split - SNV180+23220K+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23220K are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FRM180/4,85 of which two are required per unit.
- SNC505+22205K+H305 Manica adattatore blocco diviso - SNC505+22205K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22205K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FR52x3.5 of which two are required per unit.
- SNC605+1305K+H305 Manica adattatore blocco diviso - SNC605+1305K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1305K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FR62x7.5 of which two are required per unit.
- SNC605+21305K+H305 Manica adattatore blocco diviso - SNC605+21305K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21305K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FR62x7.5 of which two are required per unit.
- SNC606+2306K+H2306 Manica adattatore blocco diviso - SNC606+2306K+H2306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2306K are attached to the shaft using an adapter sleeve H2306. Other parts are locating ring FR72x3.5 of which two are required per unit.
- SNC606+1306K+H306 Manica adattatore a blocchi split - SNC606+1306K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1306K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FR72x7.5 of which two are required per unit.
- SNC507+22207K+H307 Manica adattatore blocco diviso - SNC507+22207K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22207K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FR72x5.5 of which two are required per unit.
- SNC508+2208K+H308 Manica adattatore blocco diviso - SNC508+2208K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2208K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FR80x8 of which two are required per unit.
- SNC607+21307K+H307 Manica adattatore blocco diviso - SNC607+21307K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21307K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FR80x8 of which two are required per unit.
- SNC509+1209K+H209 Manica adattatore blocco diviso - SNC509+1209K+H209 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1209K are attached to the shaft using an adapter sleeve H209. Other parts are locating ring FR85x5.5 of which two are required per unit.
- SNC509+22209K+H309 Manica adattatore blocco diviso - SNC509+22209K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22209K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FR85x3.5 of which two are required per unit.
- SNC608+1308K+H308 Manica adattatore blocco diviso - SNC608+1308K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1308K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FR90x9 of which two are required per unit.
- SNC609+21309K+H309 Manica adattatore blocco diviso - SNC609+21309K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21309K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FR100x9.5 of which two are required per unit.
- SNC607+2307K+H2307 Manica adattatore blocco diviso - SNC607+2307K+H2307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2307K are attached to the shaft using an adapter sleeve H2307. Other parts are locating ring FR80x4 of which two are required per unit.
- SNC610+21310K+H310 Manica adattatore a blocchi split - SNC610+21310K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21310K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FR110x10.5 of which two are required per unit.
- SNC510+2210K+H310 Manica adattatore blocco diviso - SNC510+2210K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2210K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FR90x9 of which two are required per unit.
- SNC608+2308K+H2308 Manica adattatore a blocchi split - SNC608+2308K+H2308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2308K are attached to the shaft using an adapter sleeve H2308. Other parts are locating ring FR90x4 of which two are required per unit.
- SNC510+22210K+H310 Manica adattatore blocco diviso - SNC510+22210K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22210K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FR90x9 of which two are required per unit.
- SNC608+22308K+H2308 Manica adattatore blocco diviso - SNC608+22308K+H2308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22308K are attached to the shaft using an adapter sleeve H2308. Other parts are locating ring FR90x4 of which two are required per unit.
- SNC511+1211K+H211 Manica adattatore blocco diviso - SNC511+1211K+H211 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1211K are attached to the shaft using an adapter sleeve H211. Other parts are locating ring FR100x11.5 of which two are required per unit.
- SNC609+22309K+H2309 Manica adattatore blocco diviso - SNC609+22309K+H2309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22309K are attached to the shaft using an adapter sleeve H2309. Other parts are locating ring FR100x4 of which two are required per unit.
- SNC610+2310K+H2310 Manica adattatore a blocchi split - SNC610+2310K+H2310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2310K are attached to the shaft using an adapter sleeve H2310. Other parts are locating ring FR110x4 of which two are required per unit.
- SNC611+1311K+H311 Manica adattatore blocco diviso - SNC611+1311K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1311K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FR120x11 of which two are required per unit.
- SNC609+2309K+H2309 Manica adattatore blocco diviso - SNC609+2309K+H2309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2309K are attached to the shaft using an adapter sleeve H2309. Other parts are locating ring FR100x4 of which two are required per unit.
- SNC613+1313K+H313 Manicotto adattatore blocco diviso - SNC613+1313K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1313K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FR140x12.5 of which two are required per unit.
- SNC609+1309K+H309 Manica adattatore blocco diviso - SNC609+1309K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1309K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FR100x9.5 of which two are required per unit.
- SNC515+2215K+H315 Manica adattatore blocco diviso - SNC515+2215K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2215K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FR130x12.5 of which two are required per unit.
- SNC610+1310K+H310 Manica adattatore blocco diviso - SNC610+1310K+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1310K are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FR110x10.5 of which two are required per unit.
- SNC612+22312K+H2312 Manica adattatore blocco diviso - SNC612+22312K+H2312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22312K are attached to the shaft using an adapter sleeve H2312. Other parts are locating ring FR130x5 of which two are required per unit.
- SNC516+1216K+H216 Manica adattatore blocco diviso - SNC516+1216K+H216 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1216K are attached to the shaft using an adapter sleeve H216. Other parts are locating ring FR140x16 of which two are required per unit.
- SNC513+22213K+H313 Manica adattatore blocco diviso - SNC513+22213K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22213K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FR120x10 of which two are required per unit.
- SNC510+1210K+H210 Manica adattatore blocco diviso - SNC510+1210K+H210 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1210K are attached to the shaft using an adapter sleeve H210. Other parts are locating ring FR90x10.5 of which two are required per unit.
- SNC515+1215K+H215 Manica adattatore blocco diviso - SNC515+1215K+H215 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1215K are attached to the shaft using an adapter sleeve H215. Other parts are locating ring FR130x15.5 of which two are required per unit.
- SNC613+21313K+H313 Manica adattatore blocco diviso - SNC613+21313K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21313K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FR140x12.5 of which two are required per unit.
- SNC511+2211K+H311 Manica adattatore blocco diviso - SNC511+2211K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2211K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FR100x9.5 of which two are required per unit.
- SNC615+22315K+H2315 Manica adattatore blocco diviso - SNC615+22315K+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22315K are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FR160x5 of which two are required per unit.
- SNC615+2315K+H2315 Manica adattatore blocco diviso - SNC615+2315K+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2315K are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FR160x5 of which two are required per unit.
- SNC512+2212K+H312 Manica adattatore blocco diviso - SNC512+2212K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2212K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FR110x10 of which two are required per unit.
- SNC611+22311K+H2311 Manica adattatore blocco diviso - SNC611+22311K+H2311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22311K are attached to the shaft using an adapter sleeve H2311. Other parts are locating ring FR120x4 of which two are required per unit.
- SNC512+22212K+H312 Manica adattatore blocco diviso - SNC512+22212K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22212K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FR110x10 of which two are required per unit.
- SNC612+1312K+H312 Manica adattatore blocco diviso - SNC612+1312K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1312K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FR130x12.5 of which two are required per unit.
- SNC613+22313K+H2313 Manica adattatore blocco diviso - SNC613+22313K+H2313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22313K are attached to the shaft using an adapter sleeve H2313. Other parts are locating ring FR140x5 of which two are required per unit.
- SNC513+2213K+H313 Manica adattatore a blocchi split - SNC513+2213K+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2213K are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FR120x10 of which two are required per unit.
- SNC615+21315K+H315 Manica adattatore blocco diviso - SNC615+21315K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21315K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FR160x14 of which two are required per unit.
- SNC613+2313K+H2313 Manica adattatore a blocchi split - SNC613+2313K+H2313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2313K are attached to the shaft using an adapter sleeve H2313. Other parts are locating ring FR140x5 of which two are required per unit.
- SNC615+1315K+H315 Manica adattatore blocco diviso - SNC615+1315K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1315K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FR160x14 of which two are required per unit.
- SNC516+2216K+H316 Manicotto adattatore blocco diviso - SNC516+2216K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2216K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FR140x12.5 of which two are required per unit.
- SNC618+21318K+H318 Manica adattatore a blocchi split - SNC618+21318K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21318K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FR190x15.5 of which two are required per unit.
- SNC513+1213K+H213 Manica adattatore a blocchi split - SNC513+1213K+H213 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1213K are attached to the shaft using an adapter sleeve H213. Other parts are locating ring FR120x14 of which two are required per unit.
- SNC611+21311K+H311 Manica adattatore blocco diviso - SNC611+21311K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21311K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FR120x11 of which two are required per unit.
- SNC517+1217K+H217 Manica adattatore a blocchi split - SNC517+1217K+H217 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1217K are attached to the shaft using an adapter sleeve H217. Other parts are locating ring FR150x16.5 of which two are required per unit.
- SNC616+1316K+H316 Manica adattatore a blocchi split - SNC616+1316K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1316K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FR170x14.5 of which two are required per unit.
- SNC619+21319K+H319 Manica adattatore blocco diviso - SNC619+21319K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21319K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FR200x17.5 of which two are required per unit.
- SNC617+2317K+H2317 Manica adattatore a blocchi split - SNC617+2317K+H2317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2317K are attached to the shaft using an adapter sleeve H2317. Other parts are locating ring FR180x5 of which two are required per unit.
- SNC616+21316K+H316 Manica adattatore a blocchi split - SNC616+21316K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21316K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FR170x14.5 of which two are required per unit.
- SNC515+22215K+H315 Manica adattatore blocco diviso - SNC515+22215K+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22215K are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FR130x12.5 of which two are required per unit.
- SNC520+23220K+H2320 Manica adattatore a blocchi split - SNC520+23220K+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23220K are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FR180x4.85 of which two are required per unit.
- SNC516+22216K+H316 Manica adattatore a blocchi split - SNC516+22216K+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22216K are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FR140x12.5 of which two are required per unit.
- SNC517+22217K+H317 Manica adattatore a blocchi split - SNC517+22217K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22217K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FR150x12.5 of which two are required per unit.
- SNC617+22317K+H2317 Manica adattatore a blocchi split - SNC617+22317K+H2317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22317K are attached to the shaft using an adapter sleeve H2317. Other parts are locating ring FR180x5 of which two are required per unit.
- SNC517+2217K+H317 Manica adattatore a blocchi split - SNC517+2217K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2217K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FR150x12.5 of which two are required per unit.
- SNC616+22316K+H2316 Manica adattatore blocco diviso - SNC616+22316K+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22316K are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FR170x5 of which two are required per unit.
- SNC620+1320K+H320 Manica adattatore blocco diviso - SNC620+1320K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1320K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FR215x19.5 of which two are required per unit.
- SNC618+22318K+H2318 Manica adattatore a blocchi split - SNC618+22318K+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22318K are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FR190x5 of which two are required per unit.
- SNC518+22218K+H318 Manica adattatore a blocchi split - SNC518+22218K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22218K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FR160x12.5 of which two are required per unit.
- SNC518+2218K+H318 Manica adattatore a blocchi split - SNC518+2218K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2218K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FR160x12.5 of which two are required per unit.
- SNC522+1222K+H222 Manica adattatore blocco diviso - SNC522+1222K+H222 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1222K are attached to the shaft using an adapter sleeve H222. Other parts are locating ring FR200x21 of which two are required per unit.
- SNC519+1219K+H219 Manica adattatore blocco diviso - SNC519+1219K+H219 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1219K are attached to the shaft using an adapter sleeve H219. Other parts are locating ring FR170x18 of which two are required per unit.
- SNC518+23218K+H2318 Manica adattatore a blocchi split - SNC518+23218K+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23218K are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FR160x6.25 of which two are required per unit.
- SNC616+2316K+H2316 Manica adattatore a blocchi split - SNC616+2316K+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2316K are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FR170x5 of which two are required per unit.
- SNC519+2219K+H319 Manica adattatore blocco diviso - SNC519+2219K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2219K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FR170x12.5 of which two are required per unit.
- SNC618+2318K+H2318 Manica adattatore a blocchi split - SNC618+2318K+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2318K are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FR190x5 of which two are required per unit.
- SNC519+22219K+H319 Manica adattatore blocco diviso - SNC519+22219K+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22219K are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FR170x12.5 of which two are required per unit.
- SNC526+23226K+H2326 Manica adattatore a blocchi split - SNC526+23226K+H2326 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23226K are attached to the shaft using an adapter sleeve H2326. Other parts are locating ring FR230x5 of which two are required per unit.
- SNC620+21320K+H320 Manica adattatore a blocchi split - SNC620+21320K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21320K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FR215x19.5 of which two are required per unit.
- SNC518+1218K+H218 Manica adattatore a blocchi split - SNC518+1218K+H218 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1218K are attached to the shaft using an adapter sleeve H218. Other parts are locating ring FR160x17.5 of which two are required per unit.
- SNC530+23230K+H2330 Manica adattatore a blocchi split - SNC530+23230K+H2330 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23230K are attached to the shaft using an adapter sleeve H2330. Other parts are locating ring FR270x5 of which two are required per unit.
- SNC617+21317K+H317 Manica adattatore a blocchi split - SNC617+21317K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21317K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FR180x14.5 of which two are required per unit.
- SNC617+1317K+H317 Manica adattatore a blocchi split - SNC617+1317K+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1317K are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FR180x14.5 of which two are required per unit.
- SNC528+23228K+H2328 Manica adattatore a blocchi split - SNC528+23228K+H2328 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23228K are attached to the shaft using an adapter sleeve H2328. Other parts are locating ring FR250x5 of which two are required per unit.
- SNC520+2220K+H320 Manicotto adattatore blocco diviso - SNC520+2220K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2220K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FR180x12 of which two are required per unit.
- SNC532+232K+H2332 Manica adattatore a blocchi split - SNC532+23232K+H2332 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23232K are attached to the shaft using an adapter sleeve H2332. Other parts are locating ring FR290x5 of which two are required per unit.
- SNC618+1318K+H318 Manica adattatore a blocchi split - SNC618+1318K+H318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1318K are attached to the shaft using an adapter sleeve H318. Other parts are locating ring FR190x15.5 of which two are required per unit.
- SNC520+22220K+H320 Manica adattatore blocco diviso - SNC520+22220K+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22220K are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FR180x12 of which two are required per unit.
- SNC522+222K+H322 Manica adattatore blocco diviso - SNC522+22222K+H322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22222K are attached to the shaft using an adapter sleeve H322. Other parts are locating ring FR200x13.5 of which two are required per unit.
- SNC619+22319K+H2319 Manica adattatore blocco diviso - SNC619+22319K+H2319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22319K are attached to the shaft using an adapter sleeve H2319. Other parts are locating ring FR200x6.5 of which two are required per unit.
- SNC520+1220K+H220 Manica adattatore blocco diviso - SNC520+1220K+H220 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1220K are attached to the shaft using an adapter sleeve H220. Other parts are locating ring FR180x18 of which two are required per unit.
- SNL505+1205EKTN9+H205 Manicotto adattatore blocco diviso - SNL505+1205EKTN9+H205 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1205EKTN9 are attached to the shaft using an adapter sleeve H205. Other parts are locating ring FRB5/52 of which two are required per unit.
- SNL507+606+22207EK+H307 Manica adattatore blocco diviso - SNL507+606+22207EK+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22207EK are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRB5.5/72 of which two are required per unit.
- SNC528+228K+H3128 Manica adattatore blocco diviso - SNC528+22228K+H3128 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22228K are attached to the shaft using an adapter sleeve H3128. Other parts are locating ring FR250x15 of which two are required per unit.
- SNC522+23222K+H2322 Manica adattatore blocco diviso - SNC522+23222K+H2322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23222K are attached to the shaft using an adapter sleeve H2322. Other parts are locating ring FR200x5.1 of which two are required per unit.
- SNL508+607+C2207KTN9+H307E Manica adattatore a blocchi split - SNL508+607+C2207KTN9+H307E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2207KTN9 are attached to the shaft using an adapter sleeve H307E. Other parts are locating ring FRB5.5/72 of which two are required per unit.
- SNL507+606+1207EKTN9+H207 Manica adattatore blocco diviso - SNL507+606+1207EKTN9+H207 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1207EKTN9 are attached to the shaft using an adapter sleeve H207. Other parts are locating ring FRB8.5/72 of which two are required per unit.
- SNC524+22224K+H3124 Manica adattatore blocco diviso - SNC524+22224K+H3124 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22224K are attached to the shaft using an adapter sleeve H3124. Other parts are locating ring FR215x14 of which two are required per unit.
- SNL505+22205EK+H305 Manica adattatore blocco diviso - SNL505+22205EK+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22205EK are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FRB3.5/52 of which two are required per unit.
- SNC522+22K+H322 Manica adattatore blocco diviso - SNC522+2222K+H322 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2222K are attached to the shaft using an adapter sleeve H322. Other parts are locating ring FR200x13.5 of which two are required per unit.
- SNL505+2205EKTN9+H305 Manicotto adattatore blocco diviso - SNL505+2205EKTN9+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2205EKTN9 are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FRB3.5/52 of which two are required per unit.
- SNC620+22320K+H2320 Manica adattatore blocco diviso - SNC620+22320K+H2320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22320K are attached to the shaft using an adapter sleeve H2320. Other parts are locating ring FR215x5 of which two are required per unit.
- SNL507+606+1306EKTN9+H306 Manica adattatore a blocchi split - SNL507+606+1306EKTN9+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1306EKTN9 are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FRB7.5/72 of which two are required per unit.
- SNL506+605+1305EKTN9+H305 Manica adattatore a blocchi split - SNL506+605+1305EKTN9+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1305EKTN9 are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FRB7.5/62 of which two are required per unit.
- SNL508+607+22208EK+H308 Manica adattatore blocco diviso - SNL508+607+22208EK+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22208EK are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRB8/80 of which two are required per unit.
- SNL507+606+2306K+H2306 Manica adattatore blocco diviso - SNL507+606+2306K+H2306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2306K are attached to the shaft using an adapter sleeve H2306. Other parts are locating ring FRB3.5/72 of which two are required per unit.
- SNL508+607+2208EKTN9+H308 Manica adattatore a blocchi split - SNL508+607+2208EKTN9+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2208EKTN9 are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRB8/80 of which two are required per unit.
- SNL506+605+1206EKTN9+H206 Manica adattatore a blocchi split - SNL506+605+1206EKTN9+H206 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1206EKTN9 are attached to the shaft using an adapter sleeve H206. Other parts are locating ring FRB8/62 of which two are required per unit.
- SNL510+608+1308EKTN9+H308 Manica adattatore a blocchi split - SNL510+608+1308EKTN9+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1308EKTN9 are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRB9/90 of which two are required per unit.
- SNL506+605+22206EK+H306 Manica adattatore blocco diviso - SNL506+605+22206EK+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22206EK are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FRB6/62 of which two are required per unit.
- SNL510+608+2308EKTN9+H2308E Manica adattatore a blocchi split - SNL510+608+2308EKTN9+H2308E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2308EKTN9 are attached to the shaft using an adapter sleeve H2308E. Other parts are locating ring FRB4/90 of which two are required per unit.
- SNL509+1209EKTN9+H209 Manicotto adattatore blocco diviso - SNL509+1209EKTN9+H209 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1209EKTN9 are attached to the shaft using an adapter sleeve H209. Other parts are locating ring FRB5.5/85 of which two are required per unit.
- SNL509+22209EK+H309 Manica adattatore blocco diviso - SNL509+22209EK+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22209EK are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRB3.5/85 of which two are required per unit.
- SNL511+609+22309EK+H2309 Manica adattatore blocco diviso - SNL511+609+22309EK+H2309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22309EK are attached to the shaft using an adapter sleeve H2309. Other parts are locating ring FRB4/100 of which two are required per unit.
- SNL508+607+1307EKTN9+H307 Manica adattatore blocco diviso - SNL508+607+1307EKTN9+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1307EKTN9 are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FRB9/80 of which two are required per unit.
- SNL512+610+2310K+H2310 Manica adattatore a blocchi split - SNL512+610+2310K+H2310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2310K are attached to the shaft using an adapter sleeve H2310. Other parts are locating ring FRB4/110 of which two are required per unit.
- SNL510+608+22308EK+H2308E Custodia adattatore a blocchi split - SNL510+608+22308EK+H2308E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22308EK are attached to the shaft using an adapter sleeve H2308E. Other parts are locating ring FRB4/90 of which two are required per unit.
- SNL510+608+C2210KTN9+H310E Custodia adattatore a blocchi split - SNL510+608+C2210KTN9+H310E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2210KTN9 are attached to the shaft using an adapter sleeve H310E. Other parts are locating ring FRB9/90 of which two are required per unit.
- SNL509+2209EKTN9+H309 Manicotto adattatore blocco diviso - SNL509+2209EKTN9+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2209EKTN9 are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRB3.5/85 of which two are required per unit.
- SNL512+610+21310EK+H310 Manica adattatore blocco diviso - SNL512+610+21310EK+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21310EK are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRB10.5/110 of which two are required per unit.
- SNL510+608+21308EK+H308 Manica adattatore blocco diviso - SNL510+608+21308EK+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21308EK are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FRB9/90 of which two are required per unit.
- SNL512+610+2212EKTN9+H312 Manica adattatore blocco diviso - SNL512+610+2212EKTN9+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2212EKTN9 are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRB10/110 of which two are required per unit.
- SNL509+C2209KTN9+H309E Manicotto adattatore blocco diviso - SNL509+C2209KTN9+H309E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2209KTN9 are attached to the shaft using an adapter sleeve H309E. Other parts are locating ring FRB3.5/85 of which two are required per unit.
- SNL511+609+1309EKTN9+H309 Manica adattatore a blocchi split - SNL511+609+1309EKTN9+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1309EKTN9 are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FRB9.5/100 of which two are required per unit.
- SNL510+608+22210 EK+H310 Manica adattatore blocco diviso - SNL510+608+22210 EK+H310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22210 EK are attached to the shaft using an adapter sleeve H310. Other parts are locating ring FRB9/90 of which two are required per unit.
- SNL511+609+2309EKTN9+H2309 Manica adattatore a blocchi split - SNL511+609+2309EKTN9+H2309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2309EKTN9 are attached to the shaft using an adapter sleeve H2309. Other parts are locating ring FRB4/100 of which two are required per unit.
- SNL515+612+22312EK+H2312 Manica adattatore blocco diviso - SNL515+612+22312EK+H2312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22312EK are attached to the shaft using an adapter sleeve H2312. Other parts are locating ring FRB5/130 of which two are required per unit.
- SNL515+612+21312EK+H312 Manica adattatore blocco diviso - SNL515+612+21312EK+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21312EK are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FRB12.5/130 of which two are required per unit.
- SNL515+612+2312K+H2312 Manica adattatore blocco diviso - SNL515+612+2312K+H2312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2312K are attached to the shaft using an adapter sleeve H2312. Other parts are locating ring FRB5/130 of which two are required per unit.
- SNL512+610+22310EK+H2310 Manica adattatore a blocchi split - SNL512+610+22310EK+H2310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22310EK are attached to the shaft using an adapter sleeve H2310. Other parts are locating ring FRB4/110 of which two are required per unit.
- SNL513+611+1311EKTN9+H311 Manica adattatore blocco diviso - SNL513+611+1311EKTN9+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1311EKTN9 are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FRB11/120 of which two are required per unit.
- SNL513+611+22213EK+H313 Manica adattatore blocco diviso - SNL513+611+22213EK+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22213EK are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRB10/120 of which two are required per unit.
- SNL511+609+1211EKTN9+H211 Manica adattatore blocco diviso - SNL511+609+1211EKTN9+H211 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1211EKTN9 are attached to the shaft using an adapter sleeve H211. Other parts are locating ring FRB11.5/100 of which two are required per unit.
- SNL515+612+22215EK+H315 Manica adattatore blocco diviso - SNL515+612+22215EK+H315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22215EK are attached to the shaft using an adapter sleeve H315. Other parts are locating ring FRB12.5/130 of which two are required per unit.
- SNL512+610+12EKTN9+H212 custodia adattatore blocco diviso - SNL512+610+1212EKTN9+H212 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1212EKTN9 are attached to the shaft using an adapter sleeve H212. Other parts are locating ring FRB13/110 of which two are required per unit.
- SNL513+611+2213EKTN9+H313 Manicotto adattatore blocco diviso - SNL513+611+2213EKTN9+H313 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2213EKTN9 are attached to the shaft using an adapter sleeve H313. Other parts are locating ring FRB10/120 of which two are required per unit.
- SNL518+615+C2315K+H2315 Manica adattatore a blocchi split - SNL518+615+C2315K+H2315 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2315K are attached to the shaft using an adapter sleeve H2315. Other parts are locating ring FRB5/160 of which two are required per unit.
- SNL516+613+2216EKTN9+H316 Manicotto adattatore blocco diviso - SNL516+613+2216EKTN9+H316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2216EKTN9 are attached to the shaft using an adapter sleeve H316. Other parts are locating ring FRB12.5/140 of which two are required per unit.
- SNL519+616+C2316K+H2316 Manica adattatore a blocchi split - SNL519+616+C2316K+H2316 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2316K are attached to the shaft using an adapter sleeve H2316. Other parts are locating ring FRB5/170 of which two are required per unit.
- SNL520+617+21317EK+H317 Manica adattatore blocco diviso - SNL520+617+21317EK+H317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21317EK are attached to the shaft using an adapter sleeve H317. Other parts are locating ring FRB14.5/180 of which two are required per unit.
- SNL518+615+23218 CCK/W33+H2318 Manica adattatore a blocchi split - SNL518+615+23218 CCK/W33+H2318 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 23218 CCK/W33 are attached to the shaft using an adapter sleeve H2318. Other parts are locating ring FRB6.25/160 of which two are required per unit.
- SNL516+613+C2216K+H316E Manicotto adattatore a blocchi split - SNL516+613+C2216K+H316E are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C2216K are attached to the shaft using an adapter sleeve H316E. Other parts are locating ring FRB12.5/140 of which two are required per unit.
- SNL520+617+C 2317K+H2317 Manica adattatore a blocchi split - SNL520+617+C 2317K+H2317 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, C 2317K are attached to the shaft using an adapter sleeve H2317. Other parts are locating ring FRB5/180 of which two are required per unit.
- SNL519+616+22219EK+H319 Manica adattatore blocco diviso - SNL519+616+22219EK+H319 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22219EK are attached to the shaft using an adapter sleeve H319. Other parts are locating ring FRB12.5/170 of which two are required per unit.
- SNL520+617+22220EK+H320 Manica adattatore blocco diviso - SNL520+617+22220EK+H320 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22220EK are attached to the shaft using an adapter sleeve H320. Other parts are locating ring FRB12/180 of which two are required per unit.
- SNC505+1205K+H205 Manica adattatore blocco diviso - SNC505+1205K+H205 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1205K are attached to the shaft using an adapter sleeve H205. Other parts are locating ring FR52x5 of which two are required per unit.
- SNC505+2205K+H305 Manica adattatore blocco diviso - SNC505+2205K+H305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2205K are attached to the shaft using an adapter sleeve H305. Other parts are locating ring FR52x3.5 of which two are required per unit.
- SNC606+21306K+H306 Manica adattatore blocco diviso - SNC606+21306K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21306K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FR72x7.5 of which two are required per unit.
- SNC605+2305K+H2305 Manica adattatore blocco diviso - SNC605+2305K+H2305 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2305K are attached to the shaft using an adapter sleeve H2305. Other parts are locating ring FR62x4 of which two are required per unit.
- SNC507+1207K+H207 Manica adattatore blocco diviso - SNC507+1207K+H207 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1207K are attached to the shaft using an adapter sleeve H207. Other parts are locating ring FR72x8.5 of which two are required per unit.
- SNC507+2207K+H307 Manica adattatore blocco diviso - SNC507+2207K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2207K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FR72x5.5 of which two are required per unit.
- SNC506+22206K+H306 Manica adattatore blocco diviso - SNC506+22206K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22206K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FR62x6 of which two are required per unit.
- SNC607+1307K+H307 Manica adattatore blocco diviso - SNC607+1307K+H307 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1307K are attached to the shaft using an adapter sleeve H307. Other parts are locating ring FR80x9 of which two are required per unit.
- SNC506+1206K+H206 Manica adattatore a blocchi split - SNC506+1206K+H206 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1206K are attached to the shaft using an adapter sleeve H206. Other parts are locating ring FR62x8 of which two are required per unit.
- SNC506+2206K+H306 Manica adattatore blocco diviso - SNC506+2206K+H306 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2206K are attached to the shaft using an adapter sleeve H306. Other parts are locating ring FR62x6 of which two are required per unit.
- SNC508+22208K+H308 Manica adattatore blocco diviso - SNC508+22208K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22208K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FR80x8 of which two are required per unit.
- SNC608+21308K+H308 Manica adattatore blocco diviso - SNC608+21308K+H308 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21308K are attached to the shaft using an adapter sleeve H308. Other parts are locating ring FR90x9 of which two are required per unit.
- SNC508+1208K+H208 Manica adattatore a blocchi split - SNC508+1208K+H208 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1208K are attached to the shaft using an adapter sleeve H208. Other parts are locating ring FR80x10.5 of which two are required per unit.
- SNC509+2209K+H309 Manica adattatore a blocchi split - SNC509+2209K+H309 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2209K are attached to the shaft using an adapter sleeve H309. Other parts are locating ring FR85x3.5 of which two are required per unit.
- SNC610+22310K+H2310 Manica adattatore a blocchi split - SNC610+22310K+H2310 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22310K are attached to the shaft using an adapter sleeve H2310. Other parts are locating ring FR110x4 of which two are required per unit.
- SNC611+2311K+H2311 Manica adattatore a blocchi split - SNC611+2311K+H2311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2311K are attached to the shaft using an adapter sleeve H2311. Other parts are locating ring FR120x4 of which two are required per unit.
- SNC512+12K+H212 Manica adattatore blocco diviso - SNC512+1212K+H212 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 1212K are attached to the shaft using an adapter sleeve H212. Other parts are locating ring FR110x13 of which two are required per unit.
- SNC612+21312K+H312 Manica adattatore blocco diviso - SNC612+21312K+H312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 21312K are attached to the shaft using an adapter sleeve H312. Other parts are locating ring FR130x12.5 of which two are required per unit.
- SNC612+2312K+H2312 Manica adattatore a blocchi split - SNC612+2312K+H2312 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 2312K are attached to the shaft using an adapter sleeve H2312. Other parts are locating ring FR130x5 of which two are required per unit.
- SNC511+22211K+H311 Manica adattatore blocco diviso - SNC511+22211K+H311 are manufactured in compliance with DIN EN 1961. The bearings with tapered bore inner, 22211K are attached to the shaft using an adapter sleeve H311. Other parts are locating ring FR100x9.5 of which two are required per unit.
- Dunlop Ucp Np Blocco Cuscino Di Alta Qualità Alloggiamento Unità Cuscinetto Autolubante - HIGH QUALITY DUNLOP UCP NP PILLOW BLOCK HOUSING SELF LUBE BEARING UNIT.
- Nuovo REXNORD BS227155 Flangiato Cuscinetto Con BS227155CARRKIT 3.8cm - NUOVO REXNORD BS227155 CUSCINETTO FLANGIATO CON BS227155CARRKIT 1-1/2" B3/98 BB.
- Cooper 164203 blocco nuovo - COOPER, 16420-3 - STROMVERTEILERBLOCK 3-POLIG 600VAC/DC ().
- H219 FAG Manicotto adattatore - H219 FAG Adaptor Sleeve.
- (UCF204) Cuscinetto di inserimento montato 1 pz cuscinetto sferico quadrato 4 macchie montato - Model: UCF204, UCF205, UCF206(optional). The outer spherical bearing with a housing is a bearing unit that combines a rolling bearing with a bearing housing. Most of the outer spherical bearings are made of a spherical and are mounted together with a bearing housing with a spherical inner hole.
- (UCF204) Cuscinetto montato inserto cuscinetto percorso durevole per macchinari tessili - Model: UCF204, UCF205, UCF206(optional). The outer spherical bearing with a housing is a bearing unit that combines a rolling bearing with a bearing housing. Most of the outer spherical bearings are made of a spherical and are mounted together with a bearing housing with a spherical inner hole.
- (UCFL201) Cuscinetto inserto cuscinetto cuscinetto blocco 2 bulloni alloggiamento per agricoltura per - Pillow Block Bearing is a kind of bearing unit that combines ball bearing and bearing housing. 1 x Pillow Block Bearing. 2-bolt housing with bearing insert for easy installation. Constructed of bearing steel and cast iron housing, high strength and durable.
- (UCF204) Cuscinetto montato inserto cuscinetto 4 blocchi per lavori di produzione Ucf204 - Model: UCF204, UCF205, UCF206(optional). The outer spherical bearing with a housing is a bearing unit that combines a rolling bearing with a bearing housing. Most of the outer spherical bearings are made of a spherical and are mounted together with a bearing housing with a spherical inner hole.
- SF1-3/8 1-3/8" Foro NSK RHP 4 bulloni flangia quadrata cuscinetto in ghisa - Bolt Centres (J) 92mm. Overall Height 46.41mm. Housing Width (L) 117.5mm.
- FAG NJ320-E-XL-M1C3 Nuovo cuscinetto a rulli cilindrici in scatola FAG 100x215x47 - NJ320-E-XL-M1-C3 Cylindrical Roller Bearing Single Row. Bore C - Cylindrical Bore. Technical details (2RS) E=Increased Load Capacity. XL=X-Life. M1=Solid Brass Cage, Two Piece, Roller Guided. C3=Internal Clearance Larger Than Normal.
- UCT205 ST25 Cuscinetto unità di presa
- Fyh - NAA209-27KR - Inserto Cuscinetto 1-2.7cm Foro Eccentrico -b&g Vxs- (Nuovo - Il nostro negozio Il nostro feedback Aggiungici ai tuoi preferiti Nuovo arrivo Finendo presto Cordiali salutiInserire il cuscinetto eccentrico alesaggio 1-11/16".Bell & Gosset VXS MPN: NAA209-27KR NUOVO nella SCATOLA***Si prega di leggere***(Scatola sigillata, aperta per foto.)FYH - NAA209-27KR - Inserto cuscinetto 1-11/16" foro eccentrico -B&G VXS-(NUOVO in SCATOLA)___ ___ MD Industrial Salvage acquista spesso interi stock di parti e forniture di fascia alta per l'industria, l'elettricità, l'automazione, la produzione e l'elaborazione PLC da aziende in transizione. Potrebbe trattarsi di fabbriche, officine meccaniche, distributori o negozi che si stanno trasferendo, aggiornando o chiudendo.
- INA Block House - PSHE20-XL-N, 20 mm blocco pilastro ID - 78:PSHE20 INA 20mm Pillow Block Housed. Product SpecificationAlternative Part NumberPSHE20-XL-NBolt Hole Centre (J)50.8mmBore Size (d)20mmHeight (H2)64mmHousing Width (A)32mmRHP EquivalentSNP20ECTotal Length (L)65mmReferencePSHE20
- SFT35 35 mm foro NSK RHP cuscinetto flangia in ghisa - SFT35 RHP 35mm Flanged Bearing. SFT normal duty 2 bolt flanged bearing unit complete with bearing insert. The cast iron housing includes a grease nipple for re-lubrication. The bearing insert has two grub screws for tightening against the shaft once fitted.
- SFT1-1/2 1-1/2" Cuscinetto flangia in ghisa alesa NSK RHP - RHP SFT Series 2 Bolt Oval Cast Iron Housings: Bearing units supplied with a full width sealed bearing insert fitted in the cast iron housing and includes a grease nipple to facilitate re-lubrication.
- ST30 30 mm foro NSK RHP cuscinetto di presa in ghisa - RHP designation: ST30. RHP Cast iron take up unit 30mm bore - Basic Bearing Insert: 1030-30, Casting Group: ST4. Casting group: 4. Basic bearing insert: 1030. Rec max speed: 5300 rev/min.
- ST30 30 mm foro NSK RHP cuscinetto di presa in ghisa - 50: ST30 30mm Bore NSK RHP Cast Iron Take Up Bearing.
- SF60 60 mm foro NSK RHP 4 bulloni flangia quadrata cuscinetto in ghisa - SF60 RHP Self-Lube 4 Bolt Flange Bearing Unit 60mm Shaft RHP SF Flanged Series - also know as Self Lube units. Supplied with a sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication.
- SL1-11/16DEC RHP Unità cuscinetto alloggiata blocco cuscino - albero 1 11/16" - 31:SL1-11/16DEC RHP Pillow Block Housed Bearing Unit - 1 11/16" Shaft. Brand: RHPMeasurement Unit ImperialShaft Diameter (d) 42.86mmInsert Type DEC - Eccetric CollarBolt Centres (J) 141.5-161.5mmShaft Height (H) 52.37mmHousing Length (L) 197.5mmOverall Height 106.4mm
- SF30 Cuscinetto in ghisa flangia quadrata a 4 bulloni foro 30 mm - 26:SF30 30mm Bore Koyo 4 Bolt Square Flange Cast Iron Bearing.
- SF30 30 mm foro NSK RHP 4 bulloni flangia quadrata cuscinetto in ghisa - RHP SF Flanged Series - also know as Self Lube units. Supplied with a sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication. Casting group: 4. Basic Bearing Insert: 1030.
- MSF45, FYH, Unità cuscinetto flangiato quadrata a quattro bulloni 45 mm foro - 19:MSF45, FYH, Self Lube Square four bolt flanged bearing unit 45mm Bore.
- SFT25 25 mm foro flangia NSK RHP ghisa - 17:SFT25 25mm Bore NSK RHP Cast Iron Flange Bearing. SFT25 RHP 25mm Flanged Bearing SFT normal duty 2 bolt flanged bearing unit complete with bearing insert. The cast iron housing includes a grease nipple for re-lubrication. The bearing insert has two grub screws for tightening against the shaft once fitted. Made up of SFT3CAS Housing and 1025-25G Insert. The inserts can be removed allowing you to replace with a new insert once required which can be ordered separately.
- UCF205-16 LDK Cuscinetto flangiato 1 pollice - UCF normal duty 4 bolt flanged bearing unit complete with bearing insert. The cast iron housing includes a grease nipple for re-lubrication. The bearing insert has two grub screws for tightening against the shaft once fitted.
- RHP St2 Cuscinetto di presa 50 mm Foro - 6: RHP St2 Take Up Bearing 50mm Bore. 50 mm shaft or bore email if any queries
- 2 - NUOVA SKF TU40TF (= ST 40) unità di presa cuscinetti a Y con alloggiamento in fusione 2 pz. - Carriage is inc. (UK Mainland). if for qty 2 pcs. 40mm take up units.
- Nuovo NTN UC211-200D1 Cuscinetto UC211200D1 - NUOVO CUSCINETTO NTN UC211-200D1 UC211200D1 BB13 BB.
- LFTC20 20 mm foro NSK RHP cuscinetto flangia in ghisa nuovo scatola OEM
- KOYO Sfera Inserto Cuscinetto Sb 203 - CUSCINETTO INSERTO A SFERE KOYO SB 203 Accettiamo pagamenti solo tramite PAYPAL Politica di restituzione entro 30 giorni Elaborerà l'ordine in 1 giorni lavorativi una volta ricevuto il pagamento Sentiti libero di contattarci per qualsiasi richiesta di prodotto Tutte le richieste sui prodotti verranno ripristinate entro 24 ore lavorative.
- Fafnir - RAK 2.9cm Cuscino Blocco Cuscinetto, Fisso, Standard Ruolo (come Nuovo) - Il nostro negozio Il nostro feedback Aggiungici ai tuoi preferiti Nuovo arrivo Finendo presto FAFNIRCuscino per servizio standard 1-1/8"Diametro alberoCodice: RAK 1-1/8, RAK11/8 NUOVO nella SCATOLA***Si prega di leggere***(L'articolo ha la sua confezione originale. La scatola è un po' sporca per l'usura da scaffale ma il cuscinetto è nuovo e pronto per essere messo in servizio.)FAFNIR - RAK 1-1/8 poll.
- Fafnir - TAK 2.9cm Cuscino Blocco Cuscinetto, Fisso, Standard Ruolo (come Nuovo) - Il nostro negozio Il nostro feedback Aggiungici ai tuoi preferiti Nuovo arrivo Finendo presto FAFNIRCuscino per servizio standard 1-1/8"Diametro alberoCodice: TAK 1-1/8, TAK11/8 NUOVO nella SCATOLA***Si prega di leggere***(L'articolo ha la sua confezione originale. La scatola è un po' sporca per l'usura da scaffale ma il cuscinetto è nuovo e pronto per essere messo in servizio.)FAFNIR - TAK 1-1/8 poll.
- 1135-1.3/8 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The body is manufactured in RHP.
- 1150-1.15/16 Imperial 1100 Series - Inserti con anello esterno parallelo - Set vignette - The body is manufactured in RHP.
- 1035-1.7/16DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - - The body is manufactured in RHP.
- 1220-3/4G Imperial serie 1200G - Inserti con anello esterno sferico - intero - The body is manufactured in RHP.
- 1220-3/4EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Eccent - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1175-2.15/16DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - EC - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1235-1.1/4EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Ecce - The body is manufactured in RHP.
- 1220-3/4ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ecce - The body is manufactured in RHP.
- 1217-1/2ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ecce
- 1225-15/16ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ec - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1245-1.3/4ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ec - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1140-1.3/8 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1145-1.1/2 Imperial 1100 Series - Inserti con anello esterno parallelo - Set viti
- 1020-3/4DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico - Ecc
- Serie 1035-1.3/8DECG Imperial 1000DECG - Inserti con anello esterno sferico - E
- 1045-1.11/16DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1055-2DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - Ecce - The body is manufactured in RHP.
- 1230-1.1/4G serie imperiale 1200G - Inserti con anello esterno sferico - intero - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1230-1.1/4EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Ecce - The body is manufactured in RHP.
- 1140-1.1/2DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Ecce - The body is manufactured in RHP.
- 1225-7/8ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1230-1.1/8ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ec
- 1235-1.3/8EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1230-1.3/16ECG serie imperiale 1200DECG - Inserti con anello esterno sferico - E - The body is manufactured in RHP.
- 1225-1ECG Imperial serie 1200DECG - Inserti con anello esterno sferico - Eccent - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1245-1.3/4EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1240-1.1/2ECG serie imperiale 1200DECG - Inserti con anello esterno sferico - EC
- 1230-1.1/4ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ec - The body is manufactured in RHP.
- 1235-1.1/4ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ec - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1130-1.3/16 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1040-1.1/2DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - E - The body is manufactured in RHP.
- 1050-1.15/16DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico -
- 1135-1.3/8DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1130-1.1/4DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1225-1EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Eccentri - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1217-5/8ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ecce - The body is manufactured in RHP.
- 1155-2.3/16DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - ecc - The body is manufactured in RHP.
- 1235-1.7/16ECG serie imperiale 1200DECG - Inserti con anello esterno sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1250-1.15/16ECG serie imperiale 1200DECG - Inserti con anello esterno sferico - - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1245-1.11/16ECG serie imperiale 1200DECG - Inserti con anello esterno sferico - - The body is manufactured in RHP.
- 1245-1.5/8ECG Imperial 1200DECG Serie - Inserti con Anello Esterno Sferico - Ec - The body is manufactured in RHP.
- 1245-45G Metric serie 1200G - Inserti con anello esterno sferico - Se intero - This 1245-45G has a 45 mm Bore Size with a distance through the bore of 41,18mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1120-20DEC Metric serie 1100DEC - Inserti con anello esterno parallelo - eccentrico - This 1120-20DEC has a 20 mm Bore Size with a distance through the bore of 43,62mm and an overall width of -mm.
- 1230-30EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1230-30EC has a 30 mm Bore Size with a distance throgh the bore of 35,68mm and a overall width of -mm.
- 1225-25ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1225-25ECG has a 25 mm Bore Size with a distance through the bore of 30,92mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1025-1G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti T - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1017-5/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti
- 1045-1.3/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1040-1.7/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The body is manufactured in RHP.
- 1050-2G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti T
- 1055-2.1/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1060-2.3/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1040-1.1/2G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1055-2G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti T - The body is manufactured in RHP.
- 1085-3.3/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1070-2.11/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S
- 3095-3.15/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1140-1.1/2 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1130-1.1/4 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti
- 1025-1DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - Ecce - The body is manufactured in RHP.
- 1030-1.3/16DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1030-1.1/8DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico - E - The body is manufactured in RHP.
- 1175-2.15/16 Imperial 1100 Series - Inserti con anello esterno parallelo - Set vignette - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1060-2.7/16DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico - - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1045-1.3/4DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1045-1.5/8DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1065-2.1/2DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1230-1.3/16EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Ecc
- 1050-50DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1050-50DECG has a 50 mm Bore Size with a distance through the bore of 62,70mm and an overall width of -mm.
- Serie 1235-35G metrica 1200G - Inserti con anello esterno sferico - Se intero - This 1235-35G has a 35 mm Bore Size with a distance through the bore of 34,90mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1240-40EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1240-40EC has a 40 mm Bore Size with a distance through the bore of 43,64mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1130-30DEC Metric serie 1100DEC - Inserti con anello esterno parallelo - eccentrico - This 1130-30DEC has a 30 mm Bore Size with a distance through the bore of 48,42mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1025-7/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti - The body is manufactured in RHP.
- 1030-1G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti T - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES204-12G2 Inserti Imperiali con Anello Esterno Sferico - Colla Bloccaggio Eccentrico - The body is manufactured in SNR.
- 1035-1.1/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1040-1.3/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1020-3/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti - The body is manufactured in RHP.
- 1045-1.1/2G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1045-1,5/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1050-1.7/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1050-1.3/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1050-1,15/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1035-1.3/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1055-1,15/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S - The body is manufactured in RHP.
- 1055-2.3/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1050-1.11/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S - The body is manufactured in RHP.
- 1045-1.11/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S
- 1060-2.1/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr
- 1070-2.1/2G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1075-2.3/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1075-2.7/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1065-2.1/2G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1060-2.3/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1080-2.15/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S
- 1070-2.7/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1080-3.1/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1085-3.3/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1075-3G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti T - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1117-1/2 Imperial 1100 Series - Inserti con anello esterno parallelo - Set pneumatici a vite - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1085-3.7/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc
- 1090-3.1/2G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1125-7/8 Imperial serie 1100 - Inserti con anello esterno parallelo - Set pneumatici vite - The body is manufactured in RHP.
- 1090-3.7/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The body is manufactured in RHP.
- 1120-3/4 Imperial serie 1100 - Inserti con anello esterno parallelo - Set pneumatici vite - The body is manufactured in RHP.
- 3095-4G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti T - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1055-2.3/16DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico - - The body is manufactured in RHP.
- 1240-1.1/2G serie imperiale 1200G - Inserti con anello esterno sferico - intero - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1225-1G Imperial 1200G Series - Inserti con Anello Esterno Sferico - Intero S - The body is manufactured in RHP.
- 1125-1DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Eccentri - The body is manufactured in RHP.
- 1240-1.1/2EC Imperial 1200DEC Series - Inserti con Anello Esterno Sferico - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1235-1.3/8ECG serie imperiale 1200DECG - Inserti con anello esterno sferico - EC - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1040-40DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1040-40DECG has a 40 mm Bore Size with a distance through the bore of 56,34mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1217-15EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1217-15EC has a 15 mm Bore Size with a distance through the bore of 28,54mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1217-12ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1217-12ECG has a 12 mm Bore Size with a distance through the bore of 28,54mm and an overall width of -mm.
- 1025-15/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES205-14G2 Inserti Imperiali con Anello Esterno Sferico - Colla Bloccaggio Eccentrico - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1030-1.3/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The body is manufactured in RHP.
- 1030-1.1/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The body is manufactured in RHP.
- 1030-1.1/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr
- 1035-1.3/8G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1075-2,15/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1060-2,7/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc - The body is manufactured in RHP.
- 1085-3.1/4G Imperial serie 1000G - Inserti con anello esterno sferico - Set scr - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1075-2.11/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set S - The body is manufactured in RHP.
- 1080-3G Imperial 1000G Series - Inserti con Anello Esterno Sferico - Set Vite T - The body is manufactured in RHP.
- Serie 1117-5/8 Imperial 1100 - Inserti con anello esterno parallelo - Set pneumatici vite
- 1135-1.1/4 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The body is manufactured in RHP.
- 1135-1.7/16 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1160-2.7/16 Imperial serie 1100 - Inserti con anello esterno parallelo - Set viti - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1145-1.11/16 Imperial 1100 Series - Inserti con anello esterno parallelo - Set vignette - The body is manufactured in RHP.
- 1035-1.1/4DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1030-1.1/4DECG Imperial serie 1000DECG - Inserti con anello esterno sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1060-2.1/4DECG Imperial 1000DECG - Inserti con anello esterno sferico - E - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1075-2.15/16DECG Imperial 1000DECG Serie - Inserti con Anello Esterno Sferico -
- 1235-1.1/4G serie imperiale 1200G - Inserti con anello esterno sferico - intero - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1120-3/4DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Eccent
- 1135-1.1/4DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Ecce - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1130-1.1/8DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - Ecce - The body is manufactured in RHP.
- 1135-1.7/16DEC Imperial serie 1100DEC - Inserti con anello esterno parallelo - ecc
- Serie MSFT1-11/16 MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto - This MSFT1-11/16 has a 1-11/16 mm Bore Size with Bolt hole centres of 157,00mm and a housing height of 39,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB50TF has a 50 mm Bore Size with Bolt hole centres of 157mm and a housing height of 43mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB1.3/4TF Unità flangiate a Y con alloggiamento in fusione con flangia ovale e - This FYTB1.3/4TF has a 1.3/4 mm Bore Size with Bolt hole centres of 148,5mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB30FM Unità flangiate a Y con alloggiamento in fusione con flangia ovale e - This FYTB30FM has a 30 mm Bore Size with Bolt hole centres of 116,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB20FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB20FM has a 20 mm Bore Size with Bolt hole centres of 90mm and a housing height of 29,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB40WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e - This FYTB40WF has a 40 mm Bore Size with Bolt hole centres of 143,5mm and a housing height of 38,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB50WF Unità flangiate a Y con alloggiamento in fusione con flangia ovale e - This FYTB50WF has a 50 mm Bore Size with Bolt hole centres of 157mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX309G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX309G2 has a 45 mm Bore Size with a distance through the bore of 42,9mm and an overall width of 58,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX308G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX308G2 has a 40 mm Bore Size with a distance throgh the bore of 41,3mm and a overall width of 57,1mm.
- EX307G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX307G2 has a 35 mm Bore Size with a distance through the bore of 38,1mm and an overall width of 51,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX317G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX317G2 has a 85 mm Bore Size with a distance through the bore of 84,1mm and an overall width of 109,5mm.
- 1017-12G Metric serie 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1017-12G has a 12 mm Bore Size with a distance through the bore of 27,38mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1035-35G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1035-35G has a 35 mm Bore Size with a distance through the bore of 42,88mm and an overall width of -mm.
- Serie 1040-40G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1040-40G has a 40 mm Bore Size with a distance through the bore of 49,23mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1017-16G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1017-16G has a 16 mm Bore Size with a distance through the bore of 27,38mm and an overall width of -mm.
- Serie 1065-65G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1065-65G has a 65 mm Bore Size with a distance through the bore of 65,07mm and an overall width of -mm.
- 1045-45G Metric serie 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1045-45G has a 45 mm Bore Size with a distance through the bore of 49,23mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1075-65G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1075-65G has a 65 mm Bore Size with a distance through the bore of 77,77mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1080-75G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1080-75G has a 75 mm Bore Size with a distance throgh the bore of 82,55mm and a overall width of -mm.
- Serie 1085-85G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1085-85G has a 85 mm Bore Size with a distance through the bore of 85,72mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1065-60G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1065-60G has a 60 mm Bore Size with a distance through the bore of 65,07mm and an overall width of -mm.
- Serie 1060-60G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1060-60G has a 60 mm Bore Size with a distance through the bore of 65,07mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 3095-95G Metric serie 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 3095-95G has a 95 mm Bore Size with a distance throgh the bore of 117,48mm and a overall width of -mm.
- 1020-20DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1020-20DECG has a 20 mm Bore Size with a distance through the bore of 43,62mm and an overall width of -mm.
- Serie 1075-70G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1075-70G has a 70 mm Bore Size with a distance through the bore of 77,77mm and an overall width of -mm.
- 1035-35DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1035-35DECG has a 35 mm Bore Size with a distance through the bore of 51,18mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1220-20G metrica 1200G - Inserti con anello esterno sferico - Se intero - This 1220-20G has a 20 mm Bore Size with a distance through the bore of 25,77mm and an overall width of -mm.
- Serie 1225-25G metrica 1200G - Inserti con anello esterno sferico - Se intero - This 1225-25G has a 25 mm Bore Size with a distance through the bore of 27,35mm and an overall width of -mm.
- 1055-55DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1055-55DECG has a 55 mm Bore Size with a distance through the bore of 71,44mm and an overall width of -mm.
- 1125-25DEC Metric serie 1100DEC - Inserti con anello esterno parallelo - eccentrico - This 1125-25DEC has a 25 mm Bore Size with a distance throgh the bore of 44,40mm and a overall width of -mm.
- 1217-15ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1217-15ECG has a 15 mm Bore Size with a distance through the bore of 28,54mm and an overall width of -mm.
- 1217-17ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1217-17ECG has a 17 mm Bore Size with a distance through the bore of 28,54mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1235-35EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1235-35EC has a 35 mm Bore Size with a distance through the bore of 38,88mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1230-30ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1230-30ECG has a 30 mm Bore Size with a distance through the bore of 35,68mm and an overall width of -mm.
- FYTJ40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ40TF has a 40 mm Bore Size with Bolt hole centres of 144mm and a housing height of 36mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTJ45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ45TF has a 45 mm Bore Size with Bolt hole centres of 148mm and a housing height of 38mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB1.1/4TF Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB1.1/4TF has a 1.1/4 mm Bore Size with Bolt hole centres of 130mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB40FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB40FM has a 40 mm Bore Size with Bolt hole centres of 143,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB50FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB50FM has a 50 mm Bore Size with Bolt hole centres of 157mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES206G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES206G2 has a 30 mm Bore Size with a distance through the bore of 23,8mm and an overall width of 35,7mm.
- EX316G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX316G2 has a 80 mm Bore Size with a distance through the bore of 81mm and an overall width of 106,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES211G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES211G2 has a 55 mm Bore Size with a distance through the bore of 32,5mm and an overall width of 48,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX218G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX218G2 has a 90 mm Bore Size with a distance through the bore of 55mm and an overall width of 72,5mm.
- 1017-15G Metric serie 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1017-15G has a 15 mm Bore Size with a distance through the bore of 27,38mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX215G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX215G2 has a 75 mm Bore Size with a distance through the bore of 74,6mm and an overall width of 92,1mm.
- Serie 1040-35G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1040-35G has a 35 mm Bore Size with a distance throgh the bore of 49,23mm and a overall width of -mm.
- Serie 1035-30G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1035-30G has a 30 mm Bore Size with a distance through the bore of 42,88mm and an overall width of -mm.
- Serie 1030-30G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1030-30G has a 30 mm Bore Size with a distance through the bore of 38,10mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1045-40G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1045-40G has a 40 mm Bore Size with a distance through the bore of 49,23mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1050-50G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1050-50G has a 50 mm Bore Size with a distance through the bore of 51,59mm and an overall width of -mm.
- EX319G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX319G2 has a 95 mm Bore Size with a distance through the bore of 93,7mm and an overall width of 122,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1030-25G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1030-25G has a 25 mm Bore Size with a distance through the bore of 38,10mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1060-55G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1060-55G has a 55 mm Bore Size with a distance through the bore of 65,07mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1085-80G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1085-80G has a 80 mm Bore Size with a distance through the bore of 85,72mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1070-70G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1070-70G has a 70 mm Bore Size with a distance through the bore of 74,63mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 3095-100G Metric serie 1000G - Inserti con anello esterno sferico - Set viti T - This 3095-100G has a 100 mm Bore Size with a distance through the bore of 117,48mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1025-25DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1025-25DECG has a 25 mm Bore Size with a distance through the bore of 44,40mm and an overall width of -mm.
- Serie 1080-80G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1080-80G has a 80 mm Bore Size with a distance through the bore of 82,55mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1060-60DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1060-60DECG has a 60 mm Bore Size with a distance throgh the bore of 77,82mm and a overall width of -mm.
- Serie 1090-90G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1090-90G has a 90 mm Bore Size with a distance through the bore of 96,04mm and an overall width of -mm.
- 1070-70DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1070-70DECG has a 70 mm Bore Size with a distance through the bore of 85,36mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1075-75DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1075-75DECG has a 75 mm Bore Size with a distance through the bore of 91,72mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1070-65DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1070-65DECG has a 65 mm Bore Size with a distance through the bore of 85,36mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1240-40G metrica 1200G - Inserti con anello esterno sferico - Se intero - This 1240-40G has a 40 mm Bore Size with a distance through the bore of 41,18mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1030-30DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1030-30DECG has a 30 mm Bore Size with a distance throgh the bore of 48,42mm and a overall width of -mm.
- 1045-45DECG Metric serie 1000DECG - Inserti con anello esterno sferico - Eccent - This 1045-45DECG has a 45 mm Bore Size with a distance through the bore of 56,34mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1250-50G metrica 1200G - Inserti con anello esterno sferico - Se intero - This 1250-50G has a 50 mm Bore Size with a distance through the bore of 43,54mm and an overall width of -mm.
- 1220-20EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1220-20EC has a 20 mm Bore Size with a distance through the bore of 30,92mm and an overall width of -mm.
- 1250-50ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1250-50ECG has a 50 mm Bore Size with a distance through the bore of 43,64mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB45TF has a 45 mm Bore Size with Bolt hole centres of 148,5mm and a housing height of 39mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB1.1/2TF Unità flangiate a Y con alloggiamento in fusione con flangia ovale e - This FYTB1.1/2TF has a 1.1/2 mm Bore Size with Bolt hole centres of 143,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB45WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e - This FYTB45WF has a 45 mm Bore Size with Bolt hole centres of 148,5mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- ES202G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES202G2 has a 15 mm Bore Size with a distance through the bore of 19,1mm and an overall width of 28,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX214G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX214G2 has a 70 mm Bore Size with a distance through the bore of 68,2mm and an overall width of 85,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX315G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX315G2 has a 75 mm Bore Size with a distance throgh the bore of 74,6mm and a overall width of 100mm.
- EX314G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX314G2 has a 70 mm Bore Size with a distance through the bore of 68,3mm and an overall width of 92,1mm.
- EX318G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX318G2 has a 90 mm Bore Size with a distance throgh the bore of 87,3mm and a overall width of 115,9mm.
- EX312G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX312G2 has a 60 mm Bore Size with a distance throgh the bore of 61,9mm and a overall width of 79,4mm.
- EX213G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX213G2 has a 65 mm Bore Size with a distance through the bore of 68,2mm and an overall width of 85,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX320G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX320G2 has a 100 mm Bore Size with a distance through the bore of 100mm and an overall width of 128,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX216G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX216G2 has a 80 mm Bore Size with a distance through the bore of 74,6mm and an overall width of 95,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1055-55G Metric serie 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1055-55G has a 55 mm Bore Size with a distance through the bore of 55,55mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1017-17G Metric serie 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1017-17G has a 17 mm Bore Size with a distance through the bore of 27,38mm and an overall width of -mm.
- Serie 1050-45G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1050-45G has a 45 mm Bore Size with a distance through the bore of 51,59mm and an overall width of -mm.
- Serie 1075-75G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1075-75G has a 75 mm Bore Size with a distance through the bore of 77,77mm and an overall width of -mm.
- Serie 1055-50G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1055-50G has a 50 mm Bore Size with a distance throgh the bore of 55,55mm and a overall width of -mm.
- Serie 1070-65G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1070-65G has a 65 mm Bore Size with a distance through the bore of 74,63mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1070-60G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1070-60G has a 60 mm Bore Size with a distance throgh the bore of 74,63mm and a overall width of -mm.
- Serie 1090-85G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1090-85G has a 85 mm Bore Size with a distance through the bore of 96,04mm and an overall width of -mm.
- Serie 1230-30G metrica 1200G - Inserti con anello esterno sferico - Se intero - This 1230-30G has a 30 mm Bore Size with a distance throgh the bore of 31,21mm and a overall width of -mm.
- 1140-40DEC Metric serie 1100DEC - Inserti con anello esterno parallelo - eccentrico - This 1140-40DEC has a 40 mm Bore Size with a distance through the bore of 56,34mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1245-45EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1245-45EC has a 45 mm Bore Size with a distance through the bore of 43,64mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1217-16ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1217-16ECG has a 16 mm Bore Size with a distance throgh the bore of 28,54mm and a overall width of -mm.
- 1225-25EC Metric serie 1200DEC - Inserti con anello esterno sferico - eccentrico - This 1225-25EC has a 25 mm Bore Size with a distance through the bore of 30,92mm and an overall width of -mm.
- 1220-20ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1220-20ECG has a 20 mm Bore Size with a distance through the bore of 30,92mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1235-35ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1235-35ECG has a 35 mm Bore Size with a distance through the bore of 38,88mm and an overall width of -mm.
- 1245-45ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1245-45ECG has a 45 mm Bore Size with a distance through the bore of 43,64mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES203-11G2 Inserti Imperiali con Anello Esterno Sferico - Colla Bloccaggio Eccentrico - The body is manufactured in SNR.
- 1240-40ECG Metric serie 1200DECG - Inserti con anello esterno sferico - eccentrico - This 1240-40ECG has a 40 mm Bore Size with a distance throgh the bore of 43,64mm and a overall width of -mm.
- 1017-1/2G Imperial serie 1000G - Inserti con anello esterno sferico - Set viti - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES205-16G2 Inserti Imperiali con Anello Esterno Sferico - Colla Bloccaggio Eccentrico - The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- 1035-1.7/16G Imperial serie 1000G - Inserti con anello esterno sferico - Set Sc
- Serie MSF85 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF85 has a 85 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 61,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ35TF has a 35 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY50TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY50TR has a 50 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.5/8TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.5/8TF has a 1.5/8 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This FY2TF has a 2 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY30WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY30WF has a 30 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.7/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.7/16TF has a 1.7/16 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY50FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY50FM has a 50 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.1/2TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.1/2TF has a 2.1/2 mm Bore Size with Bolt hole centres of 149,5mm and a housing height of 52,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Unità flangiate a Y 1.1/2fm con alloggiamento in fusione con flangia quadrata e - This FY1.1/2FM has a 1.1/2 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This FY2FM has a 2 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.3/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.3/16FM has a 2.3/16 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY45WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY45WF has a 45 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This FY1FM has a 1 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.3/16WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.3/16WF has a 2.3/16 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/4WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.1/4WF has a 1.1/4 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC3-1/2 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC3-1/2 has a 3-1/2 mm Bore Size with Bolt hole centres of 219,08mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC3-15/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, rotonda per impieghi gravosi - This MFC3-15/16 has a 3-15/16 mm Bore Size with Bolt hole centres of 260,35mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC25TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC25TF has a 25 mm Bore Size with Bolt hole centres of 90mm and a housing height of 27mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-15/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, rotonda per impieghi gravosi - This MFC1-15/16 has a 1-15/16 mm Bore Size with Bolt hole centres of 136,52mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-7/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This MFC1-7/16 has a 1-7/16 mm Bore Size with Bolt hole centres of 111,12mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC40TF has a 40 mm Bore Size with Bolt hole centres of 120mm and a housing height of 36mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-7/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This MFC2-7/16 has a 2-7/16 mm Bore Size with Bolt hole centres of 165,10mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT1-3/16 MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto - This MSFT1-3/16 has a 13/16 mm Bore Size with Bolt hole centres of 130,00mm and a housing height of 31,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT25 MSFT - Flangia a due bulloni, design ovale, resistente con inserto per cuscinetti - This MSFT25 has a 25 mm Bore Size with Bolt hole centres of 116,50mm and a housing height of 29,8mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC50TF has a 50 mm Bore Size with Bolt hole centres of 138mm and a housing height of 40mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTJ20TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ20TF has a 20 mm Bore Size with Bolt hole centres of 90mm and a housing height of 25,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB30TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB30TF has a 30 mm Bore Size with Bolt hole centres of 116,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTJ25TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ25TF has a 25 mm Bore Size with Bolt hole centres of 99mm and a housing height of 27mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB15TF Unità flangiate a Y con alloggiamento fuso con flangia ovale e gr - This FYTB15TF has a 15 mm Bore Size with Bolt hole centres of 76,5mm and a housing height of 26mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT55 MSFT - Flangia a due bulloni, design ovale, resistente con inserto cuscinetto - This MSFT55 has a 55 mm Bore Size with Bolt hole centres of 202,00mm and a housing height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MSFT1-15/16 Serie MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto - This MSFT1-15/16 has a 1-15/16 mm Bore Size with Bolt hole centres of 184,00mm and a housing height of 43,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB35TF has a 35 mm Bore Size with Bolt hole centres of 130mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB35FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB35FM has a 35 mm Bore Size with Bolt hole centres of 130mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB25WF Unità flangiate a Y con alloggiamento in fusione con flangia ovale e - This FYTB25WF has a 25 mm Bore Size with Bolt hole centres of 99mm and a housing height of 30mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB25FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB25FM has a 25 mm Bore Size with Bolt hole centres of 99mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB45FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB45FM has a 45 mm Bore Size with Bolt hole centres of 148,5mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Unità di presa cuscinetti a Y TU20FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU20FM has a 20 mm Bore Size with overall length of 97mm and a base to centre height of 62mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Unità di presa cuscinetti a Y TU30FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU30FM has a 30 mm Bore Size with an overall length of 114mm and a base to centre height of 70mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Unità di presa cuscinetti a Y TU35FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU35FM has a 35 mm Bore Size with overall length of 129mm and a base to centre height of 78mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Unità di presa cuscinetti a Y TU50FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU50FM has a 50 mm Bore Size with overall length of 149mm and a base to centre height of 90mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX202G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX202G2 has a 15 mm Bore Size with a distance through the bore of 34mm and an overall width of 43,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES201G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES201G2 has a 12 mm Bore Size with a distance through the bore of 19mm and an overall width of 28,6mm.
- EX203G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX203G2 has a 17 mm Bore Size with a distance through the bore of 34mm and an overall width of 43,5mm.
- EX201G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX201G2 has a 12 mm Bore Size with a distance throgh the bore of 34mm and a overall width of 43,5mm.
- ES205G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES205G2 has a 25 mm Bore Size with a distance through the bore of 21,4mm and an overall width of 30,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX207G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX207G2 has a 35 mm Bore Size with a distance through the bore of 37,6mm and an overall width of 51,1mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX209G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX209G2 has a 45 mm Bore Size with a distance through the bore of 42,8mm and an overall width of 56,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES208G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES208G2 has a 40 mm Bore Size with a distance through the bore of 30,2mm and an overall width of 43,7mm.
- EX204G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX204G2 has a 20 mm Bore Size with a distance throgh the bore of 34mm and a overall width of 43,5mm.
- EX211G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX211G2 has a 55 mm Bore Size with a distance through the bore of 55,4mm and an overall width of 71,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX313G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX313G2 has a 65 mm Bore Size with a distance through the bore of 65,1mm and an overall width of 85,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie 1025-25G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1025-25G has a 25 mm Bore Size with a distance through the bore of 34,11mm and an overall width of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF2 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserto cuscinetto - This MSF2 has a 2 mm Bore Size with Bolt hole centres of 130,00mm and a housing height of 43,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF60 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF60 has a 60 mm Bore Size with Bolt hole centres of 149,22mm and a housing height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF90 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF90 has a 90 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 61,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY30TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY30TF has a 30 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY50TF has a 50 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ60TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ60TF has a 60 mm Bore Size with Bolt hole centres of 143mm and a housing height of 48mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY60TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY60TR has a 60 mm Bore Size with Bolt hole centres of 143mm and a housing height of 52mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ70TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ70TF has a 70 mm Bore Size with Bolt hole centres of 152mm and a housing height of 50,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY25FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY25FM has a 25 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.5/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.5/16TF has a 1.5/16 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY25WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY25WF has a 25 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2.7/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.7/16TF has a 2.7/16 mm Bore Size with Bolt hole centres of 143mm and a housing height of 52mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY20FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY20FM has a 20 mm Bore Size with Bolt hole centres of 63,5mm and a housing height of 29,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.7/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.7/16FM has a 1.7/16 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Unità flangiate a Y 1.3/4fm con alloggiamento in fusione con flangia quadrata e - This FY1.3/4FM has a 1.3/4 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY40FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY40FM has a 40 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-3/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This MFC1-3/16 has a 1-3/16 mm Bore Size with Bolt hole centres of 104,78mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-1/2 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC1-1/2 has a 1-1/2 mm Bore Size with Bolt hole centres of 111,12mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC2-3/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This MFC2-3/16 has a 2-3/16 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC1-11/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, rotonda per impieghi gravosi - This MFC1-11/16 has a 1-11/16 mm Bore Size with Bolt hole centres of 130,18mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.1/2WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.1/2WF has a 1.1/2 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY50WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY50WF has a 50 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC55TF has a 55 mm Bore Size with Bolt hole centres of 150mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC2-15/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, rotonda per impieghi gravosi - This MFC2-15/16 has a 2-15/16 mm Bore Size with Bolt hole centres of 190,50mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.15/16WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.15/16WF has a 1.15/16 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC30TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC30TF has a 30 mm Bore Size with Bolt hole centres of 100mm and a housing height of 31mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-3/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC1-3/4 has a 1-3/4 mm Bore Size with Bolt hole centres of 130,18mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC35TF has a 35 mm Bore Size with Bolt hole centres of 110mm and a housing height of 34mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-3/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC2-3/4 has a 2-3/4 mm Bore Size with Bolt hole centres of 190,50mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSFT35 MSFT - Flangia a due bulloni, design ovale, resistente con inserto per cuscinetti - This MSFT35 has a 35 mm Bore Size with Bolt hole centres of 143,50mm and a housing height of 34,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MSFT1-1/2 Serie MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto I - This MSFT1-1/2 has a 1-1/2 mm Bore Size with Bolt hole centres of 148,50mm and a housing height of 35,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT2-3/16 MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto - This MSFT2-3/16 has a 2-3/16 mm Bore Size with Bolt hole centres of 202,00mm and a housing height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB17TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB17TF has a 17 mm Bore Size with Bolt hole centres of 76,5mm and a housing height of 26mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB25TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB25TR has a 25 mm Bore Size with Bolt hole centres of 99mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTJ30TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ30TF has a 30 mm Bore Size with Bolt hole centres of 117mm and a housing height of 30,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB25TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB25TF has a 25 mm Bore Size with Bolt hole centres of 99mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTJ50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ50TF has a 50 mm Bore Size with Bolt hole centres of 157mm and a housing height of 40mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB45TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB45TR has a 45 mm Bore Size with Bolt hole centres of 148,5mm and a housing height of 39mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB20TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB20TF has a 20 mm Bore Size with Bolt hole centres of 90mm and a housing height of 29,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB15FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB15FM has a 15 mm Bore Size with Bolt hole centres of 76,5mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB17FM Unità flangiate a Y con alloggiamento fuso con flangia ovale e - This FYTB17FM has a 17 mm Bore Size with Bolt hole centres of 76,5mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB35WF Unità flangiate a Y con alloggiamento in fusione con flangia ovale e - This FYTB35WF has a 35 mm Bore Size with Bolt hole centres of 130mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Unità di presa cuscinetti a Y TU25FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU25FM has a 25 mm Bore Size with overall length of 100mm and a base to centre height of 64mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- TU55FM unità di presa cuscinetti a Y con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU55FM has a 55 mm Bore Size with overall length of 171mm and a base to centre height of 106mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- ES203G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES203G2 has a 17 mm Bore Size with a distance through the bore of 19,1mm and an overall width of 28,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX305G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX305G2 has a 25 mm Bore Size with a distance through the bore of 34,9mm and an overall width of 46,8mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES207G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES207G2 has a 35 mm Bore Size with a distance through the bore of 25,4mm and an overall width of 38,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX210G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX210G2 has a 50 mm Bore Size with a distance through the bore of 49,2mm and an overall width of 62,7mm.
- ES209G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES209G2 has a 45 mm Bore Size with a distance through the bore of 30,2mm and an overall width of 43,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX310G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX310G2 has a 50 mm Bore Size with a distance throgh the bore of 49,2mm and a overall width of 66,6mm.
- ES212G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES212G2 has a 60 mm Bore Size with a distance through the bore of 33,4mm and an overall width of 49,3mm.
- ES210G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES210G2 has a 50 mm Bore Size with a distance through the bore of 30,2mm and an overall width of 43,7mm.
- Serie 1020-20G metrica 1000G - Inserti con anello esterno sferico - Set pneumatici vite - This 1020-20G has a 20 mm Bore Size with a distance throgh the bore of 30,96mm and a overall width of -mm.
- FY25TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY25TR has a 25 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY25TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY25TF has a 25 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ45TF has a 45 mm Bore Size with Bolt hole centres of 105mm and a housing height of 38mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY60TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY60TF has a 60 mm Bore Size with Bolt hole centres of 143mm and a housing height of 52mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ75TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ75TF has a 75 mm Bore Size with Bolt hole centres of 159mm and a housing height of 53,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY7/8TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FY7/8TF has a 0.875 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY55FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY55FM has a 55 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.3/16FM has a 1.3/16 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.15/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.15/16FM has a 1.15/16 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY35FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY35FM has a 35 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY55WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY55WF has a 55 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-3/8 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC1-3/8 has a 1-3/8 mm Bore Size with Bolt hole centres of 111,12mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY3/4FM Unità flangiate a Y con alloggiamento fuso con flangia quadrata e - This FY3/4FM has a 0.75 mm Bore Size with Bolt hole centres of 63,5mm and a housing height of 29,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY60WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY60WF has a 60 mm Bore Size with Bolt hole centres of 143mm and a housing height of 52mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This FY1WF has a 1 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/4FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.1/4FM has a 1.1/4 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC2-1/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC2-1/4 has a 2-1/4 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-11/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, rotonda per impieghi gravosi - This MFC2-11/16 has a 2-11/16 mm Bore Size with Bolt hole centres of 190,50mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC3-1/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC3-1/4 has a 3-1/4 mm Bore Size with Bolt hole centres of 190,50mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-1/2 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC2-1/2 has a 2-1/2 mm Bore Size with Bolt hole centres of 165,10mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC100 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, desi rotondo resistente - This MFC100 has a 100 mm Bore Size with Bolt hole centres of 260,35mm and a housing height of -mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC65TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC65TF has a 65 mm Bore Size with Bolt hole centres of 170mm and a housing height of 50mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC1-1/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This MFC1-1/4 has a 1-1/4 mm Bore Size with Bolt hole centres of 104,78mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT40 MSFT - Flangia a due bulloni, design ovale, resistente con inserto cuscinetto - This MSFT40 has a 40 mm Bore Size with Bolt hole centres of 148,50mm and a housing height of 35,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MSFT1-1/4 Serie MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto I - This MSFT1-1/4 has a 1-1/4 mm Bore Size with Bolt hole centres of 130,00mm and a housing height of 31,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT1-3/8 MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto I - This MSFT1-3/8 has a 1-3/8 mm Bore Size with Bolt hole centres of 143,50mm and a housing height of 34,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC3-7/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This MFC3-7/16 has a 3-7/16 mm Bore Size with Bolt hole centres of 219,08mm and a housing height of -mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MSFT1-3/4 Serie MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto I - This MSFT1-3/4 has a 1-3/4 mm Bore Size with Bolt hole centres of 157,00mm and a housing height of 39,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC45TF has a 45 mm Bore Size with Bolt hole centres of 132mm and a housing height of 38mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB12TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB12TF has a 12 mm Bore Size with Bolt hole centres of 76,5mm and a housing height of 26mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC20TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC20TF has a 20 mm Bore Size with Bolt hole centres of 78mm and a housing height of 25,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC60TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This FYC60TF has a 60 mm Bore Size with Bolt hole centres of 160mm and a housing height of 48mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB30TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB30TR has a 30 mm Bore Size with Bolt hole centres of 116,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSFT30 MSFT - Flangia a due bulloni, design ovale, resistente con inserto cuscinetto - This MSFT30 has a 30 mm Bore Size with Bolt hole centres of 130,00mm and a housing height of 31,4mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSFT45 MSFT - Flangia a due bulloni, design ovale, resistente con inserto cuscinetto - This MSFT45 has a 45 mm Bore Size with Bolt hole centres of 157,00mm and a housing height of 39,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT1-7/16 MSFT - Flangia a due bulloni, design ovale, resistente con cuscinetto - This MSFT1-7/16 has a 1-7/16 mm Bore Size with Bolt hole centres of 143,50mm and a housing height of 34,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTJ35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTJ35TF has a 35 mm Bore Size with Bolt hole centres of 130mm and a housing height of 34mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB35TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB35TR has a 35 mm Bore Size with Bolt hole centres of 130mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSFT50 MSFT - Flangia a due bulloni, design ovale, resistente con inserto cuscinetto - This MSFT50 has a 50 mm Bore Size with Bolt hole centres of 184,00mm and a housing height of 43,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB40TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB40TR has a 40 mm Bore Size with Bolt hole centres of 143,5mm and a housing height of 38,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB40TF has a 40 mm Bore Size with Bolt hole centres of 143,5mm and a housing height of 38,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB3/4TF Portanti a Y flangiati con alloggiamento in fusione con flangia ovale e g - This FYTB3/4TF has a 0.75 mm Bore Size with Bolt hole centres of 90mm and a housing height of 29,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB20TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB20TR has a 20 mm Bore Size with Bolt hole centres of 90mm and a housing height of 29,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB50TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e gr - This FYTB50TR has a 50 mm Bore Size with Bolt hole centres of 157mm and a housing height of 43mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYTB20WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e - This FYTB20WF has a 20 mm Bore Size with Bolt hole centres of 90mm and a housing height of 29,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYTB30WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia ovale e - This FYTB30WF has a 30 mm Bore Size with Bolt hole centres of 116,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Unità di presa cuscinetti a Y TU40FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU40FM has a 40 mm Bore Size with overall length of 145mm and a bast centre height of 88mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Unità di presa cuscinetti a Y TU45FM con alloggiamento in fusione e collo di bloccaggio eccentrico - This TU45FM has a 45 mm Bore Size with overall length of 144mm and a base to centre height of 87mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- ES204G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This ES204G2 has a 20 mm Bore Size with a distance through the bore of 21,4mm and an overall width of 30,9mm.
- EX205G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX205G2 has a 25 mm Bore Size with a distance through the bore of 34,8mm and an overall width of 44,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX306G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX306G2 has a 30 mm Bore Size with a distance throgh the bore of 36,5mm and a overall width of 50mm.
- EX208G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX208G2 has a 40 mm Bore Size with a distance through the bore of 42,8mm and an overall width of 56,3mm.
- EX206G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX206G2 has a 30 mm Bore Size with a distance through the bore of 36,4mm and an overall width of 48,3mm.
- EX212G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX212G2 has a 60 mm Bore Size with a distance through the bore of 61,8mm and an overall width of 77,7mm.
- EX311G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX311G2 has a 55 mm Bore Size with a distance through the bore of 55,6mm and an overall width of 73mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- EX217G2 Inserti Metrici con Anello Esterno Sferico - Tipo Collare di Bloccaggio Eccentrico - This EX217G2 has a 85 mm Bore Size with a distance through the bore of 53,2mm and an overall width of 73,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF1-3/8 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF1-3/8 has a 1-3/8 mm Bore Size with Bolt hole centres of 101,50mm and a housing height of 34,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF1-15/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con orso - This MSF1-15/16 has a 1-15/16 mm Bore Size with Bolt hole centres of 130,00mm and a housing height of 43,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF1-11/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con orso - This MSF1-11/16 has a 1-11/16 mm Bore Size with Bolt hole centres of 111,00mm and a housing height of 39,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF50 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF50 has a 50 mm Bore Size with Bolt hole centres of 130,00mm and a housing height of 43,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF30 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF30 has a 30 mm Bore Size with Bolt hole centres of 92,0mm and a housing height of 31,4mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF70 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF70 has a 70 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 51,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF75 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF75 has a 75 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 55,0mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF1-3/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF1-3/16 has a 1-3/16 mm Bore Size with Bolt hole centres of 92,0mm and a housing height of 31,4mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF2-15/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con orso - This MSF2-15/16 has a 2-15/16 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 55,0mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF1-1/2 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF1-1/2 has a 1-1/2 mm Bore Size with Bolt hole centres of 105,00mm and a housing height of 35,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF3-3/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF3-3/16 has a 3-3/16 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 54,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF3-1/2 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF3-1/2 has a 3-1/2 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 61,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MSF55 Serie MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF55 has a 55 mm Bore Size with Bolt hole centres of 143,00mm and a housing height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ25TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ25TF has a 25 mm Bore Size with Bolt hole centres of 70mm and a housing height of 27mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF100 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto in - This MSF100 has a 100 mm Bore Size with Bolt hole centres of 211,12mm and a housing height of 83,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY30TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY30TR has a 30 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF80 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF80 has a 80 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 54,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY35TF has a 35 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ30TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ30TF has a 30 mm Bore Size with Bolt hole centres of 83mm and a housing height of 31mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY40TF has a 40 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY40TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY40TR has a 40 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY45TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY45TR has a 45 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ55TF has a 55 mm Bore Size with Bolt hole centres of 130mm and a housing height of 43mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY55TF has a 55 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY65TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY65TF has a 65 mm Bore Size with Bolt hole centres of 149,5mm and a housing height of 52,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ80TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ80TF has a 80 mm Bore Size with Bolt hole centres of 165mm and a housing height of 54,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This FY1TF has a 1 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY3/4TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FY3/4TF has a 0.75 mm Bore Size with Bolt hole centres of 63,5mm and a housing height of 29,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/2TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.1/2TF has a 1.1/2 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.1/4TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.1/4TF has a 1.1/4 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.15/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.15/16TF has a 1.15/16 mm Bore Size with Bolt hole centres of 111mm and a housing height of 43mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2.3/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.3/16TF has a 2.3/16 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY17FM Cuscinetti a Y flangiati con alloggiamento in fusione con flangia quadrata e - This FY17FM has a 17 mm Bore Size with Bolt hole centres of 54mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF1-1/4 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF1-1/4 has a 1-1/4 mm Bore Size with Bolt hole centres of 92,0mm and a housing height of 31,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF35 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti dei cuscinetti - This MSF35 has a 35 mm Bore Size with Bolt hole centres of 101,50mm and a housing height of 34,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF1-3/4 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF1-3/4 has a 1-3/4 mm Bore Size with Bolt hole centres of 111,00mm and a housing height of 39,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF1 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserto cuscinetto - This MSF1 has a 1 mm Bore Size with Bolt hole centres of 82,50mm and a housing height of 29,8mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF2-3/4 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF2-3/4 has a 2-3/4 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 51,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF3-1/4 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF3-1/4 has a 3-1/4 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 54,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF95 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF95 has a 95 mm Bore Size with Bolt hole centres of 211,12mm and a housing height of 83,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY17TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY17TF has a 17 mm Bore Size with Bolt hole centres of 54mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF2-7/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF2-7/16 has a 2-7/16 mm Bore Size with Bolt hole centres of 149,22mm and a housing height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ20TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ20TF has a 20 mm Bore Size with Bolt hole centres of 64mm and a housing height of 25,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ40TF has a 40 mm Bore Size with Bolt hole centres of 102mm and a housing height of 36mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY20TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY20TF has a 20 mm Bore Size with Bolt hole centres of 63,5mm and a housing height of 29,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY55TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY55TR has a 55 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ50TF has a 50 mm Bore Size with Bolt hole centres of 111mm and a housing height of 40mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.3/16TF has a 1.3/16 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY5/8TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FY5/8TF has a 0.625 mm Bore Size with Bolt hole centres of 54mm and a housing height of 23,4mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.1/8TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.1/8TF has a 1.1/8 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.3/4TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.3/4TF has a 1.3/4 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYM1.15/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata a - This FYM1.15/16TF has a 1.15/16 mm Bore Size with Bolt hole centres of 130mm and a housing height of 47,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY15/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY15/16TF has a 15/16 mm Bore Size with Bolt hole centres of 70mm and a housing height of 30mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY30FM Cuscinetti a Y flangiati con alloggiamento in fusione con flangia quadrata e - This FY30FM has a 30 mm Bore Size with Bolt hole centres of 82,5mm and a housing height of 32,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY40WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY40WF has a 40 mm Bore Size with Bolt hole centres of 101,5mm and a housing height of 38,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY45FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY45FM has a 45 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY60FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY60FM has a 60 mm Bore Size with Bolt hole centres of 143mm and a housing height of 52mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF1-7/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF1-7/16 has a 1-7/16 mm Bore Size with Bolt hole centres of 101,50mm and a housing height of 34,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF40 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF40 has a 40 mm Bore Size with Bolt hole centres of 105,00mm and a housing height of 35,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF65 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF65 has a 65 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 51,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF45 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti dei cuscinetti - This MSF45 has a 45 mm Bore Size with Bolt hole centres of 111,00mm and a housing height of 39,7mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gru - This SYF50FM has a 50 mm Bore Size with Bolt hole centres of 101,6mm and a base to centre height of 57,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF2-1/2 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF2-1/2 has a 2-1/2 mm Bore Size with Bolt hole centres of 149,22mm and a housing height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF2-11/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con orso - This MSF2-11/16 has a 2-11/16 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 51,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF3-7/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF3-7/16 has a 3-7/16 mm Bore Size with Bolt hole centres of 171,45mm and a housing height of 61,7mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF25 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserti per cuscinetti - This MSF25 has a 25 mm Bore Size with Bolt hole centres of 82,50mm and a housing height of 29,8mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF2-3/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con cuscinetto - This MSF2-3/16 has a 2-3/16 mm Bore Size with Bolt hole centres of 143,00mm and a housing height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MSF3 MSF - Flangia a quattro bulloni, design quadrato, resistente con inserto cuscinetto - This MSF3 has a 3 mm Bore Size with Bolt hole centres of 152,40mm and a housing height of 55,0mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY12TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY12TF has a 12 mm Bore Size with Bolt hole centres of 54mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY20TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY20TR has a 20 mm Bore Size with Bolt hole centres of 63,5mm and a housing height of 29,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY15TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY15TF has a 15 mm Bore Size with Bolt hole centres of 54mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY35TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY35TR has a 35 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MSF3-15/16 MSF - Flangia a quattro bulloni, design quadrato, resistente con orso - This MSF3-15/16 has a 3-15/16 mm Bore Size with Bolt hole centres of 211,12mm and a housing height of 83,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This FY45TF has a 45 mm Bore Size with Bolt hole centres of 105mm and a housing height of 39mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ65TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ65TF has a 65 mm Bore Size with Bolt hole centres of 149mm and a housing height of 50mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ100TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e g - This FYJ100TF has a 100 mm Bore Size with Bolt hole centres of 210mm and a housing height of 70mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1/2TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FY1/2TF has a 0.5 mm Bore Size with Bolt hole centres of 54mm and a housing height of 23,4mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ90TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This FYJ90TF has a 90 mm Bore Size with Bolt hole centres of 187mm and a housing height of 63,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/8TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY1.3/8TF has a 1.3/8 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2.11/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.11/16TF has a 2.11/16 mm Bore Size with Bolt hole centres of 149,5mm and a housing height of 52,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2.1/4TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This FY2.1/4TF has a 2.1/4 mm Bore Size with Bolt hole centres of 143mm and a housing height of 52mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY15FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY15FM has a 15 mm Bore Size with Bolt hole centres of 54mm and a housing height of 26mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY35WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e - This FY35WF has a 35 mm Bore Size with Bolt hole centres of 92mm and a housing height of 34,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY55FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY30FM has a 30 mm Bore Size with Bolt hole centres of 117.5mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.15/16WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SYH1FM has a 1 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 33,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata ed ec - This SYH1WF has a 1 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 33,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-3/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This SYH1.1/4WF has a 1.1/4 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 46,1mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC2-7/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This SY2FM has a 2 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY30FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY2.1/4TF has a 2.1/4 mm Bore Size with Bolt hole centres of 190,5mm and a base to centre height of 69,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY50WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY25WF has a 25 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-3/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This SY1.15/16FM has a 1.15/16 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e larva - This SYF40FM has a 40 mm Bore Size with Bolt hole centres of 88,9mm and a base to centre height of 49,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC100 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, design rotondo resistente - This SYFJ40TF has a 40 mm Bore Size with Bolt hole centres of 84mm and a base to centre height of 49,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY60FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY35FM has a 35 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY60WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY35WF has a 35 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.15/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SYH3/4WF has a 0.75 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 31,8mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-3/8 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SY1.7/16FM has a 1.7/16 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-7/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This SYH1.7/16WF has a 1.7/16 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 46,1mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC1-3/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SY1.3/4FM has a 1.3/4 mm Bore Size with Bolt hole centres of 143,7mm and a base to centre height of 54mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC2-11/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This SY2.3/16FM has a 2.3/16 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC30TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gruba - This SYF25FM has a 25 mm Bore Size with Bolt hole centres of 50,8mm and a base to centre height of 36,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-3/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SYF20TF has a 20 mm Bore Size with Bolt hole centres of 50,8mm and a base to centre height of 33,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC2-15/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This SYF25TF has a 25 mm Bore Size with Bolt hole centres of 50,8mm and a base to centre height of 36,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC3-7/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda - This SYF35TF has a 35 mm Bore Size with Bolt hole centres of 82,6mm and a base to centre height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC3-15/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This SYF45TF has a 45 mm Bore Size with Bolt hole centres of 95,3mm and a base to centre height of 54mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e larva - This SYF30FM has a 30 mm Bore Size with Bolt hole centres of 76,2mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e larva - This SYF50FM has a 50 mm Bore Size with Bolt hole centres of 101,6mm and a base to centre height of 57,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e larva - This SYF45FM has a 45 mm Bore Size with Bolt hole centres of 95,3mm and a base to centre height of 54mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SNP30A Serie SNP montato a piedi - Base corta autoluente in ghisa blocco cuscino uni - This SNP30A has a 30 mm Bore Size with Bolt hole centres of 76,2mm and a base to centre height of 42,90mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SNP2 serie SNP montata a piedi - Unità blocco cuscino in ghisa a base corta autoluente - This SNP2 has a 2 mm Bore Size with Bolt hole centres of 118,0mm and a base to centre height of 63,50mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY40TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SYJ30TF has a 30 mm Bore Size with Bolt hole centres of 118mm and a base to centre height of 42,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY45TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SYJ35TF has a 35 mm Bore Size with Bolt hole centres of 129mm and a base to centre height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY30TF Cuscinetti a Y flangiati con alloggiamento in ghisa con flangia quadrata e gruba - This SY17TF has a 17 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 30,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY25TR has a 25 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY30TR has a 30 mm Bore Size with Bolt hole centres of 117,5mm and a base to centre height of 42,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ80TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY60TF has a 60 mm Bore Size with Bolt hole centres of 190,5mm and a base to centre height of 69,8mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY60TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SYJ50TF has a 50 mm Bore Size with Bolt hole centres of 157,5mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1/2TF has a 0.5 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 30,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.1/4TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY3/4TF has a 0.75 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 33,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY5/8TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SYJ65TF has a 65 mm Bore Size with Bolt hole centres of 203mm and a base to centre height of 76,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY25FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY2TF has a 2 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.5/8TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY1.1/8TF has a 1.1/8 mm Bore Size with Bolt hole centres of 117,5mm and a base to centre height of 49,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYM1.15/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SYJ1.1/4TF has a 1.1/4 mm Bore Size with Bolt hole centres of 129mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.15/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1.1/4TF has a 1.1/4 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY25WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY2.3/16TF has a 2.3/16 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY35WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY2.11/16TF has a 2.11/16 mm Bore Size with Bolt hole centres of 203mm and a base to centre height of 76,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY45WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY20WF has a 20 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 33,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY35FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY2.1/2TF has a 2.1/2 mm Bore Size with Bolt hole centres of 203mm and a base to centre height of 76,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata ed ec - This SY45FM has a 45 mm Bore Size with Bolt hole centres of 143.5mm and a base to centre height of 54mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY3/4FM Unità flangiate a Y con alloggiamento fuso con flangia quadrata e - This SY40FM has a 40 mm Bore Size with Bolt hole centres of 135.5mm and a base to centre height of 49,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY45WF has a 45 mm Bore Size with Bolt hole centres of 143.5mm and a base to centre height of 54mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.1/4WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e a - This SY50WF has a 50 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY45FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY20FM has a 20 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 33,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY50FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY25FM has a 25 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/4FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e a - This SY50FM has a 50 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/2WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e a - This SY60FM has a 60 mm Bore Size with Bolt hole centres of 190.5mm and a base to centre height of 69,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC1-11/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This SYH1.1/2WF has a 1.1/2 mm Bore Size with Bolt hole centres of 135,5mm and a base to centre height of 49,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC20TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e larva - This SYF50TF has a 50 mm Bore Size with Bolt hole centres of 101,6mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYC25TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gruba - This SYF20FM has a 20 mm Bore Size with Bolt hole centres of 50,8mm and a base to centre height of 33,3mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SNP25EC Serie SNP montato a piedi - Blocco cuscino in ghisa a base corta autoluente uno - This SNP25EC has a 25 mm Bore Size with Bolt hole centres of 50,8mm and a base to centre height of 36,50mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SNP1-1/4 serie SNP montato su base corta autoluente blocco cuscino in ghisa u - This SNP1-1/4 has a 1-1/4 mm Bore Size with Bolt hole centres of 82,6mm and a base to centre height of 47,60mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SNP30DEC serie SNP montato a piedi - Blocco cuscino in ghisa a base corta autoluente u - This SNP30DEC has a 30 mm Bore Size with Bolt hole centres of 76,2mm and a base to centre height of 42,90mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SNP45A serie SNP montata a piedi - Base corta autoluente in ghisa blocco cuscino uni - This SNP45A has a 45 mm Bore Size with Bolt hole centres of 95,3mm and a base to centre height of 54,00mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY25TF has a 25 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY35TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY20TR has a 20 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 33,3mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SNP60DEC serie SNP montato a piedi - Blocco cuscino in ghisa a base corta autoluente u - This SNP60DEC has a 60 mm Bore Size with Bolt hole centres of 118,0mm and a base to centre height of 69,90mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ45TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY35TF has a 35 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY50TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SYJ40TF has a 40 mm Bore Size with Bolt hole centres of 136,5mm and a base to centre height of 49,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ70TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SYJ55TF has a 55 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ100TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gr - This SY60TR has a 60 mm Bore Size with Bolt hole centres of 190,5mm and a base to centre height of 69,8mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY60TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY45TR has a 45 mm Bore Size with Bolt hole centres of 143,5mm and a base to centre height of 54mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SYJ90TF has a 90 mm Bore Size with Bolt hole centres of 262mm and a base to centre height of 101,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY65TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY50TR has a 50 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ75TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY55TR has a 55 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY15/16TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e g - This SYJ80TF has a 80 mm Bore Size with Bolt hole centres of 232mm and a base to centre height of 88,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/8TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SYJ100TF has a 100 mm Bore Size with Bolt hole centres of 308mm and a base to centre height of 115mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY3/4TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SYJ70TF has a 70 mm Bore Size with Bolt hole centres of 210mm and a base to centre height of 79,4mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ90TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SYJ60TF has a 60 mm Bore Size with Bolt hole centres of 188,5mm and a base to centre height of 69,8mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.5/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY5/8TF has a 0.625 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 30,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.1/2TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY1.5/8TF has a 1.5/8 mm Bore Size with Bolt hole centres of 143,7mm and a base to centre height of 54mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY1.5/16TF has a 1.5/16 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2.7/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1.1/2TF has a 1.1/2 mm Bore Size with Bolt hole centres of 135,5mm and a base to centre height of 49,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY30WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY2.7/16TF has a 2.7/16 mm Bore Size with Bolt hole centres of 190,5mm and a base to centre height of 69,9mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY17FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY1.15/16TF has a 1.15/16 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY40WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY17FM has a 17 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 30,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY55WF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY30WF has a 30 mm Bore Size with Bolt hole centres of 117.5mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.3/16WF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1.1/4FM has a 1.1/4 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.1/2FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e a - This SY55WF has a 55 mm Bore Size with Bolt hole centres of 171.5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FC1-3/8 FC Series - Flangia a quattro bulloni con cerchio di centraggio, design rotondo - This SYH1.1/4FM has a 1.1/4 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 46,1mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC1-1/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SYH1.3/8WF has a 1.3/8 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 46,1mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-15/16 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, resistente rotonda d - This SYH1.3/4WF has a 1.3/4 mm Bore Size with Bolt hole centres of 143,7mm and a base to centre height of 52,4mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MFC1-1/2 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SY1.1/2FM has a 1.1/2 mm Bore Size with Bolt hole centres of 135,5mm and a base to centre height of 49,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC3-1/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SYF30TF has a 30 mm Bore Size with Bolt hole centres of 76,2mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYC40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia rotonda e gruba - This SYF35FM has a 35 mm Bore Size with Bolt hole centres of 82,6mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SNP55DEC serie SNP montato a piedi - Blocco cuscino in ghisa a base corta autoluente u - This SNP55DEC has a 55 mm Bore Size with Bolt hole centres of 118,0mm and a base to centre height of 63,50mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ40TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY30TF has a 30 mm Bore Size with Bolt hole centres of 117,5mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie SNP1-15/16 piedi montato - Blocco cuscino in ghisa base corta autoluente - This SNP1-15/16 has a 1-15/16 mm Bore Size with Bolt hole centres of 101,6mm and a base to centre height of 57,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY40TR has a 40 mm Bore Size with Bolt hole centres of 135,5mm and a base to centre height of 49,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ60TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY50TF has a 50 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 57,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY35TR Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SYJ25TF has a 25 mm Bore Size with Bolt hole centres of 102,5mm and a base to centre height of 36,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FYJ65TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY55TF has a 55 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY50TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gruba - This SY35TR has a 35 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1/2TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY65TF has a 65 mm Bore Size with Bolt hole centres of 203mm and a base to centre height of 76,2mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FYJ55TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SY45TF has a 45 mm Bore Size with Bolt hole centres of 143,5mm and a base to centre height of 54mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.7/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY15/16TF has a 15/16 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.1/2TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY1TF has a 1 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/8TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY7/8TF has a 0.875 mm Bore Size with Bolt hole centres of 102mm and a base to centre height of 36,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/4TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY1.3/16TF has a 1.3/16 mm Bore Size with Bolt hole centres of 117,5mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY7/8TF Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e gru - This SYJ75TF has a 75 mm Bore Size with Bolt hole centres of 217mm and a base to centre height of 82,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.1/4TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e g - This SY1.7/16TF has a 1.7/16 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY20FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SYM1.15/16TF has a 1.15/16 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 63,5mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.3/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1.3/8TF has a 1.3/8 mm Bore Size with Bolt hole centres of 126mm and a base to centre height of 47,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY40FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY15FM has a 15 mm Bore Size with Bolt hole centres of 97mm and a base to centre height of 30,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY15FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata e e - This SY1.3/4TF has a 1.3/4 mm Bore Size with Bolt hole centres of 143,5mm and a base to centre height of 54mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY2.11/16TF Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1.11/16TF has a 1.11/16 mm Bore Size with Bolt hole centres of 143,7mm and a base to centre height of 54mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1FM Cuscinetti a Y flangiati con alloggiamento fuso con flangia quadrata ed ec - This SY40WF has a 40 mm Bore Size with Bolt hole centres of 135.5mm and a base to centre height of 49,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY1.7/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY55FM has a 55 mm Bore Size with Bolt hole centres of 171.5mm and a base to centre height of 63,5mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- FY1.3/4FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e a - This SY60WF has a 60 mm Bore Size with Bolt hole centres of 190.5mm and a base to centre height of 69,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- FY2.3/16FM Unità flangiate a Y con alloggiamento in fusione con flangia quadrata e - This SY1.3/16FM has a 1.3/16 mm Bore Size with Bolt hole centres of 117,5mm and a base to centre height of 42,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-1/4 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SYH1.15/16WF has a 1.15/16 mm Bore Size with Bolt hole centres of 157mm and a base to centre height of 55,6mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC2-1/2 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SYH2WF has a 2 mm Bore Size with Bolt hole centres of 171,5mm and a base to centre height of 61,9mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MFC3-1/2 Serie MFC - Flangia a quattro bulloni con cerchio di centraggio, duty round des - This SYF40TF has a 40 mm Bore Size with Bolt hole centres of 88,9mm and a base to centre height of 49,2mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie Np75 montata a piedi - Unità blocco cuscino in ghisa autolubante con Bearin - This NP75 has a 75 mm Bore Size with Bolt hole centres of 228,0mm and a base to centre height of 82,6mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- NP2-3/8 piedi montati serie NP - Unità blocco cuscino in ghisa autolubante con Bea - This NP2-3/8 has a 2-3/8 mm Bore Size with Bolt hole centres of 201,0mm and a base to centre height of 69,90mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL15 serie SL montata a piedi - Unità blocco cuscino in ghisa autolubante con orso - This SL15 has a 15 mm Bore Size with Bolt hole centres of 91,5mm and a base to centre height of 26,97mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL5/8EC serie SL montata a piedi - Unità blocco cuscino in ghisa autolubante con Bea - This SL5/8EC has a 5/8 mm Bore Size with Bolt hole centres of 91,5mm and a base to centre height of 26,97mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie SL1EC SL montata a piedi - Unità blocco cuscini in ghisa autolubante con Beari - This SL1EC has a 1 mm Bore Size with Bolt hole centres of 110,2mm and a base to centre height of 33,32mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL1-11/16DEC serie SL montata a piedi - Unità blocco cuscino in ghisa autoluente con - This SL1-11/16DEC has a 1-11/16 mm Bore Size with Bolt hole centres of 161,5mm and a base to centre height of 52,37mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL50 Foot Monted SL Series - Unità blocco cuscino in ghisa autolubante con orso - This SL50 has a 50 mm Bore Size with Bolt hole centres of 177,0mm and a base to centre height of 55,55mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL35DEC serie SL montata a piedi - Unità blocco cuscini in ghisa autolubante con Bea - This SL35DEC has a 35 mm Bore Size with Bolt hole centres of 136,5mm and a base to centre height of 46,02mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL1-1/2DEC serie SL montata a piedi - Unità blocco cuscino in ghisa autoluente con - This SL1-1/2DEC has a 1-1/2 mm Bore Size with Bolt hole centres of 148,0mm and a base to centre height of 49,20mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL1-15/16DEC serie SL montata a piedi - Unità blocco cuscino in ghisa autoluente con - This SL1-15/16DEC has a 1-15/16 mm Bore Size with Bolt hole centres of 177,0mm and a base to centre height of 55,55mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL50DEC serie SL montata a piedi - Unità blocco cuscini in ghisa autolubante con Bea - This SL50DEC has a 50 mm Bore Size with Bolt hole centres of 177,0mm and a base to centre height of 55,55mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL2-1/2DEC serie SL montata a piedi - Unità blocco cuscino in ghisa autoluente con - This SL2-1/2DEC has a 2-1/2 mm Bore Size with Bolt hole centres of 205,00mm and a base to centre height of 68,25mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL55DEC serie SL montata a piedi - Unità blocco cuscino in ghisa autoluente con Bea - This SL55DEC has a 55 mm Bore Size with Bolt hole centres of 178,5mm and a base to centre height of 61,90mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL75 Foot Monted SL Series - Unità blocco cuscino in ghisa autolubante con orso - This SL75 has a 75 mm Bore Size with Bolt hole centres of 241,5mm and a base to centre height of 82,55mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL2-15/16DEC serie SL montata a piedi - Unità blocco cuscino in ghisa autoluente con - This SL2-15/16DEC has a 2-15/16 mm Bore Size with Bolt hole centres of 241,5mm and a base to centre height of 82,55mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MP1-7/16 piedi montato serie MP - Unità blocco cuscino in ghisa autolubante con Be - This MP1-7/16 has a 1-7/16 mm Bore Size with Bolt hole centres of 160,0mm and a base to centre height of 53,98mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL2-1/8 piedi montati serie SL - Unità blocco cuscino in ghisa autolubante con Bea - This SL2-1/8 has a 2-1/8 mm Bore Size with Bolt hole centres of 178,5mm and a base to centre height of 61,90mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL60 Foot Monted SL Series - Unità blocco cuscino in ghisa autolubante con Bearin - This SL60 has a 60 mm Bore Size with Bolt hole centres of 201,0mm and a base to centre height of 68,25mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL2-3/16 piedi montati serie SL - Unità blocco cuscino in ghisa autolubante con Be - This SL2-3/16 has a 2-3/16 mm Bore Size with Bolt hole centres of 178,5mm and a base to centre height of 61,90mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- SL2-7/16 piedi montati serie SL - Unità blocco cuscino in ghisa autolubante con Be - This SL2-7/16 has a 2-7/16 mm Bore Size with Bolt hole centres of 201,0mm and a base to centre height of 68,25mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MP55 montata a piedi - Unità blocco cuscino in ghisa autoluente con orso - This MP55 has a 55 mm Bore Size with Bolt hole centres of 201,0mm and a base to centre height of 69,85mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL2-11/16 piedi montati serie SL - Unità blocco cuscino in ghisa autolubante con B - This SL2-11/16 has a 2-11/6 mm Bore Size with Bolt hole centres of 241,5mm and a base to centre height of 82,55mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MP45 montata a piedi - Unità blocco cuscino in ghisa autoluente con orso - This MP45 has a 45 mm Bore Size with Bolt hole centres of 172,5mm and a base to centre height of 58,72mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL2-15/16 piedi montati serie SL - Unità blocco cuscino in ghisa autolubante con B - This SL2-15/16 has a 2-15/16 mm Bore Size with Bolt hole centres of 241,5mm and a base to centre height of 82,55mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- Serie MP70 montata a piedi - Unità blocco cuscino in ghisa autolubante con orso - This MP70 has a 70 mm Bore Size with Bolt hole centres of 255,6mm and a base to centre height of 88,90mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- MP2-11/16 piedi montato serie MP - Unità blocco cuscino in ghisa autolubante con B - This MP2-11/16 has a 2-11/16 mm Bore Size with Bolt hole centres of 255,6mm and a base to centre height of 88,90mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- MP2-3/16 piedi montati serie MP - Unità blocco cuscino in ghisa autolubante con Be - This MP2-3/16 has a 2-3/16 mm Bore Size with Bolt hole centres of 201,0mm and a base to centre height of 69,85mm. The body is manufactured in Cast Iron and supplied with a re-greasing system to provide for lubrication of the bearing inserts.
- SL70 Foot Monted SL Series - Unità blocco cuscino in ghisa autolubante con Bearin - This SL70 has a 70 mm Bore Size with Bolt hole centres of 241,5mm and a base to centre height of 82,55mm. The simple mounting and low-maintenance operation ensure an economical rolling bearing solution.
- Serie MP2 montata a piedi - Unità blocco cu